| /* |
| * Copyright (c) 2018 Synopsys. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <offsets_short.h> |
| #include <toolchain.h> |
| #include <linker/sections.h> |
| #include <kernel_structs.h> |
| #include <arch/cpu.h> |
| #include <syscall.h> |
| #include <swap_macros.h> |
| #include <v2/irq.h> |
| |
| .macro clear_scratch_regs |
| mov_s r1, 0 |
| mov_s r2, 0 |
| mov_s r3, 0 |
| mov_s r4, 0 |
| mov_s r5, 0 |
| mov_s r6, 0 |
| mov_s r7, 0 |
| mov_s r8, 0 |
| mov_s r9, 0 |
| mov_s r10, 0 |
| mov_s r11, 0 |
| mov_s r12, 0 |
| .endm |
| |
| .macro clear_callee_regs |
| mov_s r25, 0 |
| mov_s r24, 0 |
| mov_s r23, 0 |
| mov_s r22, 0 |
| mov_s r21, 0 |
| mov_s r20, 0 |
| mov_s r19, 0 |
| mov_s r18, 0 |
| mov_s r17, 0 |
| mov_s r16, 0 |
| |
| mov_s r15, 0 |
| mov_s r14, 0 |
| mov_s r13, 0 |
| .endm |
| |
| GTEXT(z_arc_userspace_enter) |
| GTEXT(_arc_do_syscall) |
| GTEXT(z_user_thread_entry_wrapper) |
| GTEXT(arch_user_string_nlen) |
| GTEXT(z_arc_user_string_nlen_fault_start) |
| GTEXT(z_arc_user_string_nlen_fault_end) |
| GTEXT(z_arc_user_string_nlen_fixup) |
| /* |
| * @brief Wrapper for z_thread_entry in the case of user thread |
| * The init parameters are in privileged stack |
| * |
| * @return N/A |
| */ |
| SECTION_FUNC(TEXT, z_user_thread_entry_wrapper) |
| seti _ARC_V2_INIT_IRQ_LOCK_KEY |
| pop_s r3 |
| pop_s r2 |
| pop_s r1 |
| pop_s r0 |
| /* the start of user sp is in r5 */ |
| pop r5 |
| /* start of privilege stack in blink */ |
| mov_s blink, sp |
| |
| st.aw r0, [r5, -4] |
| st.aw r1, [r5, -4] |
| st.aw r2, [r5, -4] |
| st.aw r3, [r5, -4] |
| |
| /* |
| * when CONFIG_INIT_STACKS is enable, stack will be initialized |
| * in z_new_thread_init. |
| */ |
| j _arc_go_to_user_space |
| |
| /** |
| * |
| * User space entry function |
| * |
| * This function is the entry point to user mode from privileged execution. |
| * The conversion is one way, and threads which transition to user mode do |
| * not transition back later, unless they are doing system calls. |
| * |
| */ |
| SECTION_FUNC(TEXT, z_arc_userspace_enter) |
| /* |
| * In ARCv2, the U bit can only be set through exception return |
| */ |
| /* disable stack checking as the stack should be initialized */ |
| _disable_stack_checking blink |
| |
| /* the end of user stack in r5 */ |
| add r5, r4, r5 |
| /* get start of privilege stack, r6 points to current thread */ |
| ld blink, [r6, _thread_offset_to_priv_stack_start] |
| add blink, blink, CONFIG_PRIVILEGED_STACK_SIZE |
| |
| mov_s sp, r5 |
| |
| push_s r0 |
| push_s r1 |
| push_s r2 |
| push_s r3 |
| |
| mov r5, sp /* skip r0, r1, r2, r3 */ |
| |
| /* to avoid the leakage of kernel info, the thread stack needs to be |
| * re-initialized |
| */ |
| #ifdef CONFIG_INIT_STACKS |
| mov_s r0, 0xaaaaaaaa |
| #else |
| mov_s r0, 0x0 |
| #endif |
| _clear_user_stack: |
| st.ab r0, [r4, 4] |
| cmp r4, r5 |
| jlt _clear_user_stack |
| |
| /* reload the stack checking regs as the original kernel stack |
| * becomes user stack |
| */ |
| #ifdef CONFIG_ARC_STACK_CHECKING |
| /* current thread in r6, SMP case is also considered */ |
| mov r2, r6 |
| |
| _load_stack_check_regs |
| |
| _enable_stack_checking r0 |
| #endif |
| |
| /* the following codes are used to switch from kernel mode |
| * to user mode by fake exception, because U bit can only be set |
| * by exception |
| */ |
| _arc_go_to_user_space: |
| lr r0, [_ARC_V2_STATUS32] |
| bset r0, r0, _ARC_V2_STATUS32_U_BIT |
| |
| mov_s r1, z_thread_entry_wrapper1 |
| |
| sr r0, [_ARC_V2_ERSTATUS] |
