| /* |
| * Copyright (c) 2020 Andreas Sandberg |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <drivers/lora.h> |
| #include <inttypes.h> |
| #include <shell/shell.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| LOG_MODULE_REGISTER(lora_shell, CONFIG_LORA_LOG_LEVEL); |
| |
| #define DEFAULT_RADIO_NODE DT_ALIAS(lora0) |
| BUILD_ASSERT(DT_NODE_HAS_STATUS(DEFAULT_RADIO_NODE, okay), |
| "No default LoRa radio specified in DT"); |
| #define DEFAULT_RADIO DT_LABEL(DEFAULT_RADIO_NODE) |
| |
| static struct lora_modem_config modem_config = { |
| .frequency = 0, |
| .bandwidth = BW_125_KHZ, |
| .datarate = SF_10, |
| .coding_rate = CR_4_5, |
| .preamble_len = 8, |
| .tx_power = 4, |
| }; |
| |
| static const int bw_table[] = { |
| [BW_125_KHZ] = 125, |
| [BW_250_KHZ] = 250, |
| [BW_500_KHZ] = 500, |
| }; |
| |
| static int parse_long(long *out, const struct shell *shell, const char *arg) |
| { |
| char *eptr; |
| long lval; |
| |
| lval = strtol(arg, &eptr, 0); |
| if (*eptr != '\0') { |
| shell_error(shell, "'%s' is not an integer", arg); |
| return -EINVAL; |
| } |
| |
| *out = lval; |
| return 0; |
| } |
| |
| static int parse_long_range(long *out, const struct shell *shell, |
| const char *arg, const char *name, long min, |
| long max) |
| { |
| int ret; |
| |
| ret = parse_long(out, shell, arg); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| if (*out < min || *out > max) { |
| shell_error(shell, "Parameter '%s' is out of range. " |
| "Valid range is %li -- %li.", |
| name, min, max); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int parse_freq(uint32_t *out, const struct shell *shell, const char *arg) |
| { |
| char *eptr; |
| unsigned long val; |
| |
| val = strtoul(arg, &eptr, 0); |
| if (*eptr != '\0') { |
| shell_error(shell, "Invalid frequency, '%s' is not an integer", |
| arg); |
| return -EINVAL; |
| } |
| |
| if (val == ULONG_MAX) { |
| shell_error(shell, "Frequency %s out of range", arg); |
| return -EINVAL; |
| } |
| |
| *out = (uint32_t)val; |
| return 0; |
| } |
| |
| static const struct device *get_modem(const struct shell *shell) |
| { |
| const struct device *dev; |
| |
| dev = device_get_binding(DEFAULT_RADIO); |
| if (!dev) { |
| shell_error(shell, "%s Device not found", DEFAULT_RADIO); |
| return NULL; |
| } |
| |
| return dev; |
| } |
| |
| static const struct device *get_configured_modem(const struct shell *shell) |
| { |
| int ret; |
| const struct device *dev; |
| |
| dev = get_modem(shell); |
| if (!dev) { |
| return NULL; |
| } |
| |
| if (modem_config.frequency == 0) { |
| shell_error(shell, "No frequency specified."); |
| return NULL; |
| } |
| |
| ret = lora_config(dev, &modem_config); |
| if (ret < 0) { |
| shell_error(shell, "LoRa config failed"); |
| return NULL; |
| } |
| |
| return dev; |
| } |
| |
| static int lora_conf_dump(const struct shell *shell) |
| { |
| shell_print(shell, DEFAULT_RADIO ":"); |
| shell_print(shell, " Frequency: %" PRIu32 " Hz", |
| modem_config.frequency); |
| shell_print(shell, " TX power: %" PRIi8 " dBm", |
| modem_config.tx_power); |
| shell_print(shell, " Bandwidth: %i kHz", |
| bw_table[modem_config.bandwidth]); |
| shell_print(shell, " Spreading factor: SF%i", |
| (int)modem_config.datarate); |
| shell_print(shell, " Coding rate: 4/%i", |
| (int)modem_config.coding_rate + 4); |
| shell_print(shell, " Preamble length: %" PRIu16, |
| modem_config.preamble_len); |
| |
| return 0; |
| } |
| |
| static int lora_conf_set(const struct shell *shell, const char *param, |
| const char *value) |
| { |
| long lval; |
| |
| if (!strcmp("freq", param)) { |
| if (parse_freq(&modem_config.frequency, shell, value) < 0) { |
| return -EINVAL; |
| } |
| } else if (!strcmp("tx-power", param)) { |
| if (parse_long_range(&lval, shell, value, |
| "tx-power", INT8_MIN, INT8_MAX) < 0) { |
| return -EINVAL; |
| } |
| modem_config.tx_power = lval; |
| } else if (!strcmp("bw", param)) { |
| if (parse_long_range(&lval, shell, value, |
| "bw", 0, INT8_MAX) < 0) { |
| return -EINVAL; |
| } |
| switch (lval) { |
| case 125: |
| modem_config.bandwidth = BW_125_KHZ; |
