| # Bluetooth Controller configuration options |
| |
| # Copyright (c) 2016-2017 Nordic Semiconductor ASA |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| comment "BLE Controller support" |
| |
| # The following symbols are enabled depending if the controller actually |
| # supports the respective features. |
| |
| config BT_CTLR_LE_ENC_SUPPORT |
| bool |
| |
| config BT_CTLR_CONN_PARAM_REQ_SUPPORT |
| bool |
| |
| config BT_CTLR_EXT_REJ_IND_SUPPORT |
| bool |
| |
| config BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT |
| bool |
| |
| config BT_CTLR_DATA_LEN_UPDATE_SUPPORT |
| bool |
| |
| config BT_CTLR_PRIVACY_SUPPORT |
| bool |
| |
| config BT_CTLR_EXT_SCAN_FP_SUPPORT |
| bool |
| |
| config BT_CTLR_PHY_UPDATE_SUPPORT |
| bool |
| |
| config BT_CTLR_PHY_2M_SUPPORT |
| bool |
| |
| config BT_CTLR_PHY_CODED_SUPPORT |
| bool |
| |
| config BT_CTLR_ADV_EXT_SUPPORT |
| bool |
| |
| config BT_CTLR_ADV_PERIODIC_SUPPORT |
| depends on BT_CTLR_ADV_EXT_SUPPORT |
| bool |
| |
| config BT_CTLR_SYNC_PERIODIC_SUPPORT |
| depends on BT_CTLR_ADV_EXT_SUPPORT |
| bool |
| |
| config BT_CTLR_ADV_ISO_SUPPORT |
| depends on BT_CTLR_ADV_PERIODIC_SUPPORT |
| bool |
| |
| config BT_CTLR_SYNC_ISO_SUPPORT |
| depends on BT_CTLR_SYNC_PERIODIC_SUPPORT |
| bool |
| |
| config BT_CTLR_CENTRAL_ISO_SUPPORT |
| bool |
| |
| config BT_CTLR_PERIPHERAL_ISO_SUPPORT |
| bool |
| |
| config BT_CTLR_CHAN_SEL_2_SUPPORT |
| bool |
| |
| config BT_CTLR_MIN_USED_CHAN_SUPPORT |
| bool |
| |
| config BT_CTLR_DTM_HCI_SUPPORT |
| bool |
| |
| config BT_CTLR_SMI_SUPPORT |
| bool |
| |
| config BT_CTLR_CONN_RSSI_SUPPORT |
| bool |
| |
| config BT_CTLR_ECDH_SUPPORT |
| bool |
| |
| config BT_CTLR |
| bool "Bluetooth Controller" |
| help |
| Enables support for SoC native controller implementations. |
| |
| if BT_CTLR |
| |
| choice BT_LL_CHOICE |
| prompt "Bluetooth Link Layer Selection" |
| help |
| Select the Bluetooth Link Layer to compile. |
| |
| config BT_LL_SW_SPLIT |
| bool "Software-based BLE Link Layer" |
| select BT_RECV_IS_RX_THREAD |
| select ENTROPY_GENERATOR |
| select NRF_HW_TIMER0_RESERVED |
| select NRF_HW_RTC0_RESERVED |
| help |
| Use Zephyr software BLE Link Layer ULL LLL split implementation. |
| |
| endchoice |
| |
| comment "BLE Controller configuration" |
| |
| config BT_CTLR_CRYPTO |
| bool "Enable crypto functions in Controller" |
| default y |
| select ENTROPY_GENERATOR |
| help |
| Use random number generation and AES encryption support functions |
| provided by the controller. |
| |
| config BT_CTLR_HCI_VS_BUILD_INFO |
| string "Zephyr HCI VS Build Info string" |
| default "" |
| depends on BT_HCI_VS_EXT |
| help |
| User-defined string that will be returned by the Zephyr VS Read Build |
| Information command after the Zephyr version and build time. When |
| setting this to a value different from an empty string, a space |
| character is required at the beginning to separate it from the |
