| /* |
| * Copyright (c) 2017 I-SENSE group of ICCS |
| * Copyright (c) 2019 Centaur Analytics, Inc |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <arm/armv7-m.dtsi> |
| #include <zephyr/dt-bindings/clock/stm32f3_clock.h> |
| #include <zephyr/dt-bindings/i2c/i2c.h> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| #include <zephyr/dt-bindings/pwm/pwm.h> |
| #include <zephyr/dt-bindings/pwm/stm32_pwm.h> |
| #include <zephyr/dt-bindings/dma/stm32_dma.h> |
| #include <zephyr/dt-bindings/reset/stm32f0_1_3_reset.h> |
| #include <zephyr/dt-bindings/adc/adc.h> |
| #include <freq.h> |
| |
| / { |
| chosen { |
| zephyr,flash-controller = &flash; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m4f"; |
| reg = <0>; |
| }; |
| }; |
| |
| sram0: memory@20000000 { |
| compatible = "mmio-sram"; |
| }; |
| |
| |
| clocks { |
| clk_hse: clk-hse { |
| #clock-cells = <0>; |
| compatible = "st,stm32-hse-clock"; |
| status = "disabled"; |
| }; |
| |
| clk_hsi: clk-hsi { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <DT_FREQ_M(8)>; |
| status = "disabled"; |
| }; |
| |
| clk_lse: clk-lse { |
| #clock-cells = <0>; |
| compatible = "st,stm32-lse-clock"; |
| clock-frequency = <32768>; |
| driving-capability = <0>; |
| status = "disabled"; |
| }; |
| |
| clk_lsi: clk-lsi { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <DT_FREQ_K(40)>; |
| status = "disabled"; |
| }; |
| |
| pll: pll { |
| #clock-cells = <0>; |
| compatible = "st,stm32f0-pll-clock"; |
| status = "disabled"; |
| }; |
| }; |
| |
| soc { |
| flash: flash-controller@40022000 { |
| compatible = "st,stm32-flash-controller", "st,stm32f1-flash-controller"; |
| reg = <0x40022000 0x400>; |
| interrupts = <4 0>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000010>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| flash0: flash@8000000 { |
| compatible = "st,stm32-nv-flash", "soc-nv-flash"; |
| |
| write-block-size = <2>; |
| erase-block-size = <2048>; |
| /* maximum erase time for a 2K sector */ |
| max-erase-time = <40>; |
| }; |
| }; |
| |
| rcc: rcc@40021000 { |
| compatible = "st,stm32f3-rcc"; |
| #clock-cells = <2>; |
| reg = <0x40021000 0x400>; |
| |
| rctl: reset-controller { |
| compatible = "st,stm32-rcc-rctl"; |
| #reset-cells = <1>; |
| }; |
| }; |
| |
| exti: interrupt-controller@40010400 { |
| compatible = "st,stm32-exti"; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| #address-cells = <1>; |
| reg = <0x40010400 0x400>; |
| num-lines = <16>; |
| interrupts = <6 0>, <7 0>, <8 0>, <9 0>, |
| <10 0>, <23 0>, <40 0>; |
| interrupt-names = "line0", "line1", "line2", "line3", |
| "line4", "line5-9", "line10-15"; |
| line-ranges = <0 1>, <1 1>, <2 1>, <3 1>, |
| <4 1>, <5 5>, <10 6>; |
| }; |
| |
| pinctrl: pin-controller@48000000 { |
| compatible = "st,stm32-pinctrl"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x48000000 0x1800>; |
| |
| gpioa: gpio@48000000 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48000000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00020000>; |
| }; |
| |
| gpiob: gpio@48000400 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48000400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00040000>; |
| }; |
| |
| gpioc: gpio@48000800 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48000800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00080000>; |
| }; |
| |
| gpiod: gpio@48000c00 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48000c00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00100000>; |
| }; |
| |
| gpiof: gpio@48001400 { |
| compatible = "st,stm32-gpio"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| reg = <0x48001400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00400000>; |
| }; |
| }; |
| |
| iwdg: watchdog@40003000 { |
| compatible = "st,stm32-watchdog"; |
| reg = <0x40003000 0x400>; |
| status = "disabled"; |
| }; |
| |
| wwdg: watchdog@40002c00 { |
| compatible = "st,stm32-window-watchdog"; |
| reg = <0x40002C00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000800>; |
| interrupts = <0 7>; |
| status = "disabled"; |
| }; |
| |
| usart1: serial@40013800 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40013800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00004000>; |
| resets = <&rctl STM32_RESET(APB2, 14U)>; |
| interrupts = <37 0>; |
| status = "disabled"; |
| }; |
| |
| usart2: serial@40004400 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40004400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00020000>; |
| resets = <&rctl STM32_RESET(APB1, 17U)>; |
| interrupts = <38 0>; |
| status = "disabled"; |
| }; |
| |
| usart3: serial@40004800 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40004800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>; |
| resets = <&rctl STM32_RESET(APB1, 18U)>; |
| interrupts = <39 0>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@40004c00 { |
| compatible = "st,stm32-uart"; |
| reg = <0x40004c00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>; |
| resets = <&rctl STM32_RESET(APB1, 19U)>; |
| interrupts = <52 0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@40005400 { |
