| /* Bluetooth Mesh */ |
| |
| /* |
| * Copyright (c) 2017 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr.h> |
| #include <errno.h> |
| #include <sys/atomic.h> |
| #include <sys/util.h> |
| #include <sys/byteorder.h> |
| |
| #include <net/buf.h> |
| #include <bluetooth/bluetooth.h> |
| #include <bluetooth/conn.h> |
| #include <bluetooth/mesh.h> |
| #include <bluetooth/uuid.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_MESH_DEBUG_PROV) |
| #define LOG_MODULE_NAME bt_mesh_prov |
| #include "common/log.h" |
| |
| #include "host/ecc.h" |
| #include "host/testing.h" |
| |
| #include "crypto.h" |
| #include "adv.h" |
| #include "mesh.h" |
| #include "net.h" |
| #include "beacon.h" |
| #include "access.h" |
| #include "foundation.h" |
| #include "proxy.h" |
| #include "prov.h" |
| #include "settings.h" |
| #include "prov_bearer.h" |
| |
| |
| #define AUTH_METHOD_NO_OOB 0x00 |
| #define AUTH_METHOD_STATIC 0x01 |
| #define AUTH_METHOD_OUTPUT 0x02 |
| #define AUTH_METHOD_INPUT 0x03 |
| |
| #define OUTPUT_OOB_BLINK 0x00 |
| #define OUTPUT_OOB_BEEP 0x01 |
| #define OUTPUT_OOB_VIBRATE 0x02 |
| #define OUTPUT_OOB_NUMBER 0x03 |
| #define OUTPUT_OOB_STRING 0x04 |
| |
| #define INPUT_OOB_PUSH 0x00 |
| #define INPUT_OOB_TWIST 0x01 |
| #define INPUT_OOB_NUMBER 0x02 |
| #define INPUT_OOB_STRING 0x03 |
| |
| #define PUB_KEY_NO_OOB 0x00 |
| #define PUB_KEY_OOB 0x01 |
| |
| #define PROV_INVITE 0x00 |
| #define PROV_CAPABILITIES 0x01 |
| #define PROV_START 0x02 |
| #define PROV_PUB_KEY 0x03 |
| #define PROV_INPUT_COMPLETE 0x04 |
| #define PROV_CONFIRM 0x05 |
| #define PROV_RANDOM 0x06 |
| #define PROV_DATA 0x07 |
| #define PROV_COMPLETE 0x08 |
| #define PROV_FAILED 0x09 |
| |
| #define PROV_NO_PDU 0xff |
| |
| #define PROV_ALG_P256 0x00 |
| |
| enum { |
| WAIT_PUB_KEY, /* Waiting for local PubKey to be generated */ |
| LINK_ACTIVE, /* Link has been opened */ |
| WAIT_NUMBER, /* Waiting for number input from user */ |
| WAIT_STRING, /* Waiting for string input from user */ |
| NOTIFY_INPUT_COMPLETE, /* Notify that input has been completed. */ |
| PROVISIONER, /* The link was opened as provisioner */ |
| |
| NUM_FLAGS, |
| }; |
| |
| #if defined(CONFIG_BT_MESH_PROVISIONER) |
| #define PROVISIONER_LINK 1 |
| #else |
| #define PROVISIONER_LINK 0 |
| #endif |
| |
| struct provisioner_link { |
| struct bt_mesh_cdb_node *node; |
| u16_t addr; |
| u16_t net_idx; |
| u8_t attention_duration; |
| u8_t uuid[16]; |
| }; |
| |
| struct prov_link { |
| ATOMIC_DEFINE(flags, NUM_FLAGS); |
| struct provisioner_link provisioner[PROVISIONER_LINK]; |
| |
| u8_t dhkey[32]; /* Calculated DHKey */ |
| u8_t expect; /* Next expected PDU */ |
| |
| u8_t oob_method; |
| u8_t oob_action; |
| u8_t oob_size; |
| |
| u8_t conf[16]; /* Remote Confirmation */ |
| u8_t rand[16]; /* Local Random */ |
| u8_t auth[16]; /* Authentication Value */ |
| |
| u8_t conf_salt[16]; /* ConfirmationSalt */ |
| u8_t conf_key[16]; /* ConfirmationKey */ |
| u8_t conf_inputs[145]; /* ConfirmationInputs */ |
| u8_t prov_salt[16]; /* Provisioning Salt */ |
| |
| const struct prov_bearer *bearer; |
| }; |
| |
| #define PROV_BUF(name, len) \ |
| NET_BUF_SIMPLE_DEFINE(name, PROV_BEARER_BUF_HEADROOM + len) |
| |
| static struct prov_link link; |
| |
| static const struct bt_mesh_prov *prov; |
| |
| static void send_pub_key(void); |
| static void pub_key_ready(const u8_t *pkey); |
| static void start_sent(int err, void *cb_data); |
| |
| static int reset_state(void) |
| { |
| static struct bt_pub_key_cb pub_key_cb = { |
| .func = pub_key_ready, |
| }; |
| int err; |
| |
| /* Disable Attention Timer if it was set */ |
| if (link.conf_inputs[0]) { |
| bt_mesh_attention(NULL, 0); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PROVISIONER) && |
| link.provisioner->node != NULL) { |
| bt_mesh_cdb_node_del(link.provisioner->node, false); |
| } |
| |
