blob: 7428cdf112d35e5ce1c40f4c15b37deb2c0a4b28 [file] [log] [blame]
/*
* Copyright (c) 2010-2014 Wind River Systems, Inc.
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief IA-32 specific kernel interface header
* This header contains the IA-32 specific kernel interface. It is included
* by the generic kernel interface header (include/arch/cpu.h)
*/
#ifndef _ARCH_IFACE_H
#define _ARCH_IFACE_H
#include <irq.h>
#include <arch/x86/irq_controller.h>
#include <kernel_arch_thread.h>
#include <generated_dts_board.h>
#include <mmustructs.h>
#ifndef _ASMLANGUAGE
#include <arch/x86/asm_inline.h>
#include <arch/x86/addr_types.h>
#include <arch/x86/segmentation.h>
#endif
#ifdef __cplusplus
extern "C" {
#endif
/* APIs need to support non-byte addressable architectures */
#define OCTET_TO_SIZEOFUNIT(X) (X)
#define SIZEOFUNIT_TO_OCTET(X) (X)
/* GDT layout */
#define CODE_SEG 0x08
#define DATA_SEG 0x10
#define MAIN_TSS 0x18
#define DF_TSS 0x20
#define USER_CODE_SEG 0x2b /* at dpl=3 */
#define USER_DATA_SEG 0x33 /* at dpl=3 */
/**
* Macro used internally by NANO_CPU_INT_REGISTER and NANO_CPU_INT_REGISTER_ASM.
* Not meant to be used explicitly by platform, driver or application code.
*/
#define MK_ISR_NAME(x) __isr__##x
#ifndef _ASMLANGUAGE
#ifdef CONFIG_INT_LATENCY_BENCHMARK
void _int_latency_start(void);
void _int_latency_stop(void);
#else
#define _int_latency_start() do { } while (0)
#define _int_latency_stop() do { } while (0)
#endif
/* interrupt/exception/error related definitions */
/*
* The TCS must be aligned to the same boundary as that used by the floating
* point register set. This applies even for threads that don't initially
* use floating point, since it is possible to enable floating point support
* later on.
*/
#define STACK_ALIGN FP_REG_SET_ALIGN
typedef struct s_isrList {
/** Address of ISR/stub */
void *fnc;
/** IRQ associated with the ISR/stub, or -1 if this is not
* associated with a real interrupt; in this case vec must
* not be -1
*/
unsigned int irq;
/** Priority associated with the IRQ. Ignored if vec is not -1 */
unsigned int priority;
/** Vector number associated with ISR/stub, or -1 to assign based
* on priority
*/
unsigned int vec;
/** Privilege level associated with ISR/stub */
unsigned int dpl;
/** If nonzero, specifies a TSS segment selector. Will configure
* a task gate instead of an interrupt gate. fnc parameter will be
* ignored
*/
unsigned int tss;
} ISR_LIST;
/**
* @brief Connect a routine to an interrupt vector
*
* This macro "connects" the specified routine, @a r, to the specified interrupt
* vector, @a v using the descriptor privilege level @a d. On the IA-32
* architecture, an interrupt vector is a value from 0 to 255. This macro
* populates the special intList section with the address of the routine, the
* vector number and the descriptor privilege level. The genIdt tool then picks
* up this information and generates an actual IDT entry with this information
* properly encoded.
*
* The @a d argument specifies the privilege level for the interrupt-gate
* descriptor; (hardware) interrupts and exceptions should specify a level of 0,
* whereas handlers for user-mode software generated interrupts should specify 3.
