drivers/wifi/simplelink/simplelink_support.c

/*
 * Copyright (c) 2018, Texas Instruments Incorporated
 *
 * SPDX-License-Identifier: Apache-2.0
 *
 */

#include <stdlib.h>
#include <string.h>

#include "simplelink_log.h"
LOG_MODULE_DECLARE(LOG_MODULE_NAME);

#include <zephyr/kernel.h>
#include <stdint.h>

#include <ti/drivers/net/wifi/simplelink.h>
#include <ti/net/slnetif.h>
#include <ti/net/slnetutils.h>
#include <ti/drivers/net/wifi/slnetifwifi.h>
#include <CC3220SF_LAUNCHXL.h>

#include "simplelink_support.h"

#define SET_STATUS_BIT(status, bit) {status |= (1 << (bit)); }
#define CLR_STATUS_BIT(status, bit) {status &= ~(1 << (bit)); }
#define GET_STATUS_BIT(status, bit) (0 != (status & (1 << (bit))))

#define SL_STOP_TIMEOUT	 (200)

#undef ASSERT_ON_ERROR
#define ASSERT_ON_ERROR(ret, e) __ASSERT(ret >= 0, e)
#define DEVICE_ERROR	 "See \"DEVICE ERRORS CODES\" in SimpleLink errors.h"
#define WLAN_ERROR	 "See \"WLAN ERRORS CODES\" in SimpleLink errors.h"
#define NETAPP_ERROR	 "See \"NETAPP ERRORS CODES\" in SimpleLink errors.h"

#define CHANNEL_MASK_ALL	    (0x1FFF)
#define RSSI_TH_MAX		    (-95)

#define SLNET_IF_WIFI_PRIO                    (5)
#define SLNET_IF_WIFI_NAME                    "CC32xx"

enum status_bits {
	/* Network Processor is powered up */
	STATUS_BIT_NWP_INIT = 0,
	/* The device is connected to the AP */
	STATUS_BIT_CONNECTION,
	/* The device has leased IP to any connected client */
	STATUS_BIT_IP_LEASED,
	/* The device has acquired an IP */
	STATUS_BIT_IP_ACQUIRED,
	/* The device has acquired an IPv6 address */
	STATUS_BIT_IPV6_ACQUIRED,
};

struct nwp_status {
	/* Callback to notify net & wifi mgmt events from SL Event Handlers */
	simplelink_wifi_cb_t cb;

	/* Status Variables */
	uint32_t status;	/* The state of the NWP */
	uint32_t role;	/* The device's role (STA, P2P or AP) */

	/* Scan results table: */
	SlWlanNetworkEntry_t net_entries[CONFIG_WIFI_SIMPLELINK_SCAN_COUNT];
};

/* STA/AP mode state: shared with simplelink.c */
struct sl_connect_state sl_conn;

/* Network Coprocessor state, including role and connection state: */
static struct nwp_status nwp;

/* Minimal configuration of SlNetIfWifi for Zephyr */
static SlNetIf_Config_t slnetifwifi_config_zephyr = {
	.sockCreate = SlNetIfWifi_socket,
	.sockClose = SlNetIfWifi_close,
	.sockSelect = SlNetIfWifi_select,
	.sockSetOpt = SlNetIfWifi_setSockOpt,
	.sockGetOpt = SlNetIfWifi_getSockOpt,
	.sockRecvFrom = SlNetIfWifi_recvFrom,
	.sockSendTo = SlNetIfWifi_sendTo,
	.utilGetHostByName = SlNetIfWifi_getHostByName,
	.ifGetIPAddr = SlNetIfWifi_getIPAddr,
	.ifGetConnectionStatus = SlNetIfWifi_getConnectionStatus
};

/* Configure the device to a default state, resetting previous parameters .*/
static int32_t configure_simplelink(void)
{
	int32_t retval = -1;
	int32_t mode = -1;
	uint32_t if_bitmap = 0U;
	SlWlanScanParamCommand_t scan_default = { 0 };
	SlWlanRxFilterOperationCommandBuff_t rx_filterid_mask = { { 0 } };
	uint8_t config_opt;
	uint8_t power;