| already included information. |
| |
| config BT_CTLR_AD_DATA_BACKUP |
| bool "Enable Legacy AD Data backup" |
| depends on BT_PERIPHERAL || BT_CTLR_ADV_EXT |
| default y |
| help |
| Backup Legacy Advertising Data when switching to Legacy Directed or |
| to Extended Advertising mode, and restore it when switching back to |
| Legacy Non-Directed Advertising mode. |
| Application can disable this feature if not using Directed |
| Advertising or switch between Legacy and Extended Advertising. |
| |
| config BT_CTLR_HCI_ADV_HANDLE_MAPPING |
| bool "Enable advertising set handle mapping between HCI and LL" |
| depends on BT_CTLR_ADV_EXT |
| default y if BT_HCI_RAW |
| help |
| Enable mapping of advertising set handles between HCI and LL when |
| using external host since it can use arbitrary numbers as set handles |
| (as defined by Core specification) as opposed to LL which always uses |
| zero-based numbering. When using with Zephyr host this option can be |
| disabled to remove extra mapping logic. |
| |
| config BT_CTLR_DUP_FILTER_LEN |
| int "Number of addresses in the scan duplicate filter" |
| depends on BT_OBSERVER |
| default 16 |
| help |
| Set the number of unique BLE addresses that can be filtered as |
| duplicates while scanning. |
| |
| config BT_CTLR_MESH_SCAN_FILTERS |
| int "Number of Mesh scan filters" |
| depends on BT_HCI_MESH_EXT |
| default 1 |
| range 1 15 |
| help |
| Set the number of unique Mesh Scan Filters available as part of |
| the Intel Mesh Vendor Specific Extensions. |
| |
| config BT_CTLR_MESH_SF_PATTERNS |
| int "Number of Mesh scan filter patterns" |
| depends on BT_HCI_MESH_EXT |
| default 15 |
| range 1 15 |
| help |
| Set the number of unique Mesh Scan Filter patterns available per |
| Scan Filter as part of the Intel Mesh Vendor Specific Extensions. |
| |
| config BT_CTLR_RX_BUFFERS |
| int "Number of Rx buffers" |
| default 6 if BT_HCI_RAW |
| default 1 |
| range 1 18 |
| help |
| Set the number of Rx PDUs to be buffered in the controller. In a 7.5ms |
| connection interval and 2M PHY, maximum 18 packets with L2CAP payload |
| size of 1 byte can be received. |
| |
| config BT_CTLR_ISO_TX_BUFFERS |
| int "Number of Isochronous Tx buffers" |
| depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO |
| range 1 19 |
| default 3 |
| help |
| Set the number of Isochronous Tx PDUs to be queued for transmission |
| in the controller. |
| |
| config BT_CTLR_ISO_TX_BUFFER_SIZE |
| int "Isochronous Tx buffer size" |
| depends on BT_CTLR_ADV_ISO || BT_CTLR_CONN_ISO |
| range 1 4095 |
| default 27 |
| help |
| Size of the Isochronous Tx buffers and the value returned in HCI LE |
| Read Buffer Size V2 command response. |
| |
| choice BT_CTLR_TX_PWR |
| prompt "Tx Power" |
| default BT_CTLR_TX_PWR_0 |
| help |
| Select the supported BLE Radio transmit power level in dBm. |
| |
| config BT_CTLR_TX_PWR_PLUS_8 |
| bool "+8 dBm" |
| depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH |
