| # Ethernet drivers configuration options |
| |
| # Copyright (c) 2015 Intel Corporation |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| menuconfig ETH_DRIVER |
| bool "Ethernet drivers" |
| depends on NETWORKING |
| depends on !NET_TEST |
| default y if NET_L2_ETHERNET |
| |
| if ETH_DRIVER |
| |
| config ETH_DRIVER_RAW_MODE |
| bool "Ethernet driver without the MAC stack" |
| select NET_RAW_MODE |
| depends on !NET_L2_ETHERNET |
| help |
| This option enables using the drivers in a so-called "raw" mode, |
| i.e. without a MAC stack (the net L2 layer for ethernet will not |
| be built). |
| |
| module = ETHERNET |
| module-dep = LOG |
| module-str = Log level for Ethernet driver |
| module-help = Sets log level for Ethernet Device Drivers. |
| source "subsys/net/Kconfig.template.log_config.net" |
| |
| config ETH_QEMU_IFACE_NAME |
| string "Network interface name for QEMU" |
| default "zeth" |
| depends on NET_QEMU_ETHERNET |
| help |
| The network interface name for QEMU. This value is given as |
| a parameter to -nic qemu command line option. The network |
| interface must be created before starting QEMU. The net-setup.sh |
| script from net-tools project can be used to create the network |
| interface. |
| |
| config ETH_QEMU_EXTRA_ARGS |
| string "Extra arguments to QEMU -nic option" |
| depends on NET_QEMU_ETHERNET |
| default "" |
| help |
| Extra arguments passed to QEMU -nic option when Ethernet Networking |
| is enabled. Typically this is used to set the network MAC address of |
| Zephyr instance. This option can contain multiple QEMU option |
| arguments. Each QEMU argument must be separated by comma "," and no |
| spaces between arguments. Example: "mac=02:03:04:f0:0d:01" or |
| "mac=02:03:04:f0:0d:01,downscript=no" |
| |
| source "drivers/ethernet/Kconfig.enc28j60" |
| source "drivers/ethernet/Kconfig.enc424j600" |
| source "drivers/ethernet/Kconfig.esp32" |
| source "drivers/ethernet/Kconfig.e1000" |
| source "drivers/ethernet/Kconfig.sam_gmac" |
| source "drivers/ethernet/Kconfig.stm32_hal" |
| source "drivers/ethernet/Kconfig.dwmac" |
| source "drivers/ethernet/Kconfig.smsc911x" |
| source "drivers/ethernet/Kconfig.native_posix" |
| source "drivers/ethernet/Kconfig.stellaris" |
| source "drivers/ethernet/Kconfig.liteeth" |
| source "drivers/ethernet/Kconfig.gecko" |
| source "drivers/ethernet/Kconfig.w5500" |
| source "drivers/ethernet/Kconfig.dsa" |
| source "drivers/ethernet/Kconfig.xlnx_gem" |
| source "drivers/ethernet/Kconfig.cyclonev" |
| source "drivers/ethernet/Kconfig.nxp_s32_netc" |
| source "drivers/ethernet/Kconfig.nxp_s32_gmac" |
| source "drivers/ethernet/Kconfig.smsc91x" |
| source "drivers/ethernet/Kconfig.ivshmem" |
| source "drivers/ethernet/Kconfig.adin2111" |
| source "drivers/ethernet/Kconfig.numaker" |
| source "drivers/ethernet/Kconfig.lan865x" |
| source "drivers/ethernet/Kconfig.xmc4xxx" |
| |
| source "drivers/ethernet/eth_nxp_enet_qos/Kconfig" |
| |
| source "drivers/ethernet/phy/Kconfig" |
| |
| source "drivers/ethernet/nxp_enet/Kconfig" |
| |
| endif # "Ethernet Drivers" |
| |
| config ETH_INIT_PRIORITY |
| int "Ethernet driver init priority" |
| default 80 |
| depends on NET_L2_ETHERNET || ETH_DRIVER |
| help |
| Ethernet device driver initialization priority. |
| Do not mess with it unless you know what you are doing. |
| Note that the priority needs to be lower than the net stack |
| so that it can start before the networking sub-system. |