| memset(&link, 0, sizeof(link)); |
| |
| err = bt_pub_key_gen(&pub_key_cb); |
| if (err) { |
| BT_ERR("Failed to generate public key (%d)", err); |
| return err; |
| } |
| |
| return 0; |
| } |
| |
| static inline int prov_send(struct net_buf_simple *buf, |
| prov_bearer_send_complete_t cb) |
| { |
| return link.bearer->send(buf, cb, NULL); |
| } |
| |
| static void prov_buf_init(struct net_buf_simple *buf, u8_t type) |
| { |
| net_buf_simple_reserve(buf, PROV_BEARER_BUF_HEADROOM); |
| net_buf_simple_add_u8(buf, type); |
| } |
| |
| static void prov_link_close(enum prov_bearer_link_status status) |
| { |
| BT_DBG("%u", status); |
| link.expect = PROV_NO_PDU; |
| |
| link.bearer->link_close(status); |
| } |
| |
| static void prov_send_fail_msg(u8_t err) |
| { |
| PROV_BUF(buf, 2); |
| |
| BT_DBG("%u", err); |
| |
| link.expect = PROV_NO_PDU; |
| |
| prov_buf_init(&buf, PROV_FAILED); |
| net_buf_simple_add_u8(&buf, err); |
| |
| if (prov_send(&buf, NULL)) { |
| BT_ERR("Failed to send Provisioning Failed message"); |
| } |
| } |
| |
| static void prov_fail(u8_t reason) |
| { |
| /* According to Bluetooth Mesh Specification v1.0.1, Section 5.4.4, the |
| * provisioner just closes the link when something fails, while the |
| * provisionee sends the fail message, and waits for the provisioner to |
| * close the link. |
| */ |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| prov_link_close(PROV_BEARER_LINK_STATUS_FAIL); |
| } else { |
| prov_send_fail_msg(reason); |
| } |
| } |
| |
| static void prov_invite(const u8_t *data) |
| { |
| PROV_BUF(buf, 12); |
| |
| BT_DBG("Attention Duration: %u seconds", data[0]); |
| |
| if (data[0]) { |
| bt_mesh_attention(NULL, data[0]); |
| } |
| |
| link.conf_inputs[0] = data[0]; |
| |
| prov_buf_init(&buf, PROV_CAPABILITIES); |
| |
| /* Number of Elements supported */ |
| net_buf_simple_add_u8(&buf, bt_mesh_elem_count()); |
| |
| /* Supported algorithms - FIPS P-256 Eliptic Curve */ |
| net_buf_simple_add_be16(&buf, BIT(PROV_ALG_P256)); |
| |
| /* Public Key Type, Only "No OOB" Public Key is supported */ |
| net_buf_simple_add_u8(&buf, PUB_KEY_NO_OOB); |
| |
| /* Static OOB Type */ |
| net_buf_simple_add_u8(&buf, prov->static_val ? BIT(0) : 0x00); |
| |
| /* Output OOB Size */ |
| net_buf_simple_add_u8(&buf, prov->output_size); |
| |
| /* Output OOB Action */ |
| net_buf_simple_add_be16(&buf, prov->output_actions); |
| |
| /* Input OOB Size */ |
| net_buf_simple_add_u8(&buf, prov->input_size); |
| |
| /* Input OOB Action */ |
| net_buf_simple_add_be16(&buf, prov->input_actions); |
| |
| memcpy(&link.conf_inputs[1], &buf.data[1], 11); |
| |
| if (prov_send(&buf, NULL)) { |
| BT_ERR("Failed to send capabilities"); |
| return; |
| } |
| |
| link.expect = PROV_START; |
| } |
| |
| static void send_invite(void) |
| { |
| PROV_BUF(inv, 2); |
| |
| BT_DBG(""); |
| |
| prov_buf_init(&inv, PROV_INVITE); |
| net_buf_simple_add_u8(&inv, link.provisioner->attention_duration); |
| |
| link.conf_inputs[0] = link.provisioner->attention_duration; |
| |
| if (prov_send(&inv, NULL)) { |
| BT_ERR("Failed to send invite"); |
| return; |
| } |
| |
| link.expect = PROV_CAPABILITIES; |
| } |
| |
| static void send_start(void) |
| { |
| PROV_BUF(start, 6); |
| |
| BT_DBG(""); |
| |
| prov_buf_init(&start, PROV_START); |
| |
| net_buf_simple_add_u8(&start, PROV_ALG_P256); |
| net_buf_simple_add_u8(&start, PUB_KEY_NO_OOB); |
| net_buf_simple_add_u8(&start, AUTH_METHOD_NO_OOB); |
| memset(link.auth, 0, sizeof(link.auth)); |
| |
| net_buf_simple_add_u8(&start, 0); /* Auth Action */ |
| net_buf_simple_add_u8(&start, 0); /* Auth Size */ |
| |
| memcpy(&link.conf_inputs[12], &start.data[1], 5); |
| |
| if (prov_send(&start, start_sent)) { |
| BT_ERR("Failed to send start"); |
| } |
| } |
| |
| static void start_sent(int err, void *cb_data) |
| { |
| if (IS_ENABLED(CONFIG_BT_MESH_PROVISIONER)) { |