* @param r Routine to be connected
* @param n IRQ number
* @param p IRQ priority
* @param v Interrupt Vector
* @param d Descriptor Privilege Level
*
* @return N/A
*
*/
#define NANO_CPU_INT_REGISTER(r, n, p, v, d) \
static ISR_LIST __attribute__((section(".intList"))) \
__attribute__((used)) MK_ISR_NAME(r) = \
{ \
.fnc = &(r), \
.irq = (n), \
.priority = (p), \
.vec = (v), \
.dpl = (d), \
.tss = 0 \
}
/**
* @brief Connect an IA hardware task to an interrupt vector
*
* This is very similar to NANO_CPU_INT_REGISTER but instead of connecting
* a handler function, the interrupt will induce an IA hardware task
* switch to another hardware task instead.
*
* @param tss_p GDT/LDT segment selector for the TSS representing the task
* @param irq_p IRQ number
* @param priority_p IRQ priority
* @param vec_p Interrupt vector
* @param dpl_p Descriptor privilege level
*/
#define _X86_IDT_TSS_REGISTER(tss_p, irq_p, priority_p, vec_p, dpl_p) \
static ISR_LIST __attribute__((section(".intList"))) \
__attribute__((used)) MK_ISR_NAME(r) = \
{ \
.fnc = NULL, \
.irq = (irq_p), \
.priority = (priority_p), \
.vec = (vec_p), \
.dpl = (dpl_p), \
.tss = (tss_p) \
}
/**
* Code snippets for populating the vector ID and priority into the intList
*
* The 'magic' of static interrupts is accomplished by building up an array
* 'intList' at compile time, and the gen_idt tool uses this to create the
* actual IDT data structure.
*
* For controllers like APIC, the vectors in the IDT are not normally assigned
* at build time; instead the sentinel value -1 is saved, and gen_idt figures
* out the right vector to use based on our priority scheme. Groups of 16
* vectors starting at 32 correspond to each priority level.
*
* On MVIC, the mapping is fixed; the vector to use is just the irq line
* number plus 0x20. The priority argument supplied by the user is discarded.
*
* These macros are only intended to be used by IRQ_CONNECT() macro.
*/
#if CONFIG_X86_FIXED_IRQ_MAPPING
#define _VECTOR_ARG(irq_p) _IRQ_CONTROLLER_VECTOR_MAPPING(irq_p)
#else
#define _VECTOR_ARG(irq_p) (-1)
#endif /* CONFIG_X86_FIXED_IRQ_MAPPING */
/**
* Configure a static interrupt.
*
* All arguments must be computable by the compiler at build time.
*
* Internally this function does a few things:
*
* 1. There is a declaration of the interrupt parameters in the .intList
* section, used by gen_idt to create the IDT. This does the same thing
* as the NANO_CPU_INT_REGISTER() macro, but is done in assembly as we
* need to populate the .fnc member with the address of the assembly
* IRQ stub that we generate immediately afterwards.
*
* 2. The IRQ stub itself is declared. The code will go in its own named
* section .text.irqstubs section (which eventually gets linked into 'text')
* and the stub shall be named (isr_name)_irq(irq_line)_stub
*
* 3. The IRQ stub pushes the ISR routine and its argument onto the stack
* and then jumps to the common interrupt handling code in _interrupt_enter().
