| /* |
| * Copyright (c) 2017 Intel Corporation |
| * Copyright (c) 2020 Lingao Meng |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <zephyr/kernel.h> |
| #include <string.h> |
| #include <errno.h> |
| #include <stdbool.h> |
| #include <stdlib.h> |
| #include <zephyr/sys/atomic.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| |
| #include <zephyr/net/buf.h> |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/conn.h> |
| #include <zephyr/bluetooth/mesh.h> |
| |
| #include "mesh.h" |
| #include "adv.h" |
| #include "net.h" |
| #include "rpl.h" |
| #include "settings.h" |
| |
| #define LOG_LEVEL CONFIG_BT_MESH_RPL_LOG_LEVEL |
| #include <zephyr/logging/log.h> |
| LOG_MODULE_REGISTER(bt_mesh_rpl); |
| |
| /* Replay Protection List information for persistent storage. */ |
| struct rpl_val { |
| uint32_t seq:24, |
| old_iv:1; |
| }; |
| |
| static struct bt_mesh_rpl replay_list[CONFIG_BT_MESH_CRPL]; |
| static ATOMIC_DEFINE(store, CONFIG_BT_MESH_CRPL); |
| static atomic_t clear; |
| |
| static inline int rpl_idx(const struct bt_mesh_rpl *rpl) |
| { |
| return rpl - &replay_list[0]; |
| } |
| |
| static void clear_rpl(struct bt_mesh_rpl *rpl) |
| { |
| int err; |
| char path[18]; |
| |
| if (!rpl->src) { |
| return; |
| } |
| |
| snprintk(path, sizeof(path), "bt/mesh/RPL/%x", rpl->src); |
| err = settings_delete(path); |
| if (err) { |
| LOG_ERR("Failed to clear RPL"); |
| } else { |
| LOG_DBG("Cleared RPL"); |
| } |
| |
| (void)memset(rpl, 0, sizeof(*rpl)); |
| atomic_clear_bit(store, rpl_idx(rpl)); |
| } |
| |
| static void schedule_rpl_store(struct bt_mesh_rpl *entry, bool force) |
| { |
| atomic_set_bit(store, rpl_idx(entry)); |
| |
| if (force |
| #ifdef CONFIG_BT_MESH_RPL_STORE_TIMEOUT |
| || CONFIG_BT_MESH_RPL_STORE_TIMEOUT >= 0 |
| #endif |
| ) { |
| bt_mesh_settings_store_schedule(BT_MESH_SETTINGS_RPL_PENDING); |
| } |
| } |
| |
| void bt_mesh_rpl_update(struct bt_mesh_rpl *rpl, |
| struct bt_mesh_net_rx *rx) |
| { |
| /* If this is the first message on the new IV index, we should reset it |
| * to zero to avoid invalid combinations of IV index and seg. |
| */ |
| if (rpl->old_iv && !rx->old_iv) { |
| rpl->seg = 0; |
| } |
| |
| rpl->src = rx->ctx.addr; |
| rpl->seq = rx->seq; |
| rpl->old_iv = rx->old_iv; |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| schedule_rpl_store(rpl, false); |
| } |
| } |
| |
| /* Check the Replay Protection List for a replay attempt. If non-NULL match |
| * parameter is given the RPL slot is returned but it is not immediately |
| * updated (needed for segmented messages), whereas if a NULL match is given |
| * the RPL is immediately updated (used for unsegmented messages). |
| */ |
| bool bt_mesh_rpl_check(struct bt_mesh_net_rx *rx, |
| struct bt_mesh_rpl **match) |
| { |
| int i; |
| |
| /* Don't bother checking messages from ourselves */ |
| if (rx->net_if == BT_MESH_NET_IF_LOCAL) { |
| return false; |
| } |
| |
| /* The RPL is used only for the local node */ |
| if (!rx->local_match) { |
| return false; |
| } |
| |
| for (i = 0; i < ARRAY_SIZE(replay_list); i++) { |
| struct bt_mesh_rpl *rpl = &replay_list[i]; |
| |
| /* Empty slot */ |
| if (!rpl->src) { |
| if (match) { |
| *match = rpl; |
| } else { |
| bt_mesh_rpl_update(rpl, rx); |
| } |
| |
| return false; |
| } |
| |
| /* Existing slot for given address */ |
| if (rpl->src == rx->ctx.addr) { |
| if (rx->old_iv && !rpl->old_iv) { |