| if (!bt_pub_key_get()) { |
| atomic_set_bit(link.flags, WAIT_PUB_KEY); |
| BT_WARN("Waiting for local public key"); |
| } else { |
| send_pub_key(); |
| } |
| } |
| } |
| |
| static void prov_capabilities(const u8_t *data) |
| { |
| u16_t algorithms, output_action, input_action; |
| |
| if (!IS_ENABLED(CONFIG_BT_MESH_PROVISIONER)) { |
| return; |
| } |
| |
| BT_DBG("Elements: %u", data[0]); |
| |
| algorithms = sys_get_be16(&data[1]); |
| BT_DBG("Algorithms: %u", algorithms); |
| |
| BT_DBG("Public Key Type: 0x%02x", data[3]); |
| BT_DBG("Static OOB Type: 0x%02x", data[4]); |
| BT_DBG("Output OOB Size: %u", data[5]); |
| |
| output_action = sys_get_be16(&data[6]); |
| BT_DBG("Output OOB Action: 0x%04x", output_action); |
| |
| BT_DBG("Input OOB Size: %u", data[8]); |
| |
| input_action = sys_get_be16(&data[9]); |
| BT_DBG("Input OOB Action: 0x%04x", input_action); |
| |
| if (data[0] == 0) { |
| BT_ERR("Invalid number of elements"); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| link.provisioner->node = |
| bt_mesh_cdb_node_alloc(link.provisioner->uuid, |
| link.provisioner->addr, data[0], |
| link.provisioner->net_idx); |
| if (link.provisioner->node == NULL) { |
| BT_ERR("Failed allocating node 0x%04x", link.provisioner->addr); |
| prov_fail(PROV_ERR_RESOURCES); |
| return; |
| } |
| |
| memcpy(&link.conf_inputs[1], data, 11); |
| |
| send_start(); |
| } |
| |
| static bt_mesh_output_action_t output_action(u8_t action) |
| { |
| switch (action) { |
| case OUTPUT_OOB_BLINK: |
| return BT_MESH_BLINK; |
| case OUTPUT_OOB_BEEP: |
| return BT_MESH_BEEP; |
| case OUTPUT_OOB_VIBRATE: |
| return BT_MESH_VIBRATE; |
| case OUTPUT_OOB_NUMBER: |
| return BT_MESH_DISPLAY_NUMBER; |
| case OUTPUT_OOB_STRING: |
| return BT_MESH_DISPLAY_STRING; |
| default: |
| return BT_MESH_NO_OUTPUT; |
| } |
| } |
| |
| static bt_mesh_input_action_t input_action(u8_t action) |
| { |
| switch (action) { |
| case INPUT_OOB_PUSH: |
| return BT_MESH_PUSH; |
| case INPUT_OOB_TWIST: |
| return BT_MESH_TWIST; |
| case INPUT_OOB_NUMBER: |
| return BT_MESH_ENTER_NUMBER; |
| case INPUT_OOB_STRING: |
| return BT_MESH_ENTER_STRING; |
| default: |
| return BT_MESH_NO_INPUT; |
| } |
| } |
| |
| static int prov_auth(u8_t method, u8_t action, u8_t size) |
| { |
| bt_mesh_output_action_t output; |
| bt_mesh_input_action_t input; |
| |
| switch (method) { |
| case AUTH_METHOD_NO_OOB: |
| if (action || size) { |
| return -EINVAL; |
| } |
| |
| (void)memset(link.auth, 0, sizeof(link.auth)); |
| return 0; |
| case AUTH_METHOD_STATIC: |
| if (action || size) { |
| return -EINVAL; |
| } |
| |
| memcpy(link.auth + 16 - prov->static_val_len, |
| prov->static_val, prov->static_val_len); |
| (void)memset(link.auth, 0, |
| sizeof(link.auth) - prov->static_val_len); |
| return 0; |
| |
| case AUTH_METHOD_OUTPUT: |
| output = output_action(action); |
| if (!output) { |
| return -EINVAL; |
| } |
| |
| if (!(prov->output_actions & output)) { |
| return -EINVAL; |
| } |
| |
| if (size > prov->output_size) { |
| return -EINVAL; |
| } |
| |
| atomic_set_bit(link.flags, NOTIFY_INPUT_COMPLETE); |
| |
| if (output == BT_MESH_DISPLAY_STRING) { |
| unsigned char str[9]; |
| u8_t i; |
| |
| bt_rand(str, size); |
| |
| /* Normalize to '0' .. '9' & 'A' .. 'Z' */ |
| for (i = 0U; i < size; i++) { |
| str[i] %= 36; |
| if (str[i] < 10) { |
| str[i] += '0'; |
| } else { |
| str[i] += 'A' - 10; |
| } |
| } |
| str[size] = '\0'; |
| |
| memcpy(link.auth, str, size); |
| (void)memset(link.auth + size, 0, |
| sizeof(link.auth) - size); |
| |
| return prov->output_string((char *)str); |
| } else { |
| u32_t div[8] = { 10, 100, 1000, 10000, 100000, |
| 1000000, 10000000, 100000000 }; |
| u32_t num; |
| |
| bt_rand(&num, sizeof(num)); |
| num %= div[size - 1]; |
| |
| sys_put_be32(num, &link.auth[12]); |
| (void)memset(link.auth, 0, 12); |
| |