*
* 4. _irq_controller_irq_config() is called at runtime to set the mapping
* between the vector and the IRQ line as well as triggering flags
*
* @param irq_p IRQ line number
* @param priority_p Interrupt priority
* @param isr_p Interrupt service routine
* @param isr_param_p ISR parameter
* @param flags_p IRQ triggering options, as defined in irq_controller.h
*
* @return The vector assigned to this interrupt
*/
#define _ARCH_IRQ_CONNECT(irq_p, priority_p, isr_p, isr_param_p, flags_p) \
({ \
__asm__ __volatile__( \
".pushsection .intList\n\t" \
".long %c[isr]_irq%c[irq]_stub\n\t" /* ISR_LIST.fnc */ \
".long %c[irq]\n\t" /* ISR_LIST.irq */ \
".long %c[priority]\n\t" /* ISR_LIST.priority */ \
".long %c[vector]\n\t" /* ISR_LIST.vec */ \
".long 0\n\t" /* ISR_LIST.dpl */ \
".long 0\n\t" /* ISR_LIST.tss */ \
".popsection\n\t" \
".pushsection .text.irqstubs\n\t" \
".global %c[isr]_irq%c[irq]_stub\n\t" \
"%c[isr]_irq%c[irq]_stub:\n\t" \
"pushl %[isr_param]\n\t" \
"pushl %[isr]\n\t" \
"jmp _interrupt_enter\n\t" \
".popsection\n\t" \
: \
: [isr] "i" (isr_p), \
[isr_param] "i" (isr_param_p), \
[priority] "i" (priority_p), \
[vector] "i" _VECTOR_ARG(irq_p), \
[irq] "i" (irq_p)); \
_irq_controller_irq_config(_IRQ_TO_INTERRUPT_VECTOR(irq_p), (irq_p), \
(flags_p)); \
_IRQ_TO_INTERRUPT_VECTOR(irq_p); \
})
/** Configure a 'direct' static interrupt
*
* All arguments must be computable by the compiler at build time
*
*/
#define _ARCH_IRQ_DIRECT_CONNECT(irq_p, priority_p, isr_p, flags_p) \
({ \
NANO_CPU_INT_REGISTER(isr_p, irq_p, priority_p, -1, 0); \
_irq_controller_irq_config(_IRQ_TO_INTERRUPT_VECTOR(irq_p), (irq_p), \
(flags_p)); \
_IRQ_TO_INTERRUPT_VECTOR(irq_p); \
})
#ifdef CONFIG_X86_FIXED_IRQ_MAPPING
/* Fixed vector-to-irq association mapping.
* No need for the table at all.
*/
#define _IRQ_TO_INTERRUPT_VECTOR(irq) _IRQ_CONTROLLER_VECTOR_MAPPING(irq)
#else
/**
* @brief Convert a statically connected IRQ to its interrupt vector number
*
* @param irq IRQ number
*/
extern unsigned char _irq_to_interrupt_vector[];
#define _IRQ_TO_INTERRUPT_VECTOR(irq) \
((unsigned int) _irq_to_interrupt_vector[irq])
#endif
#ifdef CONFIG_SYS_POWER_MANAGEMENT
extern void _arch_irq_direct_pm(void);
#define _ARCH_ISR_DIRECT_PM() _arch_irq_direct_pm()
#else
#define _ARCH_ISR_DIRECT_PM() do { } while (0)
#endif
#define _ARCH_ISR_DIRECT_HEADER() _arch_isr_direct_header()
#define _ARCH_ISR_DIRECT_FOOTER(swap) _arch_isr_direct_footer(swap)
/* FIXME prefer these inline, but see ZEP-1595 */
extern void _arch_isr_direct_header(void);
extern void _arch_isr_direct_footer(int maybe_swap);
#define _ARCH_ISR_DIRECT_DECLARE(name) \
static inline int name##_body(void); \
__attribute__ ((interrupt)) void name(void *stack_frame) \
{ \
ARG_UNUSED(stack_frame); \
int check_reschedule; \
ISR_DIRECT_HEADER(); \
check_reschedule = name##_body(); \
ISR_DIRECT_FOOTER(check_reschedule); \
} \
static inline int name##_body(void)
/**
* @brief Exception Stack Frame
*
* A pointer to an "exception stack frame" (ESF) is passed as an argument
* to exception handlers registered via nanoCpuExcConnect(). As the system
* always operates at ring 0, only the EIP, CS and EFLAGS registers are pushed
* onto the stack when an exception occurs.
*
* The exception stack frame includes the volatile registers (EAX, ECX, and
* EDX) as well as the 5 non-volatile registers (EDI, ESI, EBX, EBP and ESP).
* Those registers are pushed onto the stack by _ExcEnt().