#if defined(CONFIG_NET_IPV4) && defined(CONFIG_NET_CONFIG_MY_IPV4_ADDR)
	struct in_addr addr4;
	SlNetCfgIpV4Args_t ipV4;

	memset(&ipV4, 0, sizeof(ipV4));
#endif

	/* Turn on NWP */
	mode = sl_Start(0, 0, 0);
	ASSERT_ON_ERROR(mode, DEVICE_ERROR);

	if (mode != ROLE_STA) {
		/* Set NWP role as STA */
		mode = sl_WlanSetMode(ROLE_STA);
		ASSERT_ON_ERROR(mode, WLAN_ERROR);

		/* For changes to take affect, we restart the NWP */
		retval = sl_Stop(SL_STOP_TIMEOUT);
		ASSERT_ON_ERROR(retval, DEVICE_ERROR);

		mode = sl_Start(0, 0, 0);
		ASSERT_ON_ERROR(mode, DEVICE_ERROR);
	}

	if (mode != ROLE_STA) {
		LOG_ERR("Failed to configure NWP to default state");
		return -1;
	}

	/* Use Fast Connect Policy, to automatically connect to last AP: */
	retval = sl_WlanPolicySet(SL_WLAN_POLICY_CONNECTION,
				  SL_WLAN_CONNECTION_POLICY(1, 1, 0, 0),
				  NULL, 0);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* Disable Auto Provisioning*/
	retval = sl_WlanProvisioning(SL_WLAN_PROVISIONING_CMD_STOP, 0xFF, 0,
				     NULL, 0x0);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* Delete existing profiles */
	retval = sl_WlanProfileDel(0xFF);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

#if defined(CONFIG_NET_IPV4) && defined(CONFIG_NET_CONFIG_MY_IPV4_ADDR)
	if (net_addr_pton(AF_INET, CONFIG_NET_CONFIG_MY_IPV4_ADDR, &addr4)
			< 0) {
		LOG_ERR("Invalid CONFIG_NET_CONFIG_MY_IPV4_ADDR");
		return -1;
	}
	ipV4.Ip = (_u32)SL_IPV4_VAL(addr4.s4_addr[0],
				    addr4.s4_addr[1],
				    addr4.s4_addr[2],
				    addr4.s4_addr[3]);

#if defined(CONFIG_NET_CONFIG_MY_IPV4_GW)
	if (strcmp(CONFIG_NET_CONFIG_MY_IPV4_GW, "") != 0) {
		if (net_addr_pton(AF_INET, CONFIG_NET_CONFIG_MY_IPV4_GW,
				  &addr4) < 0) {
			LOG_ERR("Invalid CONFIG_NET_CONFIG_MY_IPV4_GW");
			return -1;
		}
		ipV4.IpGateway = (_u32)SL_IPV4_VAL(addr4.s4_addr[0],
						   addr4.s4_addr[1],
						   addr4.s4_addr[2],
						   addr4.s4_addr[3]);
	}
#endif

#if defined(CONFIG_NET_CONFIG_MY_IPV4_NETMASK)
	if (strcmp(CONFIG_NET_CONFIG_MY_IPV4_NETMASK, "") != 0) {
		if (net_addr_pton(AF_INET, CONFIG_NET_CONFIG_MY_IPV4_NETMASK,
				  &addr4) < 0) {
			LOG_ERR("Invalid CONFIG_NET_CONFIG_MY_IPV4_NETMASK");
			return -1;
		}
		ipV4.IpMask = (_u32)SL_IPV4_VAL(addr4.s4_addr[0],
						addr4.s4_addr[1],
						addr4.s4_addr[2],
						addr4.s4_addr[3]);
	}
#endif

	retval = sl_NetCfgSet(SL_NETCFG_IPV4_STA_ADDR_MODE,
			      SL_NETCFG_ADDR_STATIC,
			      sizeof(SlNetCfgIpV4Args_t), (_u8 *)&ipV4);
	ASSERT_ON_ERROR(retval, NETAPP_ERROR);
#else
	/* enable DHCP client */
	retval = sl_NetCfgSet(SL_NETCFG_IPV4_STA_ADDR_MODE,
			      SL_NETCFG_ADDR_DHCP, 0, 0);
	ASSERT_ON_ERROR(retval, NETAPP_ERROR);
#endif

