| .. _dac80508_evm_shield: |
| |
| DAC80508 Evaluation Module |
| #################################### |
| |
| Overview |
| ******** |
| |
| The Texas Instruments DAC80508 Evaluation Module (EVM) is a |
| DAC development module for the TI DAC80508 series. |
| |
| .. figure:: dac80508evm-board-photo.jpg |
| :align: center |
| :alt: DAC80508 EVM |
| |
| Requirements |
| ************ |
| |
| This shield can only be used with a development board that provides a |
| configuration for Arduino connectors and defines a node alias for the |
| SPI interface (see :ref:`shields` for more details). |
| |
| The SPI connector pins on the DAC80508 EVM can be connected to the |
| Arduino headers of the development board using jumper wires. |
| In addition, 5V must be connected to the DAC80508 EVM's TP6(VDD). |
| |
| .. figure:: dac80508evm_connected.jpg |
| :align: center |
| :alt: DAC80508 EVM + STM32F746G_DISCO |
| |
| For more information about interfacing the DAC80508 series and the |
| DACx0508 EVM in particular, see these TI documents: |
| |
| - `DACx0508 Evaluation Module User's Guide`_ |
| - `DAC80508 True 16-bit, 8-channel, SPI`_ |
| |
| .. _DACx0508 Evaluation Module User's Guide: |
| https://www.ti.com/lit/pdf/slau734 |
| |
| .. _DAC80508 True 16-bit, 8-channel, SPI: |
| https://www.ti.com/product/DAC80508 |