| .. _semtech_sx1262mb2das: |
| |
| Semtech SX1262MB2DAS LoRa Shield |
| ################################ |
| |
| Overview |
| ******** |
| |
| The Semtech SX1262MB2DAS LoRa shield is an Arduino |
| compatible shield based on the SX1262 LoRa transceiver |
| from Semtech. |
| |
| More information about the shield can be found |
| at the `mbed SX1262MB2xAS website`_. |
| |
| Pins Assignment of the Semtech SX1262MB2DAS LoRa Shield |
| ======================================================= |
| |
| +-----------------------+-----------------+ |
| | Shield Connector Pin | Function | |
| +=======================+=================+ |
| | A0 | SX1262 RESET | |
| +-----------------------+-----------------+ |
| | D3 | SX1262 BUSY | |
| +-----------------------+-----------------+ |
| | D5 | SX1262 DIO1 | |
| +-----------------------+-----------------+ |
| | D7 | SX1262 SPI NSS | |
| +-----------------------+-----------------+ |
| | D8 | SX1262 ANT SW | |
| +-----------------------+-----------------+ |
| | D11 | SX1262 SPI MOSI | |
| +-----------------------+-----------------+ |
| | D12 | SX1262 SPI MISO | |
| +-----------------------+-----------------+ |
| | D13 | SX1262 SPI SCK | |
| +-----------------------+-----------------+ |
| |
| The SX1262 signals DIO2 and DIO3 are not available at the shield connector. |
| |
| Requirements |
| ************ |
| |
| This shield can only be used with a board which provides a configuration |
| for Arduino connectors (see :ref:`shields` for more details). |
| |
| Programming |
| *********** |
| |
| Set ``-DSHIELD=semtech_sx1262mb2das`` when you invoke ``west build``. For |
| example: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/subsys/lorawan/class_a |
| :board: nucleo_f429zi |
| :shield: semtech_sx1262mb2das |
| :goals: build |
| |
| References |
| ********** |
| |
| .. target-notes:: |
| |
| .. _mbed SX1262MB2xAS website: |
| https://os.mbed.com/components/SX126xMB2xAS/ |