#if defined(CONFIG_NET_IPV6)
	if_bitmap = ~0;
#else
	/* Disable ipv6 */
	if_bitmap = !(SL_NETCFG_IF_IPV6_STA_LOCAL |
		      SL_NETCFG_IF_IPV6_STA_GLOBAL);
#endif
	retval = sl_NetCfgSet(SL_NETCFG_IF, SL_NETCFG_IF_STATE,
			      sizeof(if_bitmap),
			      (const unsigned char *)&if_bitmap);
	ASSERT_ON_ERROR(retval, NETAPP_ERROR);

	/* Configure scan parameters to default */
	scan_default.ChannelsMask = CHANNEL_MASK_ALL;
	scan_default.RssiThreshold = RSSI_TH_MAX;

	retval = sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID,
			    SL_WLAN_GENERAL_PARAM_OPT_SCAN_PARAMS,
			    sizeof(scan_default), (uint8_t *)&scan_default);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* Disable scans: In other words, use "one-shot" scanning */
	config_opt = SL_WLAN_SCAN_POLICY(0, 0);
	retval = sl_WlanPolicySet(SL_WLAN_POLICY_SCAN, config_opt, NULL, 0);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* Set TX power lvl to max */
	power = 0U;
	retval = sl_WlanSet(SL_WLAN_CFG_GENERAL_PARAM_ID,
			    SL_WLAN_GENERAL_PARAM_OPT_STA_TX_POWER, 1,
			    (uint8_t *)&power);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* Set NWP Power policy to 'normal' */
	retval = sl_WlanPolicySet(SL_WLAN_POLICY_PM, SL_WLAN_NORMAL_POLICY,
				  NULL, 0);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* Unregister mDNS services */
	retval = sl_NetAppMDNSUnRegisterService(0, 0, 0);
	ASSERT_ON_ERROR(retval, NETAPP_ERROR);

	/* Remove all 64 RX filters (8*8) */
	(void)memset(rx_filterid_mask.FilterBitmap, 0xFF, 8);

	retval = sl_WlanSet(SL_WLAN_RX_FILTERS_ID, SL_WLAN_RX_FILTER_REMOVE,
			    sizeof(SlWlanRxFilterOperationCommandBuff_t),
			    (uint8_t *)&rx_filterid_mask);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* Set NWP role as STA */
	retval = sl_WlanSetMode(ROLE_STA);
	ASSERT_ON_ERROR(retval, WLAN_ERROR);

	/* For changes to take affect, we restart the NWP */
	retval = sl_Stop(0xFF);
	ASSERT_ON_ERROR(retval, DEVICE_ERROR);

	mode = sl_Start(0, 0, 0);
	ASSERT_ON_ERROR(mode, DEVICE_ERROR);

	if (mode != ROLE_STA) {
		LOG_ERR("Failed to configure device to it's default state");
		retval = -1;
	} else {
		nwp.role = ROLE_STA;
		SET_STATUS_BIT(nwp.status, STATUS_BIT_NWP_INIT);
		retval = 0;
	}

	return retval;
}

/**
 *  @brief SimpleLinkWlanEventHandler
 *
 *  This handler gets called whenever a WLAN event is reported
 *  by the host driver / NWP.
 *
 *  @note See the CC3120/CC3220 NWP programmer's guide (SWRU455)
 *	  sections 4.3.4, 4.4.5 and 4.5.5.
 */
void SimpleLinkWlanEventHandler(SlWlanEvent_t *wlan_event)
{
	SlWlanEventDisconnect_t	 *event_data = NULL;

	if (!wlan_event) {
		return;
	}

	switch (wlan_event->Id) {
	case SL_WLAN_EVENT_CONNECT:
		SET_STATUS_BIT(nwp.status, STATUS_BIT_CONNECTION);

		/* Store new connection SSID and BSSID: */
		memcpy(sl_conn.ssid, wlan_event->Data.Connect.SsidName,
		       wlan_event->Data.Connect.SsidLen);
		memcpy(sl_conn.bssid, wlan_event->Data.Connect.Bssid,
		       BSSID_LEN_MAX);