| break; |
| case 250: |
| modem_config.bandwidth = BW_250_KHZ; |
| break; |
| case 500: |
| modem_config.bandwidth = BW_500_KHZ; |
| break; |
| default: |
| shell_error(shell, "Invalid bandwidth: %s", lval); |
| return -EINVAL; |
| } |
| } else if (!strcmp("sf", param)) { |
| if (parse_long_range(&lval, shell, value, "sf", 6, 12) < 0) { |
| return -EINVAL; |
| } |
| modem_config.datarate = SF_6 + (unsigned int)lval - 6; |
| } else if (!strcmp("cr", param)) { |
| if (parse_long_range(&lval, shell, value, "cr", 5, 8) < 0) { |
| return -EINVAL; |
| } |
| modem_config.coding_rate = CR_4_5 + (unsigned int)lval - 5; |
| } else if (!strcmp("pre-len", param)) { |
| if (parse_long_range(&lval, shell, value, |
| "pre-len", 0, UINT16_MAX) < 0) { |
| return -EINVAL; |
| } |
| modem_config.preamble_len = lval; |
| } else { |
| shell_error(shell, "Unknown parameter '%s'", param); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_lora_conf(const struct shell *shell, size_t argc, char **argv) |
| { |
| int i; |
| int ret; |
| |
| if (argc < 2) { |
| return lora_conf_dump(shell); |
| } |
| |
| for (i = 1; i < argc; i += 2) { |
| if (i + 1 >= argc) { |
| shell_error(shell, "'%s' expects an argument", |
| argv[i]); |
| return -EINVAL; |
| } |
| |
| ret = lora_conf_set(shell, argv[i], argv[i + 1]); |
| if (ret != 0) { |
| return ret; |
| } |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_lora_send(const struct shell *shell, |
| size_t argc, char **argv) |
| { |
| int ret; |
| const struct device *dev; |
| |
| modem_config.tx = true; |
| dev = get_configured_modem(shell); |
| if (!dev) { |
| return -ENODEV; |
| } |
| |
| ret = lora_send(dev, argv[1], strlen(argv[1])); |
| if (ret < 0) { |
| shell_error(shell, "LoRa send failed: %i", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int cmd_lora_recv(const struct shell *shell, size_t argc, char **argv) |
| { |
| static char buf[0xff]; |
| const struct device *dev; |
| long timeout = 0; |
| int ret; |
| int16_t rssi; |
| int8_t snr; |
| |
| modem_config.tx = false; |
| dev = get_configured_modem(shell); |
| if (!dev) { |
| return -ENODEV; |
| } |
| |
| if (argc >= 2 && parse_long_range(&timeout, shell, argv[1], |
| "timeout", 0, INT_MAX) < 0) { |
| return -EINVAL; |
| } |
| |
| ret = lora_recv(dev, buf, sizeof(buf), |
| timeout ? K_MSEC(timeout) : K_FOREVER, &rssi, &snr); |
| if (ret < 0) { |
| shell_error(shell, "LoRa recv failed: %i", ret); |
| return ret; |
| } |
| |
| shell_hexdump(shell, buf, ret); |
| shell_print(shell, "RSSI: %" PRIi16 " dBm, SNR:%" PRIi8 " dBm", |
| rssi, snr); |
| |
| return 0; |
| } |
| |
| static int cmd_lora_test_cw(const struct shell *shell, |
| size_t argc, char **argv) |
| { |
| const struct device *dev; |
| int ret; |
| uint32_t freq; |
| long power, duration; |
| |
| dev = get_modem(shell); |
| if (!dev) { |
| return -ENODEV; |
| } |
| |
| if (parse_freq(&freq, shell, argv[1]) < 0 || |
| parse_long_range(&power, shell, argv[2], |
| "power", INT8_MIN, INT8_MAX) < 0 || |
| parse_long_range(&duration, shell, argv[3], |
| "duration", 0, UINT16_MAX) < 0) { |
| return -EINVAL; |
| } |
| |
| ret = lora_test_cw(dev, (uint32_t)freq, (int8_t)power, (uint16_t)duration); |
| if (ret < 0) { |
| shell_error(shell, "LoRa test CW failed: %i", ret); |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| SHELL_STATIC_SUBCMD_SET_CREATE(sub_lora, |
| SHELL_CMD(config, NULL, |
| "Configure the LoRa radio\n" |
| " Usage: config [freq <Hz>] [tx-power <dBm>] [bw <kHz>] " |
| "[sf <int>] [cr <int>] [pre-len <int>]\n", |
| cmd_lora_conf), |
| SHELL_CMD_ARG(send, NULL, |
| "Send LoRa packet\n" |
| " Usage: send <data>", |
| cmd_lora_send, 2, 0), |
| SHELL_CMD_ARG(recv, NULL, |
| "Receive LoRa packet\n" |
| " Usage: recv [timeout (ms)]", |
| cmd_lora_recv, 1, 1), |
| SHELL_CMD_ARG(test_cw, NULL, |
| "Send a continuous wave\n" |
| " Usage: test_cw <freq (Hz)> <power (dBm)> <duration (s)>", |
| cmd_lora_test_cw, 4, 0), |
| SHELL_SUBCMD_SET_END /* Array terminated. */ |
| ); |
| |
| SHELL_CMD_REGISTER(lora, &sub_lora, "LoRa commands", NULL); |