*/
typedef struct nanoEsf {
unsigned int esp;
unsigned int ebp;
unsigned int ebx;
unsigned int esi;
unsigned int edi;
unsigned int edx;
unsigned int eax;
unsigned int ecx;
unsigned int errorCode;
unsigned int eip;
unsigned int cs;
unsigned int eflags;
} NANO_ESF;
struct _x86_syscall_stack_frame {
u32_t eip;
u32_t cs;
u32_t eflags;
/* These are only present if cs = USER_CODE_SEG */
u32_t esp;
u32_t ss;
};
/**
* @brief "interrupt stack frame" (ISF)
*
* An "interrupt stack frame" (ISF) as constructed by the processor and the
* interrupt wrapper function _interrupt_enter(). As the system always
* operates at ring 0, only the EIP, CS and EFLAGS registers are pushed onto
* the stack when an interrupt occurs.
*
* The interrupt stack frame includes the volatile registers EAX, ECX, and EDX
* plus nonvolatile EDI pushed on the stack by _interrupt_enter().
*
* Only target-based debug tools such as GDB require the other non-volatile
* registers (ESI, EBX, EBP and ESP) to be preserved during an interrupt.
*/
typedef struct nanoIsf {
#ifdef CONFIG_DEBUG_INFO
unsigned int esp;
unsigned int ebp;
unsigned int ebx;
unsigned int esi;
#endif /* CONFIG_DEBUG_INFO */
unsigned int edi;
unsigned int ecx;
unsigned int edx;
unsigned int eax;
unsigned int eip;
unsigned int cs;
unsigned int eflags;
} NANO_ISF;
#endif /* !_ASMLANGUAGE */
/*
* Reason codes passed to both _NanoFatalErrorHandler()
* and _SysFatalErrorHandler().
*/
/** Unhandled exception/interrupt */
#define _NANO_ERR_SPURIOUS_INT (0)
/** Page fault */
#define _NANO_ERR_PAGE_FAULT (1)
/** General protection fault */
#define _NANO_ERR_GEN_PROT_FAULT (2)
/** Stack corruption detected */
#define _NANO_ERR_STACK_CHK_FAIL (4)
/** Kernel Allocation Failure */
#define _NANO_ERR_ALLOCATION_FAIL (5)
/** Unhandled exception */
#define _NANO_ERR_CPU_EXCEPTION (6)
/** Kernel oops (fatal to thread) */
#define _NANO_ERR_KERNEL_OOPS (7)
/** Kernel panic (fatal to system) */
#define _NANO_ERR_KERNEL_PANIC (8)
#ifndef _ASMLANGUAGE
/**
* @brief Disable all interrupts on the CPU (inline)
*
* This routine disables interrupts. It can be called from either interrupt,
* task or fiber level. This routine returns an architecture-dependent
* lock-out key representing the "interrupt disable state" prior to the call;
* this key can be passed to irq_unlock() to re-enable interrupts.
*
* The lock-out key should only be used as the argument to the irq_unlock()
* API. It should never be used to manually re-enable interrupts or to inspect
* or manipulate the contents of the source register.
*
* This function can be called recursively: it will return a key to return the
* state of interrupt locking to the previous level.
*
* WARNINGS
* Invoking a kernel routine with interrupts locked may result in
* interrupts being re-enabled for an unspecified period of time. If the
* called routine blocks, interrupts will be re-enabled while another
* thread executes, or while the system is idle.
*
* The "interrupt disable state" is an attribute of a thread. Thus, if a
* fiber or task disables interrupts and subsequently invokes a kernel
* routine that causes the calling thread to block, the interrupt
* disable state will be restored when the thread is later rescheduled
* for execution.
*
* @return An architecture-dependent lock-out key representing the
* "interrupt disable state" prior to the call.
*
*/
static ALWAYS_INLINE unsigned int _arch_irq_lock(void)
{
unsigned int key = _do_irq_lock();
_int_latency_start();
return key;
}
/**
*
* @brief Enable all interrupts on the CPU (inline)
*
* This routine re-enables interrupts on the CPU. The @a key parameter
* is an architecture-dependent lock-out key that is returned by a previous
* invocation of irq_lock().