		LOG_INF("[WLAN EVENT] STA Connected to the AP: %s, "
			"BSSID: %x:%x:%x:%x:%x:%x",
			sl_conn.ssid, sl_conn.bssid[0],
			sl_conn.bssid[1], sl_conn.bssid[2],
			sl_conn.bssid[3], sl_conn.bssid[4],
			sl_conn.bssid[5]);

		/* Continue the notification callback chain... */
		sl_conn.error = 0;
		nwp.cb(SL_WLAN_EVENT_CONNECT, &sl_conn);
		break;

	case SL_WLAN_EVENT_DISCONNECT:
		CLR_STATUS_BIT(nwp.status, STATUS_BIT_CONNECTION);
		CLR_STATUS_BIT(nwp.status, STATUS_BIT_IP_ACQUIRED);
		CLR_STATUS_BIT(nwp.status, STATUS_BIT_IPV6_ACQUIRED);

		event_data = &wlan_event->Data.Disconnect;

		/* If the user has initiated 'Disconnect' request,
		 * 'reason_code' is SL_WLAN_DISCONNECT_USER_INITIATED
		 */
		if (SL_WLAN_DISCONNECT_USER_INITIATED ==
		    event_data->ReasonCode) {
			LOG_INF("[WLAN EVENT] "
				"Device disconnected from the AP: %s",
				event_data->SsidName);
			LOG_INF("BSSID: %x:%x:%x:%x:%x:%x on application's"
				" request", event_data->Bssid[0],
				event_data->Bssid[1], event_data->Bssid[2],
				event_data->Bssid[3], event_data->Bssid[4],
				event_data->Bssid[5]);
			sl_conn.error = 0;
		} else {
			LOG_ERR("[WLAN ERROR] "
				"Device disconnected from the AP: %s",
				event_data->SsidName);
			LOG_ERR("BSSID: %x:%x:%x:%x:%x:%x on error: %d",
				event_data->Bssid[0],
				event_data->Bssid[1], event_data->Bssid[2],
				event_data->Bssid[3], event_data->Bssid[4],
				event_data->Bssid[5],
				event_data->ReasonCode);
			sl_conn.error = event_data->ReasonCode;
		}

		(void)memset(&(sl_conn.ssid), 0x0, sizeof(sl_conn.ssid));
		(void)memset(&(sl_conn.bssid), 0x0, sizeof(sl_conn.bssid));

		/* Continue the notification callback chain... */
		nwp.cb(SL_WLAN_EVENT_DISCONNECT, &sl_conn);
		break;

	case SL_WLAN_EVENT_STA_ADDED:
		memcpy(&(sl_conn.bssid), wlan_event->Data.STAAdded.Mac,
		       SL_WLAN_BSSID_LENGTH);
		LOG_INF("[WLAN EVENT] STA was added to AP: "
			"BSSID: %x:%x:%x:%x:%x:%x",
			sl_conn.bssid[0], sl_conn.bssid[1],
			sl_conn.bssid[2], sl_conn.bssid[3],
			sl_conn.bssid[4], sl_conn.bssid[5]);
		break;
	case SL_WLAN_EVENT_STA_REMOVED:
		memcpy(&(sl_conn.bssid), wlan_event->Data.STAAdded.Mac,
		       SL_WLAN_BSSID_LENGTH);
		LOG_INF("[WLAN EVENT] STA was removed from AP: "
			"BSSID: %x:%x:%x:%x:%x:%x",
			sl_conn.bssid[0], sl_conn.bssid[1],
			sl_conn.bssid[2], sl_conn.bssid[3],
			sl_conn.bssid[4], sl_conn.bssid[5]);

		(void)memset(&(sl_conn.bssid), 0x0, sizeof(sl_conn.bssid));
		break;
	default:
		LOG_ERR("[WLAN EVENT] Unexpected event [0x%lx]",
			wlan_event->Id);
		break;
	}
}