| |
| config BT_CTLR_TX_PWR_PLUS_7 |
| bool "+7 dBm" |
| depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH |
| |
| config BT_CTLR_TX_PWR_PLUS_6 |
| bool "+6 dBm" |
| depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH |
| |
| config BT_CTLR_TX_PWR_PLUS_5 |
| bool "+5 dBm" |
| depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH |
| |
| config BT_CTLR_TX_PWR_PLUS_4 |
| bool "+4 dBm" |
| depends on SOC_SERIES_NRF51X || SOC_COMPATIBLE_NRF52X |
| |
| config BT_CTLR_TX_PWR_PLUS_3 |
| bool "+3 dBm" |
| depends on SOC_COMPATIBLE_NRF52X |
| |
| config BT_CTLR_TX_PWR_PLUS_2 |
| bool "+2 dBm" |
| depends on HAS_HW_NRF_RADIO_TX_PWR_HIGH |
| |
| config BT_CTLR_TX_PWR_0 |
| bool "0 dBm" |
| |
| config BT_CTLR_TX_PWR_MINUS_4 |
| bool "-4 dBm" |
| |
| config BT_CTLR_TX_PWR_MINUS_8 |
| bool "-8 dBm" |
| |
| config BT_CTLR_TX_PWR_MINUS_12 |
| bool "-12 dBm" |
| |
| config BT_CTLR_TX_PWR_MINUS_16 |
| bool "-16 dBm" |
| |
| config BT_CTLR_TX_PWR_MINUS_20 |
| bool "-20 dBm" |
| |
| config BT_CTLR_TX_PWR_MINUS_30 |
| bool "-30 dBm" |
| depends on SOC_SERIES_NRF51X |
| |
| config BT_CTLR_TX_PWR_MINUS_40 |
| bool "-40 dBm" |
| depends on SOC_COMPATIBLE_NRF52X |
| |
| endchoice |
| |
| config BT_CTLR_TX_PWR_DYNAMIC_CONTROL |
| bool "Tx Power Dynamic Control" |
| depends on BT_HCI_VS_EXT |
| help |
| Enable dynamic control of Tx power per role/connection. |
| Provides HCI VS commands to set and get the current Tx |
| power on an individual role/connection basis. |
| |
| comment "BLE Controller features" |
| |
| if BT_CONN |
| |
| config BT_CTLR_LE_ENC |
| bool "LE Encryption" |
| depends on BT_CTLR_LE_ENC_SUPPORT |
| default y |
| help |
| Enable support for Bluetooth v4.0 LE Encryption feature in the |
| Controller. |
| |
| config BT_CTLR_ECDH |
| bool "Elliptic Curve Diffie-Hellman (ECDH)" |
| depends on BT_CTLR_ECDH_SUPPORT |
| default y |
| help |
| Enable support for Bluetoooth v4.2 Elliptic Curve Diffie-Hellman |
| feature in the controller. |
| |
| config BT_CTLR_CONN_PARAM_REQ |
| bool "Connection Parameter Request" |
| depends on BT_CTLR_CONN_PARAM_REQ_SUPPORT |
| select BT_CTLR_EXT_REJ_IND |
| default y |
| help |
| Enable support for Bluetooth v4.1 Connection Parameter Request feature |
| in the Controller. |
| |
| config BT_CTLR_EXT_REJ_IND |
| bool "Extended Reject Indication" |
| depends on BT_CTLR_EXT_REJ_IND_SUPPORT |
| default y |
| help |
| Enable support for Bluetooth v4.1 Extended Reject Indication feature |
| in the Controller. |
| |
| config BT_CTLR_PER_INIT_FEAT_XCHG |
| bool "Peripheral-initiated Features Exchange" |
| depends on BT_CTLR_PER_INIT_FEAT_XCHG_SUPPORT |
| default y |
| help |
| Enable support for Bluetooth v4.1 Peripheral-initiated Features Exchange |
| feature in the Controller. |
| |
| config BT_CTLR_LE_PING |
| bool "LE Ping" |
| depends on BT_CTLR_LE_ENC |
| default y |
| help |
| Enable support for Bluetooth v4.1 LE Ping feature in the Controller. |