| return prov->output_number(output, num); |
| } |
| |
| case AUTH_METHOD_INPUT: |
| input = input_action(action); |
| if (!input) { |
| return -EINVAL; |
| } |
| |
| if (!(prov->input_actions & input)) { |
| return -EINVAL; |
| } |
| |
| if (size > prov->input_size) { |
| return -EINVAL; |
| } |
| |
| if (input == BT_MESH_ENTER_STRING) { |
| atomic_set_bit(link.flags, WAIT_STRING); |
| } else { |
| atomic_set_bit(link.flags, WAIT_NUMBER); |
| } |
| |
| return prov->input(input, size); |
| |
| default: |
| return -EINVAL; |
| } |
| } |
| |
| static void prov_start(const u8_t *data) |
| { |
| BT_DBG("Algorithm: 0x%02x", data[0]); |
| BT_DBG("Public Key: 0x%02x", data[1]); |
| BT_DBG("Auth Method: 0x%02x", data[2]); |
| BT_DBG("Auth Action: 0x%02x", data[3]); |
| BT_DBG("Auth Size: 0x%02x", data[4]); |
| |
| if (data[0] != PROV_ALG_P256) { |
| BT_ERR("Unknown algorithm 0x%02x", data[0]); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| if (data[1] != PUB_KEY_NO_OOB) { |
| BT_ERR("Invalid public key type: 0x%02x", data[1]); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| memcpy(&link.conf_inputs[12], data, 5); |
| |
| link.expect = PROV_PUB_KEY; |
| |
| if (prov_auth(data[2], data[3], data[4]) < 0) { |
| BT_ERR("Invalid authentication method: 0x%02x; " |
| "action: 0x%02x; size: 0x%02x", data[2], data[3], |
| data[4]); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| } |
| } |
| |
| static void send_confirm(void) |
| { |
| PROV_BUF(cfm, 17); |
| |
| BT_DBG("ConfInputs[0] %s", bt_hex(link.conf_inputs, 64)); |
| BT_DBG("ConfInputs[64] %s", bt_hex(&link.conf_inputs[64], 64)); |
| BT_DBG("ConfInputs[128] %s", bt_hex(&link.conf_inputs[128], 17)); |
| |
| if (bt_mesh_prov_conf_salt(link.conf_inputs, link.conf_salt)) { |
| BT_ERR("Unable to generate confirmation salt"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("ConfirmationSalt: %s", bt_hex(link.conf_salt, 16)); |
| |
| if (bt_mesh_prov_conf_key(link.dhkey, link.conf_salt, link.conf_key)) { |
| BT_ERR("Unable to generate confirmation key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("ConfirmationKey: %s", bt_hex(link.conf_key, 16)); |
| |
| if (bt_rand(link.rand, 16)) { |
| BT_ERR("Unable to generate random number"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("LocalRandom: %s", bt_hex(link.rand, 16)); |
| |
| prov_buf_init(&cfm, PROV_CONFIRM); |
| |
| if (bt_mesh_prov_conf(link.conf_key, link.rand, link.auth, |
| net_buf_simple_add(&cfm, 16))) { |
| BT_ERR("Unable to generate confirmation value"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| if (prov_send(&cfm, NULL)) { |
| BT_ERR("Failed to send Provisioning Confirm"); |
| return; |
| } |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| link.expect = PROV_CONFIRM; |
| } else { |
| link.expect = PROV_RANDOM; |
| } |
| } |
| |
| static void send_input_complete(void) |
| { |
| PROV_BUF(buf, 1); |
| |
| prov_buf_init(&buf, PROV_INPUT_COMPLETE); |
| if (prov_send(&buf, NULL)) { |
| BT_ERR("Failed to send Provisioning Input Complete"); |
| } |
| link.expect = PROV_CONFIRM; |
| } |
| |
| int bt_mesh_input_number(u32_t num) |
| { |
| BT_DBG("%u", num); |
| |
| if (!atomic_test_and_clear_bit(link.flags, WAIT_NUMBER)) { |
| return -EINVAL; |
| } |
| |
| sys_put_be32(num, &link.auth[12]); |
| |
| send_input_complete(); |
| |
| return 0; |
| } |
| |
| int bt_mesh_input_string(const char *str) |
| { |
| BT_DBG("%s", str); |
| |
| if (!atomic_test_and_clear_bit(link.flags, WAIT_STRING)) { |
| return -EINVAL; |
| } |
| |
| strncpy(link.auth, str, prov->input_size); |
| |
| send_input_complete(); |
| |
| return 0; |
| } |
| |
| static void send_pub_key(void) |
| { |
| PROV_BUF(buf, 65); |
| const u8_t *key; |
| |
| key = bt_pub_key_get(); |
| if (!key) { |
| BT_ERR("No public key available"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("Local Public Key: %s", bt_hex(key, 64)); |