/**
 *  @brief SimpleLinkNetAppEventHandler
 *
 *  This handler gets called whenever a Netapp event is reported
 *  by the host driver / NWP.
 *
 *  @note See the CC3120/CC3220 NWP programmer's guide (SWRU455)
 *	  section 5.7.
 */
void SimpleLinkNetAppEventHandler(SlNetAppEvent_t *netapp_event)
{
	SlIpV4AcquiredAsync_t *event_data = NULL;
	uint32_t i;

	if (!netapp_event) {
		return;
	}

	switch (netapp_event->Id) {
	case SL_NETAPP_EVENT_IPV4_ACQUIRED:
		SET_STATUS_BIT(nwp.status, STATUS_BIT_IP_ACQUIRED);

		/* Ip Acquired Event Data */
		event_data = &netapp_event->Data.IpAcquiredV4;
		sl_conn.ip_addr = event_data->Ip;

		/* Gateway IP address */
		sl_conn.gateway_ip = event_data->Gateway;

		LOG_INF("[NETAPP EVENT] IP set to: IPv4=%d.%d.%d.%d, "
			"Gateway=%d.%d.%d.%d",
			SL_IPV4_BYTE(sl_conn.ip_addr, 3),
			SL_IPV4_BYTE(sl_conn.ip_addr, 2),
			SL_IPV4_BYTE(sl_conn.ip_addr, 1),
			SL_IPV4_BYTE(sl_conn.ip_addr, 0),

			SL_IPV4_BYTE(sl_conn.gateway_ip, 3),
			SL_IPV4_BYTE(sl_conn.gateway_ip, 2),
			SL_IPV4_BYTE(sl_conn.gateway_ip, 1),
			SL_IPV4_BYTE(sl_conn.gateway_ip, 0));

		nwp.cb(SIMPLELINK_WIFI_CB_IPACQUIRED, &sl_conn);
		break;

	case SL_NETAPP_EVENT_IPV6_ACQUIRED:
		SET_STATUS_BIT(nwp.status, STATUS_BIT_IPV6_ACQUIRED);

		for (i = 0U; i < 4; i++) {
			sl_conn.ipv6_addr[i] =
			  netapp_event->Data.IpAcquiredV6.Ip[i];
		}

		if (LOG_LEVEL >= LOG_LEVEL_INF) {
			LOG_INF("[NETAPP EVENT] IP Acquired: "
				"IPv6=%04x:%04x:%04x:%04x:%04x:%04x:%04x:%04x",
				((sl_conn.ipv6_addr[0] >> 16) & 0xffff),
				sl_conn.ipv6_addr[0] & 0xffff,
				((sl_conn.ipv6_addr[1] >> 16) & 0xffff),
				sl_conn.ipv6_addr[1] & 0xffff,
				((sl_conn.ipv6_addr[2] >> 16) & 0xffff),
				sl_conn.ipv6_addr[2] & 0xffff,
				((sl_conn.ipv6_addr[3] >> 16) & 0xffff),
				sl_conn.ipv6_addr[3] & 0xffff);

		}

		nwp.cb(SIMPLELINK_WIFI_CB_IPV6ACQUIRED, &sl_conn);
		break;

	case SL_DEVICE_EVENT_DROPPED_NETAPP_IP_LEASED:
		SET_STATUS_BIT(nwp.status, STATUS_BIT_IP_LEASED);
		SET_STATUS_BIT(nwp.status, STATUS_BIT_IP_ACQUIRED);

		sl_conn.sta_ip = netapp_event->Data.IpLeased.IpAddress;
		LOG_INF("[NETAPP EVENT] IP Leased to Client: "
			"IP=%d.%d.%d.%d",
			SL_IPV4_BYTE(sl_conn.sta_ip, 3),
			SL_IPV4_BYTE(sl_conn.sta_ip, 2),
			SL_IPV4_BYTE(sl_conn.sta_ip, 1),
			SL_IPV4_BYTE(sl_conn.sta_ip, 0));

		break;

	case SL_DEVICE_EVENT_DROPPED_NETAPP_IP_RELEASED:
		LOG_INF("[NETAPP EVENT] IP is released.");
		break;