| sr r1, [_ARC_V2_ERET] |
| |
| /* fake exception return */ |
| lr r0, [_ARC_V2_STATUS32] |
| bset r0, r0, _ARC_V2_STATUS32_AE_BIT |
| kflag r0 |
| |
| /* when exception returns from kernel to user, sp and _ARC_V2_USER_SP |
| * /_ARC_V2_SECU_SP will be switched |
| */ |
| #if defined(CONFIG_ARC_HAS_SECURE) && defined(CONFIG_ARC_SECURE_FIRMWARE) |
| lr r0, [_ARC_V2_SEC_STAT] |
| /* the mode returns from exception return is secure mode */ |
| bset r0, r0, 31 |
| sr r0, [_ARC_V2_ERSEC_STAT] |
| sr r5, [_ARC_V2_SEC_U_SP] |
| #else |
| sr r5, [_ARC_V2_USER_SP] |
| #endif |
| mov_s sp, blink |
| |
| mov_s r0, 0 |
| |
| clear_callee_regs |
| |
| clear_scratch_regs |
| |
| mov fp, 0 |
| mov r29, 0 |
| mov r30, 0 |
| mov blink, 0 |
| |
| rtie |
| |
| /** |
| * |
| * Userspace system call function |
| * |
| * This function is used to do system calls from unprivileged code. This |
| * function is responsible for the following: |
| * 1) Dispatching the system call |
| * 2) Restoring stack and calling back to the caller of the system call |
| * |
| */ |
| SECTION_FUNC(TEXT, _arc_do_syscall) |
| /* |
| * r0-r5: arg1-arg6, r6 is call id which is already checked in |
| * trap_s handler, r7 is the system call stack frame pointer |
| * need to recover r0, r1, r2 because they will be modified in |
| * _create_irq_stack_frame. If a specific syscall frame (different |
| * with irq stack frame) is defined, the cover of r0, r1, r2 can be |
| * optimized. |
| */ |
| ld_s r0, [sp, ___isf_t_r0_OFFSET] |
| ld_s r1, [sp, ___isf_t_r1_OFFSET] |
| ld_s r2, [sp, ___isf_t_r2_OFFSET] |
| |
| mov r7, sp |
| |
| mov_s blink, _k_syscall_table |
| ld.as r6, [blink, r6] |
| |
| jl [r6] |
| |
| /* save return value */ |
| st_s r0, [sp, ___isf_t_r0_OFFSET] |
| |
| mov r29, 0 |
| mov r30, 0 |
| |
| /* through fake exception return, go back to the caller */ |
| lr r0, [_ARC_V2_STATUS32] |
| bset r0, r0, _ARC_V2_STATUS32_AE_BIT |
| kflag r0 |
| |
| |
| #ifdef CONFIG_ARC_SECURE_FIRMWARE |
| ld_s r0, [sp, ___isf_t_sec_stat_OFFSET] |
| sr r0,[_ARC_V2_ERSEC_STAT] |
| #endif |
| ld_s r0, [sp, ___isf_t_status32_OFFSET] |
| sr r0,[_ARC_V2_ERSTATUS] |
| |
| ld_s r0, [sp, ___isf_t_pc_OFFSET] /* eret into pc */ |
| sr r0,[_ARC_V2_ERET] |
| |
| _pop_irq_stack_frame |
| |
| rtie |
| |
| /* |
| * size_t arch_user_string_nlen(const char *s, size_t maxsize, int *err_arg) |
| */ |
| SECTION_FUNC(TEXT, arch_user_string_nlen) |
| /* int err; */ |
| sub_s sp,sp,0x4 |
| |
| /* Initial error value (-1 failure), store at [sp,0] */ |
| mov_s r3, -1 |
| st_s r3, [sp, 0] |
| |
| /* Loop setup. |
| * r12 (position locator) = s - 1 |
| * r0 (length counter return value)) = 0 |
| * lp_count = maxsize + 1 |
| * */ |
| sub r12, r0, 0x1 |
| mov_s r0, 0 |
| add_s r1, r1, 1 |
| mov lp_count, r1 |
| |
| strlen_loop: |
| z_arc_user_string_nlen_fault_start: |
| /* is the byte at ++r12 a NULL? if so, we're done. Might fault! */ |
| ldb.aw r1, [r12, 1] |
| |
| z_arc_user_string_nlen_fault_end: |
| brne_s r1, 0, not_null |
| |
| strlen_done: |
| /* Success, set err to 0 */ |
| mov_s r1, 0 |
| st_s r1, [sp, 0] |
| |
| z_arc_user_string_nlen_fixup: |
| /* *err_arg = err; Pop stack and return */ |
| ld_s r1, [sp, 0] |
| add_s sp, sp, 4 |
| j_s.d [blink] |
| st_s r1, [r2, 0] |
| |
| not_null: |
| /* check if we've hit the maximum, if so we're done. */ |
| brne.d.nt lp_count, 0x1, inc_len |
| sub lp_count, lp_count, 0x1 |
| b_s strlen_done |
| |
| inc_len: |
| /* increment length measurement, loop again */ |
| add_s r0, r0, 1 |
| b_s strlen_loop |