| /* |
| * Copyright 2022 Nordic Semiconductor ASA |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/drivers/regulator.h> |
| |
| void regulator_common_data_init(const struct device *dev) |
| { |
| struct regulator_common_data *data = dev->data; |
| |
| #ifdef CONFIG_REGULATOR_THREAD_SAFE_REFCNT |
| (void)k_mutex_init(&data->lock); |
| #endif |
| data->refcnt = 0; |
| } |
| |
| int regulator_common_init(const struct device *dev, bool is_enabled) |
| { |
| const struct regulator_driver_api *api = dev->api; |
| const struct regulator_common_config *config = dev->config; |
| struct regulator_common_data *data = dev->data; |
| int32_t current_uv; |
| int ret; |
| |
| if (config->initial_mode != REGULATOR_INITIAL_MODE_UNKNOWN) { |
| ret = regulator_set_mode(dev, config->initial_mode); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| |
| if (config->init_uv > INT32_MIN) { |
| ret = regulator_set_voltage(dev, config->init_uv, config->init_uv); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| |
| /* If we have valid range values, we try to match them before enabling */ |
| if ((config->min_uv > INT32_MIN) || (config->max_uv < INT32_MAX)) { |
| |
| ret = regulator_get_voltage(dev, ¤t_uv); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| /* Snap to closest interval value if out of range */ |
| if (current_uv < config->min_uv) { |
| ret = regulator_set_voltage(dev, config->min_uv, config->min_uv); |
| if (ret < 0) { |
| return ret; |
| } |
| } else if (current_uv > config->max_uv) { |
| ret = regulator_set_voltage(dev, config->max_uv, config->max_uv); |
| if (ret < 0) { |
| return ret; |
| } |
| } |
| } |
| |
| if (is_enabled) { |
| data->refcnt++; |
| } else if ((config->flags & REGULATOR_INIT_ENABLED) != 0U) { |
| ret = api->enable(dev); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| data->refcnt++; |
| } |
| |
| return 0; |
| } |
| |
| int regulator_enable(const struct device *dev) |
| { |
| const struct regulator_driver_api *api = dev->api; |
| const struct regulator_common_config *config = dev->config; |
| struct regulator_common_data *data = dev->data; |
| int ret = 0; |
| |
| /* enable not supported (always on) */ |
| if (api->enable == NULL) { |
| return 0; |
| } |
| |
| /* regulator must stay always on */ |
| if ((config->flags & REGULATOR_ALWAYS_ON) != 0U) { |
| return 0; |
| } |
| |
| #ifdef CONFIG_REGULATOR_THREAD_SAFE_REFCNT |
| (void)k_mutex_lock(&data->lock, K_FOREVER); |
| #endif |
| |
| data->refcnt++; |
| |
| if (data->refcnt == 1) { |
| ret = api->enable(dev); |
| if (ret < 0) { |
| data->refcnt--; |
| } |
| } |
| |
| #ifdef CONFIG_REGULATOR_THREAD_SAFE_REFCNT |
| k_mutex_unlock(&data->lock); |
| #endif |
| |
| return ret; |
| } |
| |
| bool regulator_is_enabled(const struct device *dev) |
| { |
| const struct regulator_common_config *config = dev->config; |
| struct regulator_common_data *data = dev->data; |
| bool enabled; |
| |
| if ((config->flags & REGULATOR_ALWAYS_ON) != 0U) { |
| enabled = true; |
| } else { |
| #ifdef CONFIG_REGULATOR_THREAD_SAFE_REFCNT |
| (void)k_mutex_lock(&data->lock, K_FOREVER); |
| #endif |
| enabled = data->refcnt != 0; |
| #ifdef CONFIG_REGULATOR_THREAD_SAFE_REFCNT |
| k_mutex_unlock(&data->lock); |
| #endif |
| } |
| |
| return enabled; |
| } |
| |
| int regulator_disable(const struct device *dev) |
| { |
| const struct regulator_driver_api *api = dev->api; |
| const struct regulator_common_config *config = dev->config; |
| struct regulator_common_data *data = dev->data; |
| int ret = 0; |
| |
| /* disable not supported (always on) */ |
| if (api->disable == NULL) { |
| return 0; |
| } |
| |
| /* regulator must stay always on */ |
| if ((config->flags & REGULATOR_ALWAYS_ON) != 0U) { |
| return 0; |
| } |
| |
| #ifdef CONFIG_REGULATOR_THREAD_SAFE_REFCNT |
| (void)k_mutex_lock(&data->lock, K_FOREVER); |
| #endif |
| |
| data->refcnt--; |
| |
| if (data->refcnt == 0) { |
| ret = api->disable(dev); |
| if (ret < 0) { |
| data->refcnt++; |
| } |
| } |
| |
| #ifdef CONFIG_REGULATOR_THREAD_SAFE_REFCNT |
| k_mutex_unlock(&data->lock); |
| #endif |
| |
| return ret; |
| } |
| |
| bool regulator_is_supported_voltage(const struct device *dev, int32_t min_uv, |
| int32_t max_uv) |
| { |
| const struct regulator_common_config *config = dev->config; |
| unsigned int volt_cnt; |
| |
| /* voltage may not be allowed, even if supported */ |
| if ((min_uv > config->max_uv) || (max_uv < config->min_uv)) { |
| return false; |
| } |
| |
| volt_cnt = regulator_count_voltages(dev); |
| |
| for (unsigned int idx = 0U; idx < volt_cnt; idx++) { |
| int32_t volt_uv; |
| |
| (void)regulator_list_voltage(dev, idx, &volt_uv); |
| |
| if ((volt_uv >= min_uv) && (volt_uv <= max_uv)) { |
| return true; |
| } |
| } |
| |
| return false; |
| } |
| |
| int regulator_set_voltage(const struct device *dev, int32_t min_uv, |
| int32_t max_uv) |
| { |
| const struct regulator_common_config *config = dev->config; |
| const struct regulator_driver_api *api = dev->api; |
| |
| if (api->set_voltage == NULL) { |
| return -ENOSYS; |
| } |
| |
| /* voltage may not be allowed, even if supported */ |
| if ((min_uv > config->max_uv) || (max_uv < config->min_uv)) { |
| return -EINVAL; |
| } |
| |
| return api->set_voltage(dev, min_uv, max_uv); |
| } |
| |
| int regulator_set_current_limit(const struct device *dev, int32_t min_ua, |
| int32_t max_ua) |
| { |
| const struct regulator_common_config *config = dev->config; |
| const struct regulator_driver_api *api = dev->api; |
| |
| if (api->set_current_limit == NULL) { |
| return -ENOSYS; |
| } |
| |
| /* current limit may not be allowed, even if supported */ |
| if ((min_ua > config->max_ua) || (max_ua < config->min_ua)) { |
| return -EINVAL; |
| } |
| |
| return api->set_current_limit(dev, min_ua, max_ua); |
| } |
| |
| int regulator_set_mode(const struct device *dev, regulator_mode_t mode) |
| { |
| const struct regulator_common_config *config = dev->config; |
| const struct regulator_driver_api *api = dev->api; |
| |
| if (api->set_mode == NULL) { |
| return -ENOSYS; |
| } |
| |
| /* no mode restrictions */ |
| if (config->allowed_modes_cnt == 0U) { |
| return api->set_mode(dev, mode); |
| } |
| |
| /* check if mode is allowed, apply if it is */ |
| for (uint8_t i = 0U; i < config->allowed_modes_cnt; i++) { |
| if (mode == config->allowed_modes[i]) { |
| return api->set_mode(dev, mode); |
| } |
| } |
| |
| return -ENOTSUP; |
| } |