boards/renesas/fpb_ra6e2/fpb_ra6e2.dts

/*
 * Copyright (c) 2024-2025 Renesas Electronics Corporation
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <renesas/ra/ra6/r7fa6e2bb3cfm.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input-event-codes.h>
#include <zephyr/dt-bindings/adc/adc.h>

#include "fpb_ra6e2-pinctrl.dtsi"

/ {
	model = "Renesas FPB-RA6E2";
	compatible = "renesas,ra6e2", "renesas,ra";

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash = &flash0;
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,entropy = &trng;
	};

	leds {
		compatible = "gpio-leds";
		led1: led1 {
			gpios = <&ioport2 7 GPIO_ACTIVE_HIGH>;
			label = "LED1";
		};
		led2: led2 {
			gpios = <&ioport2 6 GPIO_ACTIVE_HIGH>;
			label = "LED2";
		};
	};

	buttons {
		compatible = "gpio-keys";
		button0: s1 {
			gpios = <&ioport3 4 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push button switch 1";
			zephyr,code = <INPUT_KEY_0>;
		};
	};

	aliases {
		led0 = &led1;
		led1 = &led2;
		sw0 = &button0;
		watchdog0 = &wdt;
	};
};

&sci0 {
	pinctrl-0 = <&sci0_default>;
	pinctrl-names = "default";
	status = "okay";
	uart0: uart {
		current-speed = <115200>;
		status = "okay";
	};
};

&spi0 {
	pinctrl-0 = <&spi0_default>;
	pinctrl-names = "default";
	status = "okay";
};

&ioport2 {
	status = "okay";
};

&ioport3 {
	status = "okay";
};

&flash0 {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		storage_partition: partition@0 {
			label = "storage";
			reg = <0X0 DT_SIZE_K(4)>;
		};
	};
};

&subclk {
	status = "okay";
};

&pll {
	clocks = <&hoco>;
	div = <1>;
	mul = <10 0>;
	status = "okay";
};

&adc0 {
	status = "okay";
	pinctrl-0 = <&adc0_default>;
	pinctrl-names = "default";
};

&dac0 {
	pinctrl-0 = <&dac0_default>;
	pinctrl-names = "default";
	status = "okay";
};

&port_irq9 {
	interrupts = <41 12>;
	status = "okay";
};

&pwm1 {
	pinctrl-0 = <&pwm1_default>;
	pinctrl-names = "default";
	interrupts = <63 1>, <64 1>;
	interrupt-names = "gtioca", "overflow";
	divider = <RA_PWM_SOURCE_DIV_256>;
	status = "okay";
};

&trng {
	status ="okay";
};

&wdt {
	status = "okay";
};