| |
| config BT_CTLR_DATA_LENGTH |
| # Hidden option to enable support for Bluetooth v4.2 LE Data Length |
| # Update procedure in the Controller. |
| bool |
| depends on BT_DATA_LEN_UPDATE && BT_CTLR_DATA_LEN_UPDATE_SUPPORT |
| default y |
| |
| config BT_CTLR_DATA_LENGTH_MAX |
| int "Maximum data length supported" |
| depends on BT_CTLR_DATA_LENGTH |
| default 27 |
| range 27 BT_BUF_ACL_RX_SIZE if BT_BUF_ACL_RX_SIZE < 251 |
| range 27 251 |
| help |
| Set the maximum data length of PDU supported in the Controller. |
| |
| config BT_CTLR_PHY |
| # Hidden option to enable support for Bluetooth 5.0 PHY Update |
| # Procedure in the Controller. |
| bool |
| depends on BT_PHY_UPDATE && BT_CTLR_PHY_UPDATE_SUPPORT |
| select BT_CTLR_EXT_REJ_IND |
| default y |
| |
| config BT_CTLR_MIN_USED_CHAN |
| bool "Minimum Number of Used Channels" |
| depends on BT_CTLR_MIN_USED_CHAN_SUPPORT |
| default y |
| help |
| Enable support for Bluetooth 5.0 Minimum Number of Used Channels |
| Procedure in the Controller. |
| |
| config BT_CTLR_CONN_RSSI |
| bool "Connection RSSI" |
| depends on BT_CTLR_CONN_RSSI_SUPPORT |
| default y if BT_HCI_RAW |
| help |
| Enable connection RSSI measurement. |
| |
| config BT_CTLR_CHECK_SAME_PEER_CONN |
| bool |
| default BT_MAX_CONN > 1 && !BT_CTLR_ALLOW_SAME_PEER_CONN |
| |
| endif # BT_CONN |
| |
| config BT_CTLR_FILTER_ACCEPT_LIST |
| bool "Filter Accept List Support" |
| default y |
| help |
| Enable support for controller Filter Accept List feature |
| |
| config BT_CTLR_PRIVACY |
| bool "LE Controller-based Privacy" |
| depends on BT_CTLR_PRIVACY_SUPPORT |
| default y |
| select BT_CTLR_FILTER_ACCEPT_LIST if BT_LL_SW_SPLIT |
| select BT_RPA |
| help |
| Enable support for Bluetooth v4.2 LE Controller-based Privacy feature |
| in the Controller. |
| |
| config BT_CTLR_FAL_SIZE |
| int "LE Controller-based Privacy White List size" |
| depends on BT_CTLR_FILTER_ACCEPT_LIST |
| default 8 |
| range 1 8 if (SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1_RISCV32) |
| range 1 16 if !(SOC_COMPATIBLE_NRF || SOC_OPENISA_RV32M1_RISCV32) |
| help |
| Set the size of the White List for LE Controller-based Privacy. |
| On nRF5x-based controllers, the hardware imposes a limit of 8 devices. |
| On OpenISA-based controllers, the hardware imposes a limit of 8 devices. |
| |
| config BT_CTLR_RL_SIZE |
| int "LE Controller-based Privacy Resolving List size" |
| depends on BT_CTLR_PRIVACY |
| default 8 |
| range 1 8 if SOC_COMPATIBLE_NRF |
| range 1 8 if SOC_OPENISA_RV32M1_RISCV32 |
| help |
| Set the size of the Resolving List for LE Controller-based Privacy. |
| On nRF5x-based controllers, the hardware imposes a limit of 8 devices. |
| On OpenISA-based controllers, the hardware imposes a limit of 8 devices. |
| |
| config BT_CTLR_EXT_SCAN_FP |
| bool "LE Extended Scanner Filter Policies" |
| depends on BT_OBSERVER && BT_CTLR_EXT_SCAN_FP_SUPPORT |
| default y |
| help |
