| /* Bluetooth Mesh */ |
| |
| /* |
| * Copyright (c) 2018 Nordic Semiconductor ASA |
| * Copyright (c) 2017 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr.h> |
| #include <debug/stack.h> |
| #include <sys/util.h> |
| |
| #include <net/buf.h> |
| #include <bluetooth/bluetooth.h> |
| #include <bluetooth/hci.h> |
| #include <bluetooth/conn.h> |
| #include <bluetooth/mesh.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_MESH_DEBUG_ADV) |
| #define LOG_MODULE_NAME bt_mesh_adv |
| #include "common/log.h" |
| |
| #include "host/hci_core.h" |
| |
| #include "adv.h" |
| #include "net.h" |
| #include "foundation.h" |
| #include "beacon.h" |
| #include "prov.h" |
| #include "proxy.h" |
| |
| /* Convert from ms to 0.625ms units */ |
| #define ADV_SCAN_UNIT(_ms) ((_ms) * 8 / 5) |
| |
| /* Window and Interval are equal for continuous scanning */ |
| #define MESH_SCAN_INTERVAL_MS 30 |
| #define MESH_SCAN_WINDOW_MS 30 |
| #define MESH_SCAN_INTERVAL ADV_SCAN_UNIT(MESH_SCAN_INTERVAL_MS) |
| #define MESH_SCAN_WINDOW ADV_SCAN_UNIT(MESH_SCAN_WINDOW_MS) |
| |
| /* Pre-5.0 controllers enforce a minimum interval of 100ms |
| * whereas 5.0+ controllers can go down to 20ms. |
| */ |
| #define ADV_INT_DEFAULT_MS 100 |
| #define ADV_INT_FAST_MS 20 |
| |
| #if defined(CONFIG_BT_HOST_CRYPTO) |
| #define ADV_STACK_SIZE 1024 |
| #else |
| #define ADV_STACK_SIZE 768 |
| #endif |
| |
| static K_FIFO_DEFINE(adv_queue); |
| static struct k_thread adv_thread_data; |
| static K_THREAD_STACK_DEFINE(adv_thread_stack, ADV_STACK_SIZE); |
| |
| static const u8_t adv_type[] = { |
| [BT_MESH_ADV_PROV] = BT_DATA_MESH_PROV, |
| [BT_MESH_ADV_DATA] = BT_DATA_MESH_MESSAGE, |
| [BT_MESH_ADV_BEACON] = BT_DATA_MESH_BEACON, |
| [BT_MESH_ADV_URI] = BT_DATA_URI, |
| }; |
| |
| NET_BUF_POOL_DEFINE(adv_buf_pool, CONFIG_BT_MESH_ADV_BUF_COUNT, |
| BT_MESH_ADV_DATA_SIZE, BT_MESH_ADV_USER_DATA_SIZE, NULL); |
| |
| static struct bt_mesh_adv adv_pool[CONFIG_BT_MESH_ADV_BUF_COUNT]; |
| |
| static struct bt_mesh_adv *adv_alloc(int id) |
| { |
| return &adv_pool[id]; |
| } |
| |
| static inline void adv_send_start(u16_t duration, int err, |
| const struct bt_mesh_send_cb *cb, |
| void *cb_data) |
| { |
| if (cb && cb->start) { |
| cb->start(duration, err, cb_data); |
| } |
| } |
| |
| static inline void adv_send_end(int err, const struct bt_mesh_send_cb *cb, |
| void *cb_data) |
| { |
| if (cb && cb->end) { |
| cb->end(err, cb_data); |
| } |
| } |
| |
| static inline void adv_send(struct net_buf *buf) |
| { |
| const s32_t adv_int_min = ((bt_dev.hci_version >= BT_HCI_VERSION_5_0) ? |
| ADV_INT_FAST_MS : ADV_INT_DEFAULT_MS); |
| const struct bt_mesh_send_cb *cb = BT_MESH_ADV(buf)->cb; |
| void *cb_data = BT_MESH_ADV(buf)->cb_data; |
| struct bt_le_adv_param param = {}; |
| u16_t duration, adv_int; |
