| /* |
| * Copyright (c) 2017 comsuisse AG |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #define DT_DRV_COMPAT atmel_sam_xdmac |
| |
| /** @file |
| * @brief Atmel SAM MCU family Direct Memory Access (XDMAC) driver. |
| */ |
| |
| #include <errno.h> |
| #include <zephyr/sys/__assert.h> |
| #include <zephyr/device.h> |
| #include <zephyr/init.h> |
| #include <string.h> |
| #include <soc.h> |
| #include <zephyr/drivers/dma.h> |
| #include <zephyr/drivers/clock_control/atmel_sam_pmc.h> |
| #include "dma_sam_xdmac.h" |
| |
| #define LOG_LEVEL CONFIG_DMA_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| #include <zephyr/irq.h> |
| LOG_MODULE_REGISTER(dma_sam_xdmac); |
| |
| #define XDMAC_INT_ERR (XDMAC_CIE_RBIE | XDMAC_CIE_WBIE | XDMAC_CIE_ROIE) |
| #define DMA_CHANNELS_NO XDMACCHID_NUMBER |
| |
| /* DMA channel configuration */ |
| struct sam_xdmac_channel_cfg { |
| void *user_data; |
| dma_callback_t callback; |
| uint32_t data_size; |
| }; |
| |
| /* Device constant configuration parameters */ |
| struct sam_xdmac_dev_cfg { |
| Xdmac *regs; |
| void (*irq_config)(void); |
| const struct atmel_sam_pmc_config clock_cfg; |
| uint8_t irq_id; |
| }; |
| |
| /* Device run time data */ |
| struct sam_xdmac_dev_data { |
| struct sam_xdmac_channel_cfg dma_channels[DMA_CHANNELS_NO]; |
| }; |
| |
| static void sam_xdmac_isr(const struct device *dev) |
| { |
| const struct sam_xdmac_dev_cfg *const dev_cfg = dev->config; |
| struct sam_xdmac_dev_data *const dev_data = dev->data; |
| |
| Xdmac * const xdmac = dev_cfg->regs; |
| struct sam_xdmac_channel_cfg *channel_cfg; |
| uint32_t isr_status; |
| uint32_t err; |
| |
| /* Get global interrupt status */ |
| isr_status = xdmac->XDMAC_GIS; |
| |
| for (int channel = 0; channel < DMA_CHANNELS_NO; channel++) { |
| if (!(isr_status & (1 << channel))) { |
| continue; |
| } |
| |
| channel_cfg = &dev_data->dma_channels[channel]; |
| |
| /* Get channel errors */ |
| err = xdmac->XDMAC_CHID[channel].XDMAC_CIS & XDMAC_INT_ERR; |
| |
| /* Execute callback */ |
| if (channel_cfg->callback) { |
| channel_cfg->callback(dev, channel_cfg->user_data, |
| channel, err); |
| } |
| } |
| } |
| |
| int sam_xdmac_channel_configure(const struct device *dev, uint32_t channel, |
| struct sam_xdmac_channel_config *param) |
| { |
| const struct sam_xdmac_dev_cfg *const dev_cfg = dev->config; |
| |
| Xdmac * const xdmac = dev_cfg->regs; |
| |
| if (channel >= DMA_CHANNELS_NO) { |
| return -EINVAL; |
| } |
| |
| /* Check if the channel is enabled */ |
| if (xdmac->XDMAC_GS & (XDMAC_GS_ST0 << channel)) { |
| return -EBUSY; |
| } |
| |
| /* Disable all channel interrupts */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CID = 0xFF; |
| /* Clear pending Interrupt Status bit(s) */ |
| (void)xdmac->XDMAC_CHID[channel].XDMAC_CIS; |
| |
| /* NOTE: |
| * Setting channel configuration is not required for linked list view 2 |
| * to 3 modes. It is done anyway to keep the code simple. It has no |
| * negative impact on the DMA functionality. |
| */ |
| |
| /* Set channel configuration */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CC = param->cfg; |
| |
| /* Set data stride memory pattern */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CDS_MSP = param->ds_msp; |