*
* This routine can be called from either interrupt, task or fiber level.
*
* @return N/A
*
*/
static ALWAYS_INLINE void _arch_irq_unlock(unsigned int key)
{
if (!(key & 0x200)) {
return;
}
_int_latency_stop();
_do_irq_unlock();
}
/**
* The NANO_SOFT_IRQ macro must be used as the value for the @a irq parameter
* to NANO_CPU_INT_REGISTER when connecting to an interrupt that does not
* correspond to any IRQ line (such as spurious vector or SW IRQ)
*/
#define NANO_SOFT_IRQ ((unsigned int) (-1))
/**
* @brief Enable a specific IRQ
* @param irq IRQ
*/
extern void _arch_irq_enable(unsigned int irq);
/**
* @brief Disable a specific IRQ
* @param irq IRQ
*/
extern void _arch_irq_disable(unsigned int irq);
/**
* @defgroup float_apis Floating Point APIs
* @ingroup kernel_apis
* @{
*/
/**
* @brief Enable preservation of floating point context information.
*
* This routine informs the kernel that the specified thread (which may be
* the current thread) will be using the floating point registers.
* The @a options parameter indicates which floating point register sets
* will be used by the specified thread:
*
* a) K_FP_REGS indicates x87 FPU and MMX registers only
* b) K_SSE_REGS indicates SSE registers (and also x87 FPU and MMX registers)
*
* Invoking this routine initializes the thread's floating point context info
* to that of an FPU that has been reset. The next time the thread is scheduled
* by _Swap() it will either inherit an FPU that is guaranteed to be in a "sane"
* state (if the most recent user of the FPU was cooperatively swapped out)
* or the thread's own floating point context will be loaded (if the most
* recent user of the FPU was preempted, or if this thread is the first user
* of the FPU). Thereafter, the kernel will protect the thread's FP context
* so that it is not altered during a preemptive context switch.
*
* @warning
* This routine should only be used to enable floating point support for a
* thread that does not currently have such support enabled already.
*
* @param thread ID of thread.
* @param options Registers to be preserved (K_FP_REGS or K_SSE_REGS).
*
* @return N/A
*/
extern void k_float_enable(k_tid_t thread, unsigned int options);
/**
* @brief Disable preservation of floating point context information.
*
* This routine informs the kernel that the specified thread (which may be
* the current thread) will no longer be using the floating point registers.
*
* @warning
* This routine should only be used to disable floating point support for
* a thread that currently has such support enabled.
*
* @param thread ID of thread.
*
* @return N/A
*/
extern void k_float_disable(k_tid_t thread);
/**
* @}
*/
#include <stddef.h> /* for size_t */
extern void k_cpu_idle(void);
extern u32_t _timer_cycle_get_32(void);
#define _arch_k_cycle_get_32() _timer_cycle_get_32()
/** kernel provided routine to report any detected fatal error. */
extern FUNC_NORETURN void _NanoFatalErrorHandler(unsigned int reason,
const NANO_ESF * pEsf);
/** User provided routine to handle any detected fatal error post reporting. */
extern FUNC_NORETURN void _SysFatalErrorHandler(unsigned int reason,
const NANO_ESF * pEsf);
#ifdef CONFIG_X86_STACK_PROTECTION
extern struct task_state_segment _main_tss;