| return true; |
| } |
| |
| if ((!rx->old_iv && rpl->old_iv) || |
| rpl->seq < rx->seq) { |
| if (match) { |
| *match = rpl; |
| } else { |
| bt_mesh_rpl_update(rpl, rx); |
| } |
| |
| return false; |
| } else { |
| return true; |
| } |
| } |
| } |
| |
| LOG_ERR("RPL is full!"); |
| return true; |
| } |
| |
| void bt_mesh_rpl_clear(void) |
| { |
| LOG_DBG(""); |
| |
| if (!IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| (void)memset(replay_list, 0, sizeof(replay_list)); |
| return; |
| } |
| |
| (void)atomic_cas(&clear, 0, 1); |
| |
| bt_mesh_settings_store_schedule(BT_MESH_SETTINGS_RPL_PENDING); |
| } |
| |
| static struct bt_mesh_rpl *bt_mesh_rpl_find(uint16_t src) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(replay_list); i++) { |
| if (replay_list[i].src == src) { |
| return &replay_list[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static struct bt_mesh_rpl *bt_mesh_rpl_alloc(uint16_t src) |
| { |
| int i; |
| |
| for (i = 0; i < ARRAY_SIZE(replay_list); i++) { |
| if (!replay_list[i].src) { |
| replay_list[i].src = src; |
| return &replay_list[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| void bt_mesh_rpl_reset(void) |
| { |
| int shift = 0; |
| int last = 0; |
| |
| /* Discard "old old" IV Index entries from RPL and flag |
| * any other ones (which are valid) as old. |
| */ |
| for (int i = 0; i < ARRAY_SIZE(replay_list); i++) { |
| struct bt_mesh_rpl *rpl = &replay_list[i]; |
| |
| if (rpl->src) { |
| if (rpl->old_iv) { |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| clear_rpl(rpl); |
| } else { |
| (void)memset(rpl, 0, sizeof(*rpl)); |
| } |
| |
| shift++; |
| } else { |
| rpl->old_iv = true; |
| |
| if (shift > 0) { |
| replay_list[i - shift] = *rpl; |
| } |
| |
| if (IS_ENABLED(CONFIG_BT_SETTINGS)) { |
| schedule_rpl_store(&replay_list[i - shift], true); |
| } |
| } |
| |
| last = i; |
| } |
| } |
| |
| (void) memset(&replay_list[last - shift + 1], 0, sizeof(struct bt_mesh_rpl) * shift); |
| } |
| |
| static int rpl_set(const char *name, size_t len_rd, |
| settings_read_cb read_cb, void *cb_arg) |
| { |
| struct bt_mesh_rpl *entry; |
| struct rpl_val rpl; |
| int err; |
| uint16_t src; |
| |
| if (!name) { |
| LOG_ERR("Insufficient number of arguments"); |
| return -ENOENT; |
| } |
| |
| src = strtol(name, NULL, 16); |
| entry = bt_mesh_rpl_find(src); |
| |
| if (len_rd == 0) { |
| LOG_DBG("val (null)"); |
| if (entry) { |
| (void)memset(entry, 0, sizeof(*entry)); |
| } else { |
| LOG_WRN("Unable to find RPL entry for 0x%04x", src); |
| } |
| |
| return 0; |
| } |
| |
| if (!entry) { |
| entry = bt_mesh_rpl_alloc(src); |
| if (!entry) { |
| LOG_ERR("Unable to allocate RPL entry for 0x%04x", src); |
| return -ENOMEM; |
| } |
| } |
| |
| err = bt_mesh_settings_set(read_cb, cb_arg, &rpl, sizeof(rpl)); |
| if (err) { |
| LOG_ERR("Failed to set `net`"); |
| return err; |
| } |
| |
| entry->seq = rpl.seq; |
| entry->old_iv = rpl.old_iv; |
| |
| LOG_DBG("RPL entry for 0x%04x: Seq 0x%06x old_iv %u", entry->src, entry->seq, |
| entry->old_iv); |
| |
| return 0; |
| } |
| |
| BT_MESH_SETTINGS_DEFINE(rpl, "RPL", rpl_set); |
| |
| static void store_rpl(struct bt_mesh_rpl *entry) |
| { |
| struct rpl_val rpl; |
| char path[18]; |
| int err; |
| |
| if (!entry->src) { |
| return; |
| } |
| |
| LOG_DBG("src 0x%04x seq 0x%06x old_iv %u", entry->src, entry->seq, entry->old_iv); |
| |
| rpl.seq = entry->seq; |
| rpl.old_