| /* Set source microblock stride */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CSUS = param->sus; |
| /* Set destination microblock stride */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CDUS = param->dus; |
| |
| /* Enable selected channel interrupts */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CIE = param->cie; |
| |
| return 0; |
| } |
| |
| int sam_xdmac_transfer_configure(const struct device *dev, uint32_t channel, |
| struct sam_xdmac_transfer_config *param) |
| { |
| const struct sam_xdmac_dev_cfg *const dev_cfg = dev->config; |
| |
| Xdmac * const xdmac = dev_cfg->regs; |
| |
| if (channel >= DMA_CHANNELS_NO) { |
| return -EINVAL; |
| } |
| |
| /* Check if the channel is enabled */ |
| if (xdmac->XDMAC_GS & (XDMAC_GS_ST0 << channel)) { |
| return -EBUSY; |
| } |
| |
| /* NOTE: |
| * Setting source, destination address is not required for linked list |
| * view 1 to 3 modes. It is done anyway to keep the code simple. It has |
| * no negative impact on the DMA functionality. |
| */ |
| |
| /* Set source address */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CSA = param->sa; |
| /* Set destination address */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CDA = param->da; |
| |
| if ((param->ndc & XDMAC_CNDC_NDE) == XDMAC_CNDC_NDE_DSCR_FETCH_DIS) { |
| /* |
| * Linked List is disabled, configure additional transfer |
| * parameters. |
| */ |
| |
| /* Set length of data in the microblock */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CUBC = param->ublen; |
| /* Set block length: block length is (blen+1) microblocks */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CBC = param->blen; |
| } else { |
| /* |
| * Linked List is enabled, configure additional transfer |
| * parameters. |
| */ |
| |
| /* Set next descriptor address */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CNDA = param->nda; |
| } |
| |
| /* Set next descriptor configuration */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CNDC = param->ndc; |
| |
| return 0; |
| } |
| |
| static int sam_xdmac_config(const struct device *dev, uint32_t channel, |
| struct dma_config *cfg) |
| { |
| struct sam_xdmac_dev_data *const dev_data = dev->data; |
| struct sam_xdmac_channel_config channel_cfg; |
| struct sam_xdmac_transfer_config transfer_cfg; |
| uint32_t burst_size; |
| uint32_t data_size; |
| int ret; |
| |
| if (channel >= DMA_CHANNELS_NO) { |
| return -EINVAL; |
| } |
| |
| __ASSERT_NO_MSG(cfg->source_data_size == cfg->dest_data_size); |
| __ASSERT_NO_MSG(cfg->source_burst_length == cfg->dest_burst_length); |
| |
| if (cfg->source_data_size != 1U && cfg->source_data_size != 2U && |
| cfg->source_data_size != 4U) { |
| LOG_ERR("Invalid 'source_data_size' value"); |
| return -EINVAL; |
| } |
| |
| if (cfg->block_count != 1U) { |
| LOG_ERR("Only single block transfer is currently supported." |
| " Please submit a patch."); |
| return -EINVAL; |
| } |
| |
| burst_size = find_msb_set(cfg->source_burst_length) - 1; |
| LOG_DBG("burst_size=%d", burst_size); |
| data_size = find_msb_set(cfg->source_data_size) - 1; |
| dev_data->dma_channels[channel].data_size = data_size; |
| LOG_DBG("data_size=%d", data_size); |
| |
| uint32_t xdmac_inc_cfg = 0; |