| |
| prov_buf_init(&buf, PROV_PUB_KEY); |
| |
| /* Swap X and Y halves independently to big-endian */ |
| sys_memcpy_swap(net_buf_simple_add(&buf, 32), key, 32); |
| sys_memcpy_swap(net_buf_simple_add(&buf, 32), &key[32], 32); |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| /* PublicKeyProvisioner */ |
| memcpy(&link.conf_inputs[17], &buf.data[1], 64); |
| } else { |
| /* PublicKeyRemote */ |
| memcpy(&link.conf_inputs[81], &buf.data[1], 64); |
| } |
| |
| if (prov_send(&buf, NULL)) { |
| BT_ERR("Failed to send Public Key"); |
| return; |
| } |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| link.expect = PROV_PUB_KEY; |
| } else { |
| if (atomic_test_bit(link.flags, WAIT_NUMBER) || |
| atomic_test_bit(link.flags, WAIT_STRING)) { |
| link.expect = PROV_NO_PDU; /* Wait for input */ |
| } else { |
| link.expect = PROV_CONFIRM; |
| } |
| } |
| } |
| |
| static void prov_dh_key_cb(const u8_t dhkey[32]) |
| { |
| BT_DBG("%p", dhkey); |
| |
| if (!dhkey) { |
| BT_ERR("DHKey generation failed"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| sys_memcpy_swap(link.dhkey, dhkey, 32); |
| |
| BT_DBG("DHkey: %s", bt_hex(link.dhkey, 32)); |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| send_confirm(); |
| } else { |
| send_pub_key(); |
| } |
| } |
| |
| static void prov_dh_key_gen(void) |
| { |
| u8_t remote_pk_le[64], *remote_pk; |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| remote_pk = &link.conf_inputs[81]; |
| } else { |
| remote_pk = &link.conf_inputs[17]; |
| } |
| |
| /* Copy remote key in little-endian for bt_dh_key_gen(). |
| * X and Y halves are swapped independently. The bt_dh_key_gen() |
| * will also take care of validating the remote public key. |
| */ |
| sys_memcpy_swap(remote_pk_le, remote_pk, 32); |
| sys_memcpy_swap(&remote_pk_le[32], &remote_pk[32], 32); |
| |
| if (bt_dh_key_gen(remote_pk_le, prov_dh_key_cb)) { |
| BT_ERR("Failed to generate DHKey"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| } |
| } |
| |
| static void prov_pub_key(const u8_t *data) |
| { |
| BT_DBG("Remote Public Key: %s", bt_hex(data, 64)); |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| /* PublicKeyDevice */ |
| memcpy(&link.conf_inputs[81], data, 64); |
| link.bearer->clear_tx(); |
| } else { |
| /* PublicKeyProvisioner */ |
| memcpy(&link.conf_inputs[17], data, 64); |
| |
| if (!bt_pub_key_get()) { |
| /* Clear retransmit timer */ |
| link.bearer->clear_tx(); |
| atomic_set_bit(link.flags, WAIT_PUB_KEY); |
| BT_WARN("Waiting for local public key"); |
| return; |
| } |
| } |
| |
| prov_dh_key_gen(); |
| } |
| |
| static void pub_key_ready(const u8_t *pkey) |
| { |
| if (!pkey) { |
| BT_WARN("Public key not available"); |
| return; |
| } |
| |
| BT_DBG("Local public key ready"); |
| |
| if (atomic_test_and_clear_bit(link.flags, WAIT_PUB_KEY)) { |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| send_pub_key(); |
| } else { |
| prov_dh_key_gen(); |
| } |
| } |
| } |
| |
| static void notify_input_complete(void) |
| { |
| if (atomic_test_and_clear_bit(link.flags, NOTIFY_INPUT_COMPLETE) && |
| prov->input_complete) { |
| prov->input_complete(); |
| } |
| } |
| |
| static void prov_input_complete(const u8_t *data) |
| { |
| BT_DBG(""); |
| notify_input_complete(); |
| } |
| |
| static void send_prov_data(void) |
| { |
| PROV_BUF(pdu, 34); |
| struct bt_mesh_cdb_subnet *sub; |
| u8_t session_key[16]; |
| u8_t nonce[13]; |
| int err; |
| |
| err = bt_mesh_session_key(link.dhkey, link.prov_salt, session_key); |
| if (err) { |
| BT_ERR("Unable to generate session key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("SessionKey: %s", bt_hex(session_key, 16)); |
| |
| err = bt_mesh_prov_nonce(link.dhkey, link.prov_salt, nonce); |
| if (err) { |
| BT_ERR("Unable to generate session nonce"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("Nonce: %s", bt_hex(nonce, 13)); |
