| /* |
| * Copyright (c) 2018 Nordic Semiconductor ASA |
| * Copyright (c) 2017 Linaro Limited |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <nordic/nrf52840_qiaa.dtsi> |
| |
| / { |
| model = "Nordic nRF52840 Dongle NRF52840"; |
| compatible = "nordic,nrf52840-dongle-nrf52840"; |
| |
| chosen { |
| zephyr,console = &uart0; |
| zephyr,shell-uart = &uart0; |
| zephyr,uart-mcumgr = &uart0; |
| zephyr,bt-mon-uart = &uart0; |
| zephyr,bt-c2h-uart = &uart0; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,code-partition = &slot0_partition; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| led0_green: led_0 { |
| gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; |
| label = "Green LED 0"; |
| }; |
| led1_red: led_1 { |
| gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; |
| label = "Red LED 1"; |
| }; |
| led1_green: led_2 { |
| gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; |
| label = "Green LED 1"; |
| }; |
| led1_blue: led_3 { |
| gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; |
| label = "Blue LED 1"; |
| }; |
| }; |
| |
| pwmleds { |
| compatible = "pwm-leds"; |
| red_pwm_led: pwm_led_0 { |
| pwms = <&pwm0 8>; |
| }; |
| green_pwm_led: pwm_led_1 { |
| pwms = <&pwm0 41>; |
| }; |
| blue_pwm_led: pwm_led_2 { |
| pwms = <&pwm0 12>; |
| }; |
| }; |
| |
| buttons { |
| compatible = "gpio-keys"; |
| button0: button_0 { |
| gpios = <&gpio1 6 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; |
| label = "Push button switch 0"; |
| }; |
| }; |
| |
| /* These aliases are provided for compatibility with samples */ |
| aliases { |
| sw0 = &button0; |
| led0 = &led0_green; |
| led1 = &led1_red; |
| led2 = &led1_green; |
| led3 = &led1_blue; |
| led0-green = &led0_green; |
| led1-red = &led1_red; |
| led1-green = &led1_green; |
| led1-blue = &led1_blue; |
| pwm-led0 = &red_pwm_led; |
| pwm-led1 = &green_pwm_led; |
| pwm-led2 = &blue_pwm_led; |
| red-pwm-led = &red_pwm_led; |
| green-pwm-led = &green_pwm_led; |
| blue-pwm-led = &blue_pwm_led; |
| }; |
| }; |
| |
| &adc { |
| status = "okay"; |
| }; |
| |
| &gpiote { |
| status = "okay"; |
| }; |
| |
| &gpio0 { |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| status = "okay"; |
| }; |
| |
| &uart0 { |
| compatible = "nordic,nrf-uarte"; |
| status = "okay"; |
| current-speed = <115200>; |
| tx-pin = <20>; |
| rx-pin = <24>; |
| rts-pin = <17>; |
| cts-pin = <22>; |
| }; |
| |
| &i2c0 { |
| compatible = "nordic,nrf-twi"; |
| status = "okay"; |
| sda-pin = <26>; |
| scl-pin = <27>; |
| }; |
| |
| &i2c1 { |
| compatible = "nordic,nrf-twi"; |
| /* Cannot be used together with spi1. */ |
| /* status = "okay"; */ |
| sda-pin = <30>; |
| scl-pin = <31>; |
| }; |
| |
| &pwm0 { |
| status = "okay"; |
| ch0-pin = <8>; |
| ch0-inverted; |
| ch1-pin = <41>; |
| ch1-inverted; |
| ch2-pin = <12>; |
| ch2-inverted; |
| }; |
| |
| /* |
| * By default, not adding all available SPI instances (spi2, spi3) due to |
| * limited GPIOs available on dongle board. |
| */ |
| &spi0 { |
| compatible = "nordic,nrf-spi"; |
| /* Cannot be used together with i2c0. */ |
| /* status = "okay"; */ |
| sck-pin = <27>; |
| mosi-pin = <26>; |
| miso-pin = <42>; |
| }; |
| |
| &spi1 { |
| compatible = "nordic,nrf-spi"; |
| status = "okay"; |
| sck-pin = <31>; |
| mosi-pin = <30>; |
| miso-pin = <45>; |
| }; |
| |
| /* Include flash partition table. |
| * Two partition tables are available: |
| * fstab-stock -compatible with Nordic nRF5 bootloader, default |
| * fstab-debugger -to use an external debugger, w/o the nRF5 bootloader |
| */ |
| #include "fstab-stock.dts" |
| |
| &usbd { |
| compatible = "nordic,nrf-usbd"; |
| status = "okay"; |
| }; |