| compatible = "st,stm32-i2c-v2"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40005400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00200000>, |
| /* I2C clock source should always be defined, |
| * even for the default value |
| */ |
| <&rcc STM32_SRC_SYSCLK I2C1_SEL(1)>; |
| interrupts = <31 0>, <32 0>; |
| interrupt-names = "event", "error"; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@40013000 { |
| compatible = "st,stm32-spi-fifo", "st,stm32-spi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40013000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00001000>; |
| interrupts = <35 5>; |
| status = "disabled"; |
| }; |
| |
| dac1: dac@40007400 { |
| compatible = "st,stm32-dac"; |
| reg = <0x40007400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x20000000>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| usb: usb@40005c00 { |
| compatible = "st,stm32-usb"; |
| reg = <0x40005c00 0x400>; |
| interrupts = <20 0>; |
| interrupt-names = "usb"; |
| num-bidir-endpoints = <8>; |
| ram-size = <512>; |
| phys = <&usb_fs_phy>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00800000>; |
| status = "disabled"; |
| }; |
| |
| timers2: timers@40000000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40000000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000001>; |
| resets = <&rctl STM32_RESET(APB1, 0U)>; |
| interrupts = <28 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| counter { |
| compatible = "st,stm32-counter"; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers3: timers@40000400 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40000400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000002>; |
| resets = <&rctl STM32_RESET(APB1, 1U)>; |
| interrupts = <29 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| counter { |
| compatible = "st,stm32-counter"; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers6: timers@40001000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000010>; |
| resets = <&rctl STM32_RESET(APB1, 4U)>; |
| interrupts = <54 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| counter { |
| compatible = "st,stm32-counter"; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers7: timers@40001400 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40001400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000020>; |
| resets = <&rctl STM32_RESET(APB1, 5U)>; |
| interrupts = <55 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| counter { |
| compatible = "st,stm32-counter"; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers15: timers@40014000 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00010000>; |
| resets = <&rctl STM32_RESET(APB2, 16U)>; |
| interrupts = <24 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| counter { |
| compatible = "st,stm32-counter"; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers16: timers@40014400 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00020000>; |
| resets = <&rctl STM32_RESET(APB2, 17U)>; |
| interrupts = <25 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| counter { |
| compatible = "st,stm32-counter"; |
| status = "disabled"; |
| }; |
| }; |
| |
| timers17: timers@40014800 { |
| compatible = "st,stm32-timers"; |
| reg = <0x40014800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00040000>; |
| resets = <&rctl STM32_RESET(APB2, 18U)>; |
| interrupts = <26 0>; |
| interrupt-names = "global"; |
| st,prescaler = <0>; |
| status = "disabled"; |
| |
| pwm { |
| compatible = "st,stm32-pwm"; |
| status = "disabled"; |
| #pwm-cells = <3>; |
| }; |
| |
| counter { |
| compatible = "st,stm32-counter"; |
| status = "disabled"; |
| }; |
| }; |
| |
| rtc: rtc@40002800 { |
| compatible = "st,stm32-rtc"; |
| reg = <0x40002800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x10000000>; |
| interrupts = <41 0>; |
| prescaler = <32768>; |
| status = "disabled"; |
| }; |
| |
| can1: can@40006400 { |
| compatible = "st,stm32-bxcan"; |
| reg = <0x40006400 0x400>; |
| interrupts = <19 0>, <20 0>, <21 0>, <22 0>; |
| interrupt-names = "TX", "RX0", "RX1", "SCE"; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x02000000>; |
| status = "disabled"; |
| sample-point = <875>; |
| }; |
| |
| dma1: dma@40020000 { |
| compatible = "st,stm32-dma-v2bis"; |
| #dma-cells = <2>; |
| reg = <0x40020000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x1>; |
| interrupts = <11 0 12 0 13 0 14 0 15 0 16 0 17 0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| die_temp: dietemp { |
| compatible = "st,stm32-temp-cal"; |
| ts-cal1-addr = <0x1FFFF7B8>; |
| ts-cal2-addr = <0x1FFFF7C2>; |
| ts-cal1-temp = <30>; |
| ts-cal2-temp = <110>; |
| ts-cal-vrefanalog = <3300>; |
| io-channels = <&adc1 16>; |
| status = "disabled"; |
| }; |
| |
| vref: vref { |
| compatible = "st,stm32-vref"; |
| vrefint-cal-addr = <0x1FFFF7BA>; |
| vrefint-cal-mv = <3300>; |
| io-channels = <&adc1 18>; |
| status = "disabled"; |
| }; |
| |
| vbat: vbat { |
| compatible = "st,stm32-vbat"; |
| ratio = <2>; |
| io-channels = <&adc1 17>; |
| status = "disabled"; |
| }; |
| |
| usb_fs_phy: usbphy { |
| compatible = "usb-nop-xceiv"; |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| &nvic { |
| arm,num-irq-priority-bits = <4>; |
| }; |
