boards/renesas/ek_ra2l1/ek_ra2l1.dts

/**
 * Copyright (c) 2021-2024 MUNIC SA
 * Copyright (c) 2024-2025 Renesas Electronics Corporation
 *
 * DTS for Renesas EK-RA2L1 eval. board
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <renesas/ra/ra2/ra2l1.dtsi>
#include <renesas/ra/ra2/r7fa2l1xb.dtsi>
#include <renesas/ra/ra2/r7fa2l1xxxxfp.dtsi>

#include <zephyr/dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/adc/adc.h>
#include <dt-bindings/input/input-event-codes.h>
#include "ek_ra2l1-pinctrl.dtsi"

/ {
	model = "Renesas EK-RA2L1";
	compatible = "renesas,r7fa2l1abxxfp", "renesas,ra2l1";

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,entropy = &trng;
	};

	leds {
		compatible = "gpio-leds";

		led1: led1 {
			gpios = <&ioport5 3 GPIO_ACTIVE_HIGH>;
			label = "LED1";
		};
	};

	buttons {
		compatible = "gpio-keys";

		button0: s1 {
			gpios = <&ioport0 4 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 1";
			zephyr,code = <INPUT_KEY_0>;
		};

		button1: s2 {
			gpios = <&ioport0 15 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 2";
			zephyr,code = <INPUT_KEY_1>;
		};
	};

	aliases {
		led0 = &led1;
		sw0 = &button0;
		sw1 = &button1;
		watchdog0 = &wdt;
	};
};

&ioport5 {
	status = "okay";
};

&ioport0 {
	status = "okay";
};

&sci0 {
	pinctrl-0 = <&sci0_default>;
	pinctrl-names = "default";
	status = "okay";

	uart0: uart {
		current-speed = <115200>;
		status = "okay";
	};
};

&wdt {
	status = "okay";
};

&trng {
	status = "okay";
};

&adc0 {
	pinctrl-0 = <&adc0_default>;
	pinctrl-names = "default";
	interrupts = <8 1>;
	interrupt-names = "scanend";
	status = "okay";
};

&dac0 {
	pinctrl-0 = <&dac0_default>;
	pinctrl-names = "default";
	status = "okay";
};

&port_irq3 {
	interrupts = <11 1>;
	status = "okay";
};

&port_irq7 {
	interrupts = <15 1>;
	status = "okay";
};