| |
| err = bt_mesh_dev_key(link.dhkey, link.prov_salt, |
| link.provisioner->node->dev_key); |
| if (err) { |
| BT_ERR("Unable to generate device key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("DevKey: %s", bt_hex(link.provisioner->node->dev_key, 16)); |
| |
| sub = bt_mesh_cdb_subnet_get(link.provisioner->node->net_idx); |
| if (sub == NULL) { |
| BT_ERR("No subnet with net_idx %u", |
| link.provisioner->node->net_idx); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| prov_buf_init(&pdu, PROV_DATA); |
| net_buf_simple_add_mem(&pdu, sub->keys[sub->kr_flag].net_key, 16); |
| net_buf_simple_add_be16(&pdu, link.provisioner->node->net_idx); |
| net_buf_simple_add_u8(&pdu, bt_mesh_cdb_subnet_flags(sub)); |
| net_buf_simple_add_be32(&pdu, bt_mesh_cdb.iv_index); |
| net_buf_simple_add_be16(&pdu, link.provisioner->node->addr); |
| net_buf_simple_add(&pdu, 8); /* For MIC */ |
| |
| BT_DBG("net_idx %u, iv_index 0x%08x, addr 0x%04x", |
| link.provisioner->node->net_idx, bt_mesh.iv_index, |
| link.provisioner->node->addr); |
| |
| err = bt_mesh_prov_encrypt(session_key, nonce, &pdu.data[1], |
| &pdu.data[1]); |
| if (err) { |
| BT_ERR("Unable to encrypt provisioning data"); |
| prov_fail(PROV_ERR_DECRYPT); |
| return; |
| } |
| |
| if (prov_send(&pdu, NULL)) { |
| BT_ERR("Failed to send Provisioning Data"); |
| return; |
| } |
| |
| link.expect = PROV_COMPLETE; |
| } |
| |
| static void prov_complete(const u8_t *data) |
| { |
| if (!IS_ENABLED(CONFIG_BT_MESH_PROVISIONER)) { |
| return; |
| } |
| |
| struct bt_mesh_cdb_node *node = link.provisioner->node; |
| |
| BT_DBG("key %s, net_idx %u, num_elem %u, addr 0x%04x", |
| bt_hex(node->dev_key, 16), node->net_idx, node->num_elem, |
| node->addr); |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| bt_mesh_store_cdb_node(node); |
| } |
| |
| link.provisioner->node = NULL; |
| prov_link_close(PROV_BEARER_LINK_STATUS_SUCCESS); |
| |
| if (prov->node_added) { |
| prov->node_added(node->net_idx, node->uuid, node->addr, |
| node->num_elem); |
| } |
| } |
| |
| static void send_random(void) |
| { |
| PROV_BUF(rnd, 17); |
| |
| prov_buf_init(&rnd, PROV_RANDOM); |
| net_buf_simple_add_mem(&rnd, link.rand, 16); |
| |
| if (prov_send(&rnd, NULL)) { |
| BT_ERR("Failed to send Provisioning Random"); |
| return; |
| } |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| link.expect = PROV_RANDOM; |
| } else { |
| link.expect = PROV_DATA; |
| } |
| } |
| |
| static void prov_random(const u8_t *data) |
| { |
| u8_t conf_verify[16]; |
| const u8_t *prov_rand, *dev_rand; |
| |
| BT_DBG("Remote Random: %s", bt_hex(data, 16)); |
| |
| if (bt_mesh_prov_conf(link.conf_key, data, link.auth, conf_verify)) { |
| BT_ERR("Unable to calculate confirmation verification"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| if (memcmp(conf_verify, link.conf, 16)) { |
| BT_ERR("Invalid confirmation value"); |
| BT_DBG("Received: %s", bt_hex(link.conf, 16)); |
| BT_DBG("Calculated: %s", bt_hex(conf_verify, 16)); |
| prov_fail(PROV_ERR_CFM_FAILED); |
| return; |
| } |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| prov_rand = link.rand; |
| dev_rand = data; |
| } else { |
| prov_rand = data; |
| dev_rand = link.rand; |
| } |
| |
| if (bt_mesh_prov_salt(link.conf_salt, prov_rand, dev_rand, |
| link.prov_salt)) { |
| BT_ERR("Failed to generate provisioning salt"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("ProvisioningSalt: %s", bt_hex(link.prov_salt, 16)); |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PROVISIONER) && |
| atomic_test_bit(link.flags, PROVISIONER)) { |
| send_prov_data(); |
| } else { |
| send_random(); |
| } |
| } |
| |
| static void prov_confirm(const u8_t *data) |
| { |
| BT_DBG("Remote Confirm: %s", bt_hex(data, 16)); |
| |
| memcpy(link.conf, data, 16); |
| |