| Enable support for Bluetooth v4.2 LE Extended Scanner Filter Policies |
| in the Controller. |
| |
| config BT_CTLR_PHY_2M |
| bool "2Mbps PHY Support" |
| depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_2M_SUPPORT |
| default y |
| help |
| Enable support for Bluetooth 5.0 2Mbps PHY in the Controller. |
| |
| config BT_CTLR_PHY_CODED |
| bool "Coded PHY Support" |
| depends on (BT_CTLR_PHY || BT_CTLR_ADV_EXT) && BT_CTLR_PHY_CODED_SUPPORT |
| default y if BT_HCI_RAW |
| help |
| Enable support for Bluetooth 5.0 Coded PHY in the Controller. |
| |
| config BT_CTLR_CHAN_SEL_2 |
| bool "Channel Selection Algorithm #2" |
| depends on (BT_CONN || (BT_BROADCASTER && BT_CTLR_ADV_EXT) || BT_CTLR_ADV_PERIODIC || BT_CTLR_SYNC_PERIODIC) && BT_CTLR_CHAN_SEL_2_SUPPORT |
| default y |
| help |
| Enable support for Bluetooth 5.0 LE Channel Selection Algorithm #2 in |
| the Controller. |
| |
| config BT_CTLR_ADV_EXT |
| bool "LE Advertising Extensions" if !BT_LL_SW_SPLIT |
| depends on BT_CTLR_ADV_EXT_SUPPORT |
| select BT_CTLR_SCAN_REQ_NOTIFY if BT_LL_SW_SPLIT && BT_BROADCASTER |
| # Enable by default for BT_LL_SW_SPLIT when "LE Advertising Set Terminated event" is implemented |
| default y if BT_EXT_ADV && !BT_LL_SW_SPLIT |
| help |
| Enable support for Bluetooth 5.0 LE Advertising Extensions in the |
| Controller. |
| |
| config BT_CTLR_ADV_EXT |
| prompt "LE Advertising Extensions [EXPERIMENTAL]" if BT_LL_SW_SPLIT |
| |
| if BT_CTLR_ADV_EXT |
| |
| config BT_CTLR_ADV_SET |
| int "LE Advertising Extensions Sets" |
| depends on BT_BROADCASTER |
| range 1 64 |
| default BT_EXT_ADV_MAX_ADV_SET if BT_EXT_ADV |
| help |
| Maximum supported advertising sets. |
| |
| config BT_CTLR_ADV_DATA_LEN_MAX |
| int "Maximum Advertising Data Length" |
| range 31 1650 |
| help |
| Maximum Extended Advertising Data Length. |
| |
| config BT_CTLR_ADV_EXT_RX_PDU_LEN_MAX |
| int "Maximum Advertising Extensions Receive PDU Length" |
| range 255 255 if BT_HCI_RAW |
| range 31 255 |
| default 255 |
| help |
| Maximum Advertising Extensions Receive PDU Length. |
| |
| config BT_CTLR_ADV_PERIODIC |
| bool "LE Periodic Advertising in Advertising State" if !BT_LL_SW_SPLIT |
| depends on BT_BROADCASTER && BT_CTLR_ADV_PERIODIC_SUPPORT |
| select BT_CTLR_CHAN_SEL_2 |
| default y if BT_PER_ADV |
| help |
| Enable support for Bluetooth 5.0 LE Periodic Advertising in the |
| Controller. |
| |
| config BT_CTLR_ADV_PERIODIC |
| bool "LE Periodic Advertising in Advertising State [EXPERIMENTAL]" if BT_LL_SW_SPLIT |
| |
| config BT_CTLR_SYNC_PERIODIC |
| bool "LE Periodic Advertising in Synchronization State" if !BT_LL_SW_SPLIT |
| depends on BT_OBSERVER && BT_CTLR_SYNC_PERIODIC_SUPPORT |
| select BT_CTLR_CHAN_SEL_2 |
| default y if BT_PER_ADV_SYNC |
| help |
| Enable support for Bluetooth 5.0 LE Periodic Advertising in |
| Synchronization state in the Controller. |
| |
| config BT_CTLR_SYNC_PERIODIC |
| bool "LE Periodic Advertising in Synchronization State [EXPERIMENTAL]" if BT_LL_SW_SPLIT |