#ifdef CONFIG_X86_USERSPACE
/* Syscall invocation macros. x86-specific machine constraints used to ensure
* args land in the proper registers, see implementation of
* _x86_syscall_entry_stub in userspace.S
*
* the entry stub clobbers EDX and ECX on IAMCU systems
*/
static inline u32_t _arch_syscall_invoke6(u32_t arg1, u32_t arg2, u32_t arg3,
u32_t arg4, u32_t arg5, u32_t arg6,
u32_t call_id)
{
u32_t ret;
__asm__ volatile("push %%ebp\n\t"
"mov %[arg6], %%ebp\n\t"
"int $0x80\n\t"
"pop %%ebp\n\t"
: "=a" (ret)
#ifdef CONFIG_X86_IAMCU
, "=d" (arg2), "=c" (arg3)
#endif
: "S" (call_id), "a" (arg1), "d" (arg2),
"c" (arg3), "b" (arg4), "D" (arg5),
[arg6] "m" (arg6)
: "memory");
return ret;
}
static inline u32_t _arch_syscall_invoke5(u32_t arg1, u32_t arg2, u32_t arg3,
u32_t arg4, u32_t arg5, u32_t call_id)
{
u32_t ret;
__asm__ volatile("int $0x80"
: "=a" (ret)
#ifdef CONFIG_X86_IAMCU
, "=d" (arg2), "=c" (arg3)
#endif
: "S" (call_id), "a" (arg1), "d" (arg2),
"c" (arg3), "b" (arg4), "D" (arg5)
: "memory");
return ret;
}
static inline u32_t _arch_syscall_invoke4(u32_t arg1, u32_t arg2, u32_t arg3,
u32_t arg4, u32_t call_id)
{
u32_t ret;
__asm__ volatile("int $0x80"
: "=a" (ret)
#ifdef CONFIG_X86_IAMCU
, "=d" (arg2), "=c" (arg3)
#endif
: "S" (call_id), "a" (arg1), "d" (arg2), "c" (arg3),
"b" (arg4)
: "memory");
return ret;
}
static inline u32_t _arch_syscall_invoke3(u32_t arg1, u32_t arg2, u32_t arg3,
u32_t call_id)
{
u32_t ret;
__asm__ volatile("int $0x80"
: "=a" (ret)
#ifdef CONFIG_X86_IAMCU
, "=d" (arg2), "=c" (arg3)
#endif
: "S" (call_id), "a" (arg1), "d" (arg2), "c" (arg3)
: "memory");
return ret;
}
static inline u32_t _arch_syscall_invoke2(u32_t arg1, u32_t arg2, u32_t call_id)
{
u32_t ret;
__asm__ volatile("int $0x80"
: "=a" (ret)
#ifdef CONFIG_X86_IAMCU
, "=d" (arg2)
#endif
: "S" (call_id), "a" (arg1), "d" (arg2)
: "memory"
#ifdef CONFIG_X86_IAMCU
, "ecx"
#endif
);
return ret;
}
static inline u32_t _arch_syscall_invoke1(u32_t arg1, u32_t call_id)
{
u32_t ret;
__asm__ volatile("int $0x80"
: "=a" (ret)
: "S" (call_id), "a" (arg1)
: "memory"
#ifdef CONFIG_X86_IAMCU
, "edx", "ecx"
#endif
);
return ret;
}
static inline u32_t _arch_syscall_invoke0(u32_t call_id)
{
u32_t ret;
__asm__ volatile("int $0x80"
: "=a" (ret)
: "S" (call_id)
: "memory"
#ifdef CONFIG_X86_IAMCU
, "edx", "ecx"
#endif
);
return ret;
}
static inline int _arch_is_user_context(void)
{
int cs;
/* On x86, read the CS register (which cannot be manually set) */
__asm__ volatile ("mov %%cs, %[cs_val]" : [cs_val] "=r" (cs));
return cs == USER_CODE_SEG;
}
/* With userspace enabled, stacks are arranged as follows:
*
* High memory addresses
* +---------------+
* | Thread stack |
* +---------------+
* | Kernel stack |
* +---------------+
* | Guard page |
* +---------------+
* Low Memory addresses
*
* Kernel stacks are fixed at 4K. All the pages containing the thread stack
* are marked as user-accessible.
* All threads start in supervisor mode, and the kernel stack/guard page
* are both marked non-present in the MMU.
* If a thread drops down to user mode, the kernel stack page will be marked
* as present, supervior-only, and the _main_tss.esp0 field updated to point
* to the top of it.