| notify_input_complete(); |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| send_random(); |
| } else { |
| send_confirm(); |
| } |
| } |
| |
| static inline bool is_pb_gatt(void) |
| { |
| return link.bearer && link.bearer->type == BT_MESH_PROV_GATT; |
| } |
| |
| static void prov_data(const u8_t *data) |
| { |
| PROV_BUF(msg, 1); |
| u8_t session_key[16]; |
| u8_t nonce[13]; |
| u8_t dev_key[16]; |
| u8_t pdu[25]; |
| u8_t flags; |
| u32_t iv_index; |
| u16_t addr; |
| u16_t net_idx; |
| int err; |
| bool identity_enable; |
| |
| BT_DBG(""); |
| |
| err = bt_mesh_session_key(link.dhkey, link.prov_salt, session_key); |
| if (err) { |
| BT_ERR("Unable to generate session key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("SessionKey: %s", bt_hex(session_key, 16)); |
| |
| err = bt_mesh_prov_nonce(link.dhkey, link.prov_salt, nonce); |
| if (err) { |
| BT_ERR("Unable to generate session nonce"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("Nonce: %s", bt_hex(nonce, 13)); |
| |
| err = bt_mesh_prov_decrypt(session_key, nonce, data, pdu); |
| if (err) { |
| BT_ERR("Unable to decrypt provisioning data"); |
| prov_fail(PROV_ERR_DECRYPT); |
| return; |
| } |
| |
| err = bt_mesh_dev_key(link.dhkey, link.prov_salt, dev_key); |
| if (err) { |
| BT_ERR("Unable to generate device key"); |
| prov_fail(PROV_ERR_UNEXP_ERR); |
| return; |
| } |
| |
| BT_DBG("DevKey: %s", bt_hex(dev_key, 16)); |
| |
| net_idx = sys_get_be16(&pdu[16]); |
| flags = pdu[18]; |
| iv_index = sys_get_be32(&pdu[19]); |
| addr = sys_get_be16(&pdu[23]); |
| |
| BT_DBG("net_idx %u iv_index 0x%08x, addr 0x%04x", |
| net_idx, iv_index, addr); |
| |
| prov_buf_init(&msg, PROV_COMPLETE); |
| if (prov_send(&msg, NULL)) { |
| BT_ERR("Failed to send Provisioning Complete"); |
| return; |
| } |
| |
| /* Ignore any further PDUs on this link */ |
| link.expect = PROV_NO_PDU; |
| |
| /* Store info, since bt_mesh_provision() will end up clearing it */ |
| if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY)) { |
| identity_enable = is_pb_gatt(); |
| } else { |
| identity_enable = false; |
| } |
| |
| err = bt_mesh_provision(pdu, net_idx, flags, iv_index, addr, dev_key); |
| if (err) { |
| BT_ERR("Failed to provision (err %d)", err); |
| return; |
| } |
| |
| /* After PB-GATT provisioning we should start advertising |
| * using Node Identity. |
| */ |
| if (IS_ENABLED(CONFIG_BT_MESH_GATT_PROXY) && identity_enable) { |
| bt_mesh_proxy_identity_enable(); |
| } |
| } |
| |
| static void prov_failed(const u8_t *data) |
| { |
| BT_WARN("Error: 0x%02x", data[0]); |
| reset_state(); |
| } |
| |
| static const struct { |
| void (*func)(const u8_t *data); |
| u16_t len; |
| } prov_handlers[] = { |
| { prov_invite, 1 }, |
| { prov_capabilities, 11 }, |
| { prov_start, 5, }, |
| { prov_pub_key, 64 }, |
| { prov_input_complete, 0 }, |
| { prov_confirm, 16 }, |
| { prov_random, 16 }, |
| { prov_data, 33 }, |
| { prov_complete, 0 }, |
| { prov_failed, 1 }, |
| }; |
| |
| static void prov_recv(const struct prov_bearer *bearer, void *cb_data, |
| struct net_buf_simple *buf) |
| { |
| u8_t type = buf->data[0]; |
| |
| BT_DBG("type 0x%02x len %u", type, buf->len); |
| |
| if (type != PROV_FAILED && type != link.expect) { |
| BT_WARN("Unexpected msg 0x%02x != 0x%02x", type, link.expect); |
| prov_fail(PROV_ERR_UNEXP_PDU); |
| return; |
| } |
| |
| if (type >= ARRAY_SIZE(prov_handlers)) { |
| BT_ERR("Unknown provisioning PDU type 0x%02x", type); |
| prov_fail(PROV_ERR_NVAL_PDU); |
| return; |
| } |
| |
| if (1 + prov_handlers[type].len != buf->len) { |
| BT_ERR("Invalid length %u for type 0x%02x", buf->len, type); |
| prov_fail(PROV_ERR_NVAL_FMT); |
| return; |
| } |
| |
| prov_handlers[type].func(&buf->data[1]); |
| } |
| |
| static void prov_link_opened(const struct prov_bearer *bearer, void *cb_data) |
| { |
| atomic_set_bit(link.flags, LINK_ACTIVE); |