| |
| config BT_CTLR_SYNC_PERIODIC_CTE_TYPE_FILTERING |
| bool "LE Periodic Advertiser filtering by CTE type" |
| depends on BT_CTLR_SYNC_PERIODIC |
| default y |
| help |
| Enable filtering of periodic advertisements depending on type of |
| Constant Tone Extension. |
| |
| config BT_CTLR_ADV_ISO |
| bool "LE Broadcast Isochronous Channel advertising" if !BT_LL_SW_SPLIT |
| depends on BT_BROADCASTER && BT_CTLR_ADV_ISO_SUPPORT |
| select BT_CTLR_ADV_PERIODIC |
| select BT_CTLR_SET_HOST_FEATURE |
| help |
| Enable support for Bluetooth 5.2 LE Isochronous Advertising in the |
| Controller. |
| |
| config BT_CTLR_ADV_ISO |
| bool "LE Broadcast Isochronous Channel advertising [EXPERIMENTAL]" if BT_LL_SW_SPLIT |
| |
| config BT_CTLR_SYNC_ISO |
| bool "LE Broadcast Isochronous Channel advertising sync" if !BT_LL_SW_SPLIT |
| depends on BT_OBSERVER && BT_CTLR_SYNC_ISO_SUPPORT |
| select BT_CTLR_SYNC_PERIODIC |
| select BT_CTLR_SET_HOST_FEATURE |
| help |
| Enable support for Bluetooth 5.2 LE Isochronous Advertising sync in |
| the Controller. |
| |
| config BT_CTLR_SYNC_ISO |
| bool "LE Broadcast Isochronous Channel advertising sync [EXPERIMENTAL]" if BT_LL_SW_SPLIT |
| |
| config BT_CTLR_BROADCAST_ISO |
| bool |
| default BT_CTLR_ADV_ISO || BT_CTLR_SYNC_ISO |
| |
| config BT_CTLR_ADV_ISO_SET |
| int "LE Isochronous Channel advertising sets" |
| depends on BT_CTLR_ADV_ISO |
| range 1 32 |
| default 1 |
| help |
| Maximum supported advertising sets. |
| |
| config BT_CTLR_ADV_ISO_PDU_LEN_MAX |
| int "Maximum Broadcast Isochronous Channel PDU Length" |
| depends on BT_CTLR_ADV_ISO |
| range 27 251 |
| default 251 |
| help |
| Maximum Broadcast Isochronous Channel PDU Length. |
| |
| config BT_CTLR_SYNC_ISO_PDU_LEN_MAX |
| int "Maximum Synchronized Isochronous Channel PDU Length" |
| depends on BT_CTLR_SYNC_ISO |
| range 251 251 if BT_HCI_RAW |
| range 27 251 |
| default 251 |
| help |
| Maximum Synchronized Receiver Isochronous Channel PDU Length. |
| |
| endif # BT_CTLR_ADV_EXT |
| |
| config BT_CTLR_SET_HOST_FEATURE |
| bool "LE Set Host Feature Command [EXPERIMENTAL]" |
| help |
| Enables optional LE Set Host Feature Command |
| |
| config BT_CTLR_CENTRAL_ISO |
| bool "LE Connected Isochronous Stream Central" if !BT_LL_SW_SPLIT |
| depends on BT_CTLR_CENTRAL_ISO_SUPPORT && BT_CENTRAL |
| help |
| Enable support for Bluetooth 5.2 LE Connected Isochronous Stream |
| Central role in the Controller. |
| |
| config BT_CTLR_CENTRAL_ISO |
| bool "LE Connected Isochronous Stream Central [EXPERIMENTAL]" if BT_LL_SW_SPLIT |
| select BT_CTLR_SET_HOST_FEATURE |
| |
| config BT_CTLR_PERIPHERAL_ISO |
| bool "LE Connected Isochronous Stream Peripheral" if !BT_LL_SW_SPLIT |
| depends on BT_CTLR_PERIPHERAL_ISO_SUPPORT && BT_PERIPHERAL |
| help |
| Enable support for Bluetooth 5.2 LE Connected Isochronous Stream |
| Peripheral role in the Controller. |
| |
| config BT_CTLR_PERIPHERAL_ISO |