* All context switches will save/restore the esp0 field in the TSS.
*/
#define _STACK_GUARD_SIZE (MMU_PAGE_SIZE * 2)
#else /* !CONFIG_X86_USERSPACE */
#define _STACK_GUARD_SIZE MMU_PAGE_SIZE
#endif /* CONFIG_X86_USERSPACE */
#define _STACK_BASE_ALIGN MMU_PAGE_SIZE
#else /* !CONFIG_X86_STACK_PROTECTION */
#define _STACK_GUARD_SIZE 0
#define _STACK_BASE_ALIGN STACK_ALIGN
#endif /* CONFIG_X86_STACK_PROTECTION */
#define _ARCH_THREAD_STACK_DEFINE(sym, size) \
struct _k_thread_stack_element __noinit \
__aligned(_STACK_BASE_ALIGN) \
sym[(size) + _STACK_GUARD_SIZE]
#define _ARCH_THREAD_STACK_ARRAY_DEFINE(sym, nmemb, size) \
struct _k_thread_stack_element __noinit \
__aligned(_STACK_BASE_ALIGN) \
sym[nmemb][ROUND_UP(size, _STACK_BASE_ALIGN) + \
_STACK_GUARD_SIZE]
#define _ARCH_THREAD_STACK_MEMBER(sym, size) \
struct _k_thread_stack_element __aligned(_STACK_BASE_ALIGN) \
sym[(size) + _STACK_GUARD_SIZE]
#define _ARCH_THREAD_STACK_SIZEOF(sym) \
(sizeof(sym) - _STACK_GUARD_SIZE)
#define _ARCH_THREAD_STACK_BUFFER(sym) \
((char *)((sym) + _STACK_GUARD_SIZE))
#if CONFIG_X86_KERNEL_OOPS
#define _ARCH_EXCEPT(reason_p) do { \
__asm__ volatile( \
"push %[reason]\n\t" \
"int %[vector]\n\t" \
: \
: [vector] "i" (CONFIG_X86_KERNEL_OOPS_VECTOR), \
[reason] "i" (reason_p)); \
CODE_UNREACHABLE; \
} while (0)
#endif
/** Dummy ESF for fatal errors that would otherwise not have an ESF */
extern const NANO_ESF _default_esf;
#ifdef CONFIG_X86_MMU
/* Linker variable. It needed to access the start of the Page directory */
extern u32_t __mmu_tables_start;
#define X86_MMU_PD ((struct x86_mmu_page_directory *)\
(void *)&__mmu_tables_start)
/**
* @brief Fetch page table flags for a particular page
*
* Given a memory address, return the flags for the containing page's
* PDE and PTE entries. Intended for debugging.
*
* @param addr Memory address to example
* @param pde_flags Output parameter for page directory entry flags
* @param pte_flags Output parameter for page table entry flags
*/
void _x86_mmu_get_flags(void *addr, u32_t *pde_flags, u32_t *pte_flags);
/**
* @brief set flags in the MMU page tables
*
* Modify bits in the existing page tables for a particular memory
* range, which must be page-aligned
*
* @param ptr Starting memory address which must be page-aligned
* @param size Size of the region, must be page size multiple
* @flags Value of bits to set in the page table entries
* @mask Mask indicating which particular bits in the page table entries to
* modify
*/
void _x86_mmu_set_flags(void *ptr, size_t size, u32_t flags, u32_t mask);
#endif /* CONFIG_X86_MMU */
#endif /* !_ASMLANGUAGE */
/* reboot through Reset Control Register (I/O port 0xcf9) */
#define SYS_X86_RST_CNT_REG 0xcf9
#define SYS_X86_RST_CNT_SYS_RST 0x02
#define SYS_X86_RST_CNT_CPU_RST 0x4
#define SYS_X86_RST_CNT_FULL_RST 0x08
#ifdef __cplusplus
}
#endif
#endif /* _ARCH_IFACE_H */