| |
| if (prov->link_open) { |
| prov->link_open(bearer->type); |
| } |
| |
| link.bearer = bearer; |
| |
| if (atomic_test_bit(link.flags, PROVISIONER)) { |
| send_invite(); |
| } else { |
| link.expect = PROV_INVITE; |
| } |
| } |
| |
| static void prov_link_closed(const struct prov_bearer *bearer, void *cb_data, |
| enum prov_bearer_link_status reason) |
| { |
| /* Reset state before calling link_close, so a new provisioning |
| * procedure can be started from the callback. |
| */ |
| reset_state(); |
| |
| BT_DBG("%u", reason); |
| |
| if (prov->link_close) { |
| prov->link_close(bearer->type); |
| } |
| } |
| |
| static void prov_bearer_error(const struct prov_bearer *bearer, void *cb_data, |
| u8_t err) |
| { |
| prov_fail(err); |
| } |
| |
| static const struct prov_bearer_cb prov_bearer_cb = { |
| .link_opened = prov_link_opened, |
| .link_closed = prov_link_closed, |
| .error = prov_bearer_error, |
| .recv = prov_recv, |
| }; |
| |
| #if defined(CONFIG_BT_MESH_PB_ADV) |
| int bt_mesh_pb_adv_open(const u8_t uuid[16], u16_t net_idx, u16_t addr, |
| u8_t attention_duration) |
| { |
| int err; |
| |
| if (atomic_test_and_set_bit(link.flags, LINK_ACTIVE)) { |
| return -EBUSY; |
| } |
| |
| struct bt_uuid_128 uuid_repr = { .uuid = { BT_UUID_TYPE_128 } }; |
| |
| memcpy(uuid_repr.val, uuid, 16); |
| BT_DBG("Provisioning %s", bt_uuid_str(&uuid_repr.uuid)); |
| |
| atomic_set_bit(link.flags, PROVISIONER); |
| memcpy(link.provisioner->uuid, uuid, 16); |
| link.provisioner->addr = addr; |
| link.provisioner->net_idx = net_idx; |
| link.provisioner->attention_duration = attention_duration; |
| link.bearer = &pb_adv; |
| |
| err = link.bearer->link_open(link.provisioner->uuid, PROTOCOL_TIMEOUT, |
| &prov_bearer_cb, NULL); |
| if (err) { |
| atomic_clear_bit(link.flags, LINK_ACTIVE); |
| } |
| |
| return err; |
| } |
| #endif |
| |
| const struct bt_mesh_prov *bt_mesh_prov_get(void) |
| { |
| return prov; |
| } |
| |
| bool bt_prov_active(void) |
| { |
| return atomic_test_bit(link.flags, LINK_ACTIVE); |
| } |
| |
| int bt_mesh_prov_init(const struct bt_mesh_prov *prov_info) |
| { |
| if (!prov_info) { |
| BT_ERR("No provisioning context provided"); |
| return -EINVAL; |
| } |
| |
| prov = prov_info; |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV)) { |
| pb_adv_init(); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT)) { |
| pb_gatt_init(); |
| } |
| |
| return reset_state(); |
| } |
| |
| int bt_mesh_prov_enable(bt_mesh_prov_bearer_t bearers) |
| { |
| if (bt_mesh_is_provisioned()) { |
| return -EALREADY; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_DEBUG)) { |
| const struct bt_mesh_prov *prov = bt_mesh_prov_get(); |
| struct bt_uuid_128 uuid = { .uuid = { BT_UUID_TYPE_128 } }; |
| |
| memcpy(uuid.val, prov->uuid, 16); |
| BT_INFO("Device UUID: %s", bt_uuid_str(&uuid.uuid)); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV) && |
| (bearers & BT_MESH_PROV_ADV)) { |
| pb_adv.link_accept(&prov_bearer_cb, NULL); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT) && |
| (bearers & BT_MESH_PROV_GATT)) { |
| pb_gatt.link_accept(&prov_bearer_cb, NULL); |
| } |
| |
| return 0; |
| } |
| |
| int bt_mesh_prov_disable(bt_mesh_prov_bearer_t bearers) |
| { |
| if (bt_mesh_is_provisioned()) { |
| return -EALREADY; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_ADV) && |
| (bearers & BT_MESH_PROV_ADV)) { |
| bt_mesh_beacon_disable(); |
| bt_mesh_scan_disable(); |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_MESH_PB_GATT) && |
| (bearers & BT_MESH_PROV_GATT)) { |
| bt_mesh_proxy_prov_disable(true); |
| } |
| |
| return 0; |
| } |
| |
| void bt_mesh_prov_complete(u16_t net_idx, u16_t addr) |
| { |
| if (prov->complete) { |
| prov->complete(net_idx, addr); |
| } |
| } |
| |
| void bt_mesh_prov_reset(void) |
| { |
| if (prov->reset) { |
| prov->reset(); |
| } |
| } |