| bool "LE Connected Isochronous Stream Peripheral [EXPERIMENTAL]" if BT_LL_SW_SPLIT |
| select BT_CTLR_SET_HOST_FEATURE |
| |
| config BT_CTLR_CONN_ISO |
| bool |
| default BT_CTLR_CENTRAL_ISO || BT_CTLR_PERIPHERAL_ISO |
| |
| config BT_CTLR_CONN_ISO_STREAMS |
| int "LE Connected Isochronous Streams" |
| depends on BT_CTLR_CONN_ISO |
| range 1 64 |
| default 2 |
| help |
| Maximum supported total number of CISes. |
| |
| config BT_CTLR_CONN_ISO_GROUPS |
| int "LE Connected Isochronous Groups" |
| depends on BT_CTLR_CONN_ISO |
| range 1 240 |
| default 1 |
| help |
| Maximum supported CIGs. |
| |
| config BT_CTLR_CONN_ISO_STREAMS_PER_GROUP |
| int "LE Connected Isochronous Streams per Group" |
| depends on BT_CTLR_CONN_ISO |
| range 1 31 |
| default 2 |
| help |
| Maximum supported CISes per CIG. |
| |
| config BT_CTLR_ISO |
| bool |
| default BT_CTLR_BROADCAST_ISO || BT_CTLR_CONN_ISO |
| |
| config BT_CTLR_DTM |
| bool |
| help |
| Enable support for Direct Test Mode in the Controller. |
| |
| config BT_CTLR_DTM_HCI |
| bool "Direct Test Mode over HCI" |
| depends on BT_CTLR_DTM_HCI_SUPPORT |
| select BT_CTLR_DTM |
| help |
| Enable support for Direct Test Mode over the HCI transport. |
| |
| config BT_CTLR_SMI_RX |
| bool "Stable modulation index - Receiver" |
| depends on BT_CTLR_SMI_SUPPORT |
| help |
| Enable support for Bluetooth 5.0 SMI RX in the Controller. |
| |
| config BT_CTLR_SMI_TX |
| bool "Stable modulation index - Transmitter" |
| depends on BT_CTLR_SMI_SUPPORT |
| help |
| Enable support for Bluetooth 5.0 SMI TX in the Controller. |
| |
| config BT_CTLR_SMI_TX_SETTING |
| bool "Stable modulation index - Transmitter as setting" |
| depends on BT_CTLR_SMI_TX && BT_CTLR_SETTINGS |
| help |
| Enable support for Bluetooth 5.0 SMI TX through a system setting. |
| |
| config BT_CTLR_HCI_CODEC_AND_DELAY_INFO |
| bool "Codecs and controller delay information commands" |
| help |
| Enable HCI commands to read information about supported |
| codecs, codec capabilities, and controller delay. |
| |
| rsource "Kconfig.df" |
| rsource "Kconfig.ll_sw_split" |
| |
| config BT_CTLR_ASSERT_HANDLER |
| bool "Application Defined Assertion Handler" |
| help |
| This option enables an application-defined sink for the |
| controller assertion mechanism. This must be defined in |
| application code as void \"bt_ctlr_assert_handle(char \*, int)\" |
| and will be invoked whenever the controller code encounters |
| an unrecoverable error. |
| |
| config BT_CTLR_TEST |
| bool "Run in-system unit tests" |
| help |
| Run in-system unit tests |
| |
| endif # BT_CTLR |
| |
| config BT_CTLR_DEBUG_PINS_CPUAPP |
| bool "Bluetooth Controller Debug Pins" |
| depends on BOARD_NRF5340DK_NRF5340_CPUAPP |
| help |
| Route debug GPIO toggling for the BLE Controller. Enable this when |
| using Bluetooth Controller Debug Pins in co-processor and the main |
| processor needs to setup and/or route the signals. |