	default:
		LOG_ERR("[NETAPP EVENT] Unexpected event [0x%lx]",
			netapp_event->Id);
		break;
	}

	if ((netapp_event->Id == SL_NETAPP_EVENT_IPV4_ACQUIRED) ||
		(netapp_event->Id == SL_NETAPP_EVENT_IPV6_ACQUIRED)) {
		/* Initialize SlNetSock layer for getaddrinfo */
		SlNetIf_init(0);
		/*
		 * We are only using SlNetSock to support getaddrinfo()
		 * for the WiFi interface, so hardcoding the interface
		 * id to 1 here.
		 */
		SlNetIf_add(SLNETIF_ID_1, SLNET_IF_WIFI_NAME,
			(const SlNetIf_Config_t *)&slnetifwifi_config_zephyr,
			SLNET_IF_WIFI_PRIO);

		SlNetSock_init(0);
		SlNetUtil_init(0);
	}
}

/**
 *  @brief SimpleLinkGeneralEventHandler
 *
 *  This handler gets called whenever a general error is reported
 *  by the NWP / Host driver. Since these errors are not fatal,
 *  the application can handle them.
 *
 *  @note See the CC3120/CC3220 NWP programmer's guide (SWRU455)
 *	  section 17.9.
 */
void SimpleLinkGeneralEventHandler(SlDeviceEvent_t *dev_event)
{
	if (!dev_event) {
		return;
	}

	LOG_INF("[GENERAL EVENT] - ID=[%d] Sender=[%d]",
		dev_event->Data.Error.Code,
		dev_event->Data.Error.Source);
}

/**
 *  @brief SimpleLinkFatalErrorEventHandler
 *
 *  This handler gets called whenever a driver error occurs requiring
 *  restart of the device in order to recover.
 */
void SimpleLinkFatalErrorEventHandler(SlDeviceFatal_t *fatal_err_event)
{

	switch (fatal_err_event->Id) {
	case SL_DEVICE_EVENT_FATAL_DEVICE_ABORT:
		LOG_ERR("[ERROR] - FATAL ERROR: "
			"Abort NWP event detected: "
			"AbortType=%ld, AbortData=0x%lx",
			fatal_err_event->Data.DeviceAssert.Code,
			fatal_err_event->Data.DeviceAssert.Value);
		break;

	case SL_DEVICE_EVENT_FATAL_DRIVER_ABORT:
		LOG_ERR("[ERROR] - FATAL ERROR: Driver Abort detected.");
		break;

	case SL_DEVICE_EVENT_FATAL_NO_CMD_ACK:
		LOG_ERR("[ERROR] - FATAL ERROR: No Cmd Ack detected "
			"[cmd opcode = 0x%lx]",
			fatal_err_event->Data.NoCmdAck.Code);
		break;

	case SL_DEVICE_EVENT_FATAL_SYNC_LOSS:
		LOG_ERR("[ERROR] - FATAL ERROR: Sync loss detected");
		break;

	case SL_DEVICE_EVENT_FATAL_CMD_TIMEOUT:
		LOG_ERR("[ERROR] - FATAL ERROR: "
			"Async event timeout detected "
			"[event opcode =0x%lx]",
			fatal_err_event->Data.CmdTimeout.Code);
		break;

	default:
		LOG_ERR("[ERROR] - FATAL ERROR: "
			"Unspecified error detected");
		break;
	}
}

/* Unused, but must be defined to link.	 */
void SimpleLinkSockEventHandler(SlSockEvent_t *psock)
{
	ARG_UNUSED(psock);
}

/* Unused, but must be defined to link.	 */
void SimpleLinkHttpServerEventHandler(SlNetAppHttpServerEvent_t *http_event,
				      SlNetAppHttpServerResponse_t *http_resp)
{
	ARG_UNUSED(http_event);
	ARG_UNUSED(http_resp);
}


/* Unused, but must be defined to link.	 */
void SimpleLinkNetAppRequestEventHandler(SlNetAppRequest_t *netapp_request,
					 SlNetAppResponse_t *netapp_response)
{
	ARG_UNUSED(netapp_request);
	ARG_UNUSED(netapp_response);
}

/* Unused, but must be defined to link.	 */
void SimpleLinkNetAppRequestMemFreeEventHandler(uint8_t *buffer)
{
	ARG_UNUSED(buffer);
}

/* Note: SimpleLink WiFi scan also can return the following:
 * - BSSID
 * - Whether network hidden or visible
 * - Other types of security
 */
void z_simplelink_get_scan_result(int index,
				 struct wifi_scan_result *scan_result)
{
	SlWlanNetworkEntry_t *net_entry;
	int sec_bmp;

	__ASSERT_NO_MSG(index <= CONFIG_WIFI_SIMPLELINK_SCAN_COUNT);
	net_entry = &nwp.net_entries[index];

	(void)memset(scan_result, 0x0, sizeof(struct wifi_scan_result));

	__ASSERT_NO_MSG(net_entry->SsidLen <= WIFI_SSID_MAX_LEN);
	memcpy(scan_result->ssid, net_entry->Ssid, net_entry->SsidLen);
	scan_result->ssid_length = net_entry->SsidLen;
	scan_result->channel = net_entry->Channel;

	/* Parse security bitmap: */
	sec_bmp = net_entry->SecurityInfo;
	if (SL_WLAN_SCAN_RESULT_SEC_TYPE_BITMAP(sec_bmp) & 0x6) {
		scan_result->security = WIFI_SECURITY_TYPE_PSK;
	} else {
		scan_result->security = WIFI_SECURITY_TYPE_NONE;
	}

	scan_result->rssi = net_entry->Rssi;
}

int z_simplelink_start_scan(void)
{
	int32_t ret;

	/* Clear the results buffer */
	(void)memset(&nwp.net_entries, 0x0, sizeof(nwp.net_entries));

	/* Attempt to get scan results from NWP
	 * Note: If scan policy isn't set, invoking 'sl_WlanGetNetworkList()'
	 * for the first time triggers 'one shot' scan.
	 */
	ret = sl_WlanGetNetworkList(0, CONFIG_WIFI_SIMPLELINK_SCAN_COUNT,
				    &nwp.net_entries[0]);
	LOG_DBG("sl_WlanGetNetworkList: %d", ret);

	return ret;
}

void z_simplelink_get_mac(unsigned char *mac)
{
	uint16_t mac_len = SL_MAC_ADDR_LEN;
	uint16_t config_opt = 0U;

	sl_NetCfgGet(SL_NETCFG_MAC_ADDRESS_GET, &config_opt,
		     &mac_len, (uint8_t *)mac);
}

int z_simplelink_connect(struct wifi_connect_req_params *params)
{
	SlWlanSecParams_t secParams = { 0 };
	long lretval;

	if (params->security == WIFI_SECURITY_TYPE_PSK) {
		secParams.Key = (signed char *)params->psk;
		secParams.KeyLen = params->psk_length;
		/* This is only mapping handled for now: */
		secParams.Type = SL_WLAN_SEC_TYPE_WPA_WPA2;
	} else {
		secParams.Key = (signed char *)NULL;
		secParams.KeyLen = 0;
		secParams.Type = SL_WLAN_SEC_TYPE_OPEN;
	}

	lretval = sl_WlanConnect((signed char *)params->ssid,
				 params->ssid_length, 0, &secParams, 0);
	LOG_DBG("sl_WlanConnect: %ld", lretval);

	return lretval;
}

int z_simplelink_disconnect(void)
{
	long lretval;

	lretval = sl_WlanDisconnect();
	LOG_DBG("sl_WlanDisconnect: %ld", lretval);

	return lretval;
}

int z_simplelink_init(simplelink_wifi_cb_t wifi_cb)
{
	int retval;

	__ASSERT(wifi_cb, "callback must be supplied");

	/* Init the board: */
	CC3220SF_LAUNCHXL_init();

	/* Configure SimpleLink NWP: */
	nwp.status = 0U;
	nwp.role = ROLE_RESERVED;
	nwp.cb = wifi_cb;

	(void)memset(&sl_conn, 0x0, sizeof(sl_conn));

	retval = configure_simplelink();
	__ASSERT(retval >= 0, "Unable to configure SimpleLink");

	return retval;
}