| |
| if (cfg->head_block->source_addr_adj == DMA_ADDR_ADJ_INCREMENT |
| && cfg->channel_direction == MEMORY_TO_PERIPHERAL) { |
| xdmac_inc_cfg |= XDMAC_CC_SAM_INCREMENTED_AM; |
| } else { |
| xdmac_inc_cfg |= XDMAC_CC_SAM_FIXED_AM; |
| } |
| |
| if (cfg->head_block->dest_addr_adj == DMA_ADDR_ADJ_INCREMENT |
| && cfg->channel_direction == PERIPHERAL_TO_MEMORY) { |
| xdmac_inc_cfg |= XDMAC_CC_DAM_INCREMENTED_AM; |
| } else { |
| xdmac_inc_cfg |= XDMAC_CC_DAM_FIXED_AM; |
| } |
| |
| switch (cfg->channel_direction) { |
| case MEMORY_TO_MEMORY: |
| channel_cfg.cfg = |
| XDMAC_CC_TYPE_MEM_TRAN |
| | XDMAC_CC_MBSIZE(burst_size == 0U ? 0 : burst_size - 1) |
| | XDMAC_CC_SAM_INCREMENTED_AM |
| | XDMAC_CC_DAM_INCREMENTED_AM; |
| break; |
| case MEMORY_TO_PERIPHERAL: |
| channel_cfg.cfg = |
| XDMAC_CC_TYPE_PER_TRAN |
| | XDMAC_CC_CSIZE(burst_size) |
| | XDMAC_CC_DSYNC_MEM2PER |
| | xdmac_inc_cfg; |
| break; |
| case PERIPHERAL_TO_MEMORY: |
| channel_cfg.cfg = |
| XDMAC_CC_TYPE_PER_TRAN |
| | XDMAC_CC_CSIZE(burst_size) |
| | XDMAC_CC_DSYNC_PER2MEM |
| | xdmac_inc_cfg; |
| break; |
| default: |
| LOG_ERR("'channel_direction' value %d is not supported", |
| cfg->channel_direction); |
| return -EINVAL; |
| } |
| |
| channel_cfg.cfg |= |
| XDMAC_CC_DWIDTH(data_size) |
| | XDMAC_CC_SIF_AHB_IF1 |
| | XDMAC_CC_DIF_AHB_IF1 |
| | XDMAC_CC_PERID(cfg->dma_slot); |
| channel_cfg.ds_msp = 0U; |
| channel_cfg.sus = 0U; |
| channel_cfg.dus = 0U; |
| channel_cfg.cie = |
| (cfg->complete_callback_en ? XDMAC_CIE_BIE : XDMAC_CIE_LIE) |
| | (cfg->error_callback_dis ? 0 : XDMAC_INT_ERR); |
| |
| ret = sam_xdmac_channel_configure(dev, channel, &channel_cfg); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| dev_data->dma_channels[channel].callback = cfg->dma_callback; |
| dev_data->dma_channels[channel].user_data = cfg->user_data; |
| |
| (void)memset(&transfer_cfg, 0, sizeof(transfer_cfg)); |
| transfer_cfg.sa = cfg->head_block->source_address; |
| transfer_cfg.da = cfg->head_block->dest_address; |
| transfer_cfg.ublen = cfg->head_block->block_size >> data_size; |
| |
| ret = sam_xdmac_transfer_configure(dev, channel, &transfer_cfg); |
| |
| return ret; |
| } |
| |
| static int sam_xdmac_transfer_reload(const struct device *dev, uint32_t channel, |
| uint32_t src, uint32_t dst, size_t size) |
| { |
| struct sam_xdmac_dev_data *const dev_data = dev->data; |
| struct sam_xdmac_transfer_config transfer_cfg = { |
| .sa = src, |
| .da = dst, |
| .ublen = size >> dev_data->dma_channels[channel].data_size, |
| }; |
| |
| return sam_xdmac_transfer_configure(dev, channel, &transfer_cfg); |
| } |
| |
| int sam_xdmac_transfer_start(const struct device *dev, uint32_t channel) |
| { |
| const struct sam_xdmac_dev_cfg *config = dev->config; |
| |
| Xdmac * const xdmac = config->regs; |
| |
| if (channel >= DMA_CHANNELS_NO) { |
| LOG_DBG("Channel %d out of range", channel); |
| return -EINVAL; |
| } |
| |
| /* Check if the channel is enabled */ |
| if (xdmac->XDMAC_GS & (XDMAC_GS_ST0 << channel)) { |
| LOG_DBG("Channel %d already enabled", channel); |
| return -EBUSY; |
| } |
| |
| /* Enable channel interrupt */ |
| xdmac->XDMAC_GIE = XDMAC_GIE_IE0 << channel; |
| /* Enable channel */ |
| xdmac->XDMAC_GE = XDMAC_GE_EN0 << channel; |
| |
| return 0; |
| } |
| |
| int sam_xdmac_transfer_stop(const struct device *dev, uint32_t channel) |
| { |
| const struct sam_xdmac_dev_cfg *config = dev->config; |
| |
| Xdmac * const xdmac = config->regs; |
| |
| if (channel >= DMA_CHANNELS_NO) { |
| return -EINVAL; |
| } |
| |
| /* Check if the channel is enabled */ |
| if (!(xdmac->XDMAC_GS & (XDMAC_GS_ST0 << channel))) { |
| return 0; |
| } |
| |
| /* Disable channel */ |
| xdmac->XDMAC_GD = XDMAC_GD_DI0 << channel; |
| /* Disable channel interrupt */ |
| xdmac->XDMAC_GID = XDMAC_GID_ID0 << channel; |
| /* Disable all channel interrupts */ |
| xdmac->XDMAC_CHID[channel].XDMAC_CID = 0xFF; |
| /* Clear the pending Interrupt Status bit(s) */ |
| (void)xdmac->XDMAC_CHID[channel].XDMAC_CIS; |
| |
| return 0; |
| } |
| |
| static int sam_xdmac_initialize(const struct device *dev) |
| { |
| const struct sam_xdmac_dev_cfg *const dev_cfg = dev->config; |
| |
| Xdmac * const xdmac = dev_cfg->regs; |
| |
| /* Configure interrupts */ |
| dev_cfg->irq_config(); |
| |
| /* Enable XDMAC clock in PMC */ |
| (void)clock_control_on(SAM_DT_PMC_CONTROLLER, |
| (clock_control_subsys_t)&dev_cfg->clock_cfg); |
| |
| /* Disable all channels */ |
| xdmac->XDMAC_GD = UINT32_MAX; |
| /* Disable all channel interrupts */ |
| xdmac->XDMAC_GID = UINT32_MAX; |
| |
| /* Enable module's IRQ */ |
| irq_enable(dev_cfg->irq_id); |
| |
| LOG_INF("Device %s initialized", dev->name); |
| |
| return 0; |
| } |
| |
| static int sam_xdmac_get_status(const struct device *dev, uint32_t channel, |
| struct dma_status *status) |
| { |
| const struct sam_xdmac_dev_cfg *const dev_cfg = dev->config; |
| |
| Xdmac * const xdmac = dev_cfg->regs; |
| uint32_t chan_cfg = xdmac->XDMAC_CHID[channel].XDMAC_CC; |
| uint32_t ublen = xdmac->XDMAC_CHID[channel].XDMAC_CUBC; |
| |
| /* we need to check some of the XDMAC_CC registers to determine the DMA direction */ |
| if ((chan_cfg & XDMAC_CC_TYPE_Msk) == 0) { |
| status->dir = MEMORY_TO_MEMORY; |
| } else if ((chan_cfg & XDMAC_CC_DSYNC_Msk) == XDMAC_CC_DSYNC_MEM2PER) { |
| status->dir = MEMORY_TO_PERIPHERAL; |
| } else { |
| status->dir = PERIPHERAL_TO_MEMORY; |
| } |
| |
| status->busy = ((chan_cfg & XDMAC_CC_INITD_Msk) != 0) || (ublen > 0); |
| status->pending_length = ublen; |
| |
| return 0; |
| } |
| |
| static const struct dma_driver_api sam_xdmac_driver_api = { |
| .config = sam_xdmac_config, |
| .reload = sam_xdmac_transfer_reload, |
| .start = sam_xdmac_transfer_start, |
| .stop = sam_xdmac_transfer_stop, |
| .get_status = sam_xdmac_get_status, |
| }; |
| |
| /* DMA0 */ |
| |
| static void dma0_sam_irq_config(void) |
| { |
| IRQ_CONNECT(DT_INST_IRQN(0), DT_INST_IRQ(0, priority), sam_xdmac_isr, |
| DEVICE_DT_INST_GET(0), 0); |
| } |
| |
| static const struct sam_xdmac_dev_cfg dma0_sam_config = { |
| .regs = (Xdmac *)DT_INST_REG_ADDR(0), |
| .irq_config = dma0_sam_irq_config, |
| .clock_cfg = SAM_DT_INST_CLOCK_PMC_CFG(0), |
| .irq_id = DT_INST_IRQN(0), |
| }; |
| |
| static struct sam_xdmac_dev_data dma0_sam_data; |
| |
| DEVICE_DT_INST_DEFINE(0, &sam_xdmac_initialize, NULL, |
| &dma0_sam_data, &dma0_sam_config, POST_KERNEL, |
| CONFIG_DMA_INIT_PRIORITY, &sam_xdmac_driver_api); |