| struct bt_data ad; |
| int err; |
| |
| adv_int = MAX(adv_int_min, |
| BT_MESH_TRANSMIT_INT(BT_MESH_ADV(buf)->xmit)); |
| duration = (MESH_SCAN_WINDOW_MS + |
| ((BT_MESH_TRANSMIT_COUNT(BT_MESH_ADV(buf)->xmit) + 1) * |
| (adv_int + 10))); |
| |
| BT_DBG("type %u len %u: %s", BT_MESH_ADV(buf)->type, |
| buf->len, bt_hex(buf->data, buf->len)); |
| BT_DBG("count %u interval %ums duration %ums", |
| BT_MESH_TRANSMIT_COUNT(BT_MESH_ADV(buf)->xmit) + 1, adv_int, |
| duration); |
| |
| ad.type = adv_type[BT_MESH_ADV(buf)->type]; |
| ad.data_len = buf->len; |
| ad.data = buf->data; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_DEBUG_USE_ID_ADDR)) { |
| param.options = BT_LE_ADV_OPT_USE_IDENTITY; |
| } else { |
| param.options = 0U; |
| } |
| |
| param.id = BT_ID_DEFAULT; |
| param.interval_min = ADV_SCAN_UNIT(adv_int); |
| param.interval_max = param.interval_min; |
| |
| err = bt_le_adv_start(¶m, &ad, 1, NULL, 0); |
| net_buf_unref(buf); |
| adv_send_start(duration, err, cb, cb_data); |
| if (err) { |
| BT_ERR("Advertising failed: err %d", err); |
| return; |
| } |
| |
| BT_DBG("Advertising started. Sleeping %u ms", duration); |
| |
| k_sleep(K_MSEC(duration)); |
| |
| err = bt_le_adv_stop(); |
| adv_send_end(err, cb, cb_data); |
| if (err) { |
| BT_ERR("Stopping advertising failed: err %d", err); |
| return; |
| } |
| |
| BT_DBG("Advertising stopped"); |
| } |
| |
| static void adv_thread(void *p1, void *p2, void *p3) |
| { |
| BT_DBG("started"); |
| |
| while (1) { |
| struct net_buf *buf; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PROXY)) { |
| buf = net_buf_get(&adv_queue, K_NO_WAIT); |
| while (!buf) { |
| k_timeout_t timeout; |
| |
| timeout = bt_mesh_proxy_adv_start(); |
| BT_DBG("Proxy Advertising"); |
| |
| buf = net_buf_get(&adv_queue, timeout); |
| bt_mesh_proxy_adv_stop(); |
| } |
| } else { |
| buf = net_buf_get(&adv_queue, K_FOREVER); |
| } |
| |
| if (!buf) { |
| continue; |
| } |
| |
| /* busy == 0 means this was canceled */ |
| if (BT_MESH_ADV(buf)->busy) { |
| BT_MESH_ADV(buf)->busy = 0U; |
| adv_send(buf); |
| } else { |
| net_buf_unref(buf); |
| } |
| |
| /* Give other threads a chance to run */ |
| k_yield(); |
| } |
| } |
| |
| void bt_mesh_adv_update(void) |
| { |
| BT_DBG(""); |
| |
| k_fifo_cancel_wait(&adv_queue); |
| } |
| |
| struct net_buf *bt_mesh_adv_create_from_pool(struct net_buf_pool *pool, |
| bt_mesh_adv_alloc_t get_id, |
| enum bt_mesh_adv_type type, |
| u8_t xmit, k_timeout_t timeout) |
| { |
| struct bt_mesh_adv *adv; |
| struct net_buf *buf; |
| |
| if (atomic_test_bit(bt_mesh.flags, BT_MESH_SUSPENDED)) { |
| BT_WARN("Refusing to allocate buffer while suspended"); |
| return NULL; |
| } |
| |
| buf = net_buf_alloc(pool, timeout); |
| if (!buf) { |
| return NULL; |
| } |
| |
| adv = get_id(net_buf_id(buf)); |
| BT_MESH_ADV(buf) = adv; |
| |
| (void)memset(adv, 0, sizeof(*adv)); |
| |
| adv->type = type; |
| adv->xmit = xmit; |
| |
| return buf; |
| } |
| |
| struct net_buf *bt_mesh_adv_create(enum bt_mesh_adv_type type, u8_t xmit, |
| k_timeout_t timeout) |
| { |
| return bt_mesh_adv_create_from_pool(&adv_buf_pool, adv_alloc, type, |
| xmit, timeout); |
| } |
| |
| void bt_mesh_adv_send(struct net_buf *buf, const struct bt_mesh_send_cb *cb, |
| void *cb_data) |
| { |
| BT_DBG("type 0x%02x len %u: %s", BT_MESH_ADV(buf)->type, buf->len, |
| bt_hex(buf->data, buf->len)); |
| |
| BT_MESH_ADV(buf)->cb = cb; |
| BT_MESH_ADV(buf)->cb_data = cb_data; |
| BT_MESH_ADV(buf)->busy = 1U; |
| |
| net_buf_put(&adv_queue, net_buf_ref(buf)); |
| } |
| |
| static void bt_mesh_scan_cb(const bt_addr_le_t *addr, s8_t rssi, |
| u8_t adv_type, struct net_buf_simple *buf) |
| { |
| if (adv_type != BT_GAP_ADV_TYPE_ADV_NONCONN_IND) { |
| return; |
| } |
| |
| BT_DBG("len %u: %s", buf->len, bt_hex(buf->data, buf->len)); |
| |
| while (buf->len > 1) { |
| struct net_buf_simple_state state; |
| u8_t len, type; |
| |
| len = net_buf_simple_pull_u8(buf); |
| /* Check for early termination */ |
| if (len == 0U) { |
| return; |
| } |
| |
| if (len > buf->len) { |
| BT_WARN("AD malformed"); |
| return; |
| } |
| |
| net_buf_simple_save(buf, &state); |
| |
| type = net_buf_simple_pull_u8(buf); |
| |
| buf->len = len - 1; |
| |
| switch (type) { |
| case BT_DATA_MESH_MESSAGE: |
| bt_mesh_net_recv(buf, rssi, BT_MESH_NET_IF_ADV); |
| break; |
| #if defined(CONFIG_BT_MESH_PB_ADV) |
| case BT_DATA_MESH_PROV: |
| bt_mesh_pb_adv_recv(buf); |
| break; |
| #endif |
| case BT_DATA_MESH_BEACON: |
| bt_mesh_beacon_recv(buf); |
| break; |
| default: |
| break; |
| } |
| |
| net_buf_simple_restore(buf, &state); |
| net_buf_simple_pull(buf, len); |
| } |
| } |
| |
| void bt_mesh_adv_init(void) |
| { |
| k_thread_create(&adv_thread_data, adv_thread_stack, |
| K_THREAD_STACK_SIZEOF(adv_thread_stack), adv_thread, |
| NULL, NULL, NULL, K_PRIO_COOP(7), 0, K_NO_WAIT); |
| k_thread_name_set(&adv_thread_data, "BT Mesh adv"); |
| } |
| |
| int bt_mesh_scan_enable(void) |
| { |
| struct bt_le_scan_param scan_param = { |
| .type = BT_HCI_LE_SCAN_PASSIVE, |
| .filter_dup = BT_LE_SCAN_OPT_NONE, |
| .interval = MESH_SCAN_INTERVAL, |
| .window = MESH_SCAN_WINDOW }; |
| int err; |
| |
| BT_DBG(""); |
| |
| err = bt_le_scan_start(&scan_param, bt_mesh_scan_cb); |
| if (err && err != -EALREADY) { |
| BT_ERR("starting scan failed (err %d)", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| int bt_mesh_scan_disable(void) |
| { |
| int err; |
| |
| BT_DBG(""); |
| |
| err = bt_le_scan_stop(); |
| if (err && err != -EALREADY) { |
| BT_ERR("stopping scan failed (err %d)", err); |
| return err; |
| } |
| |
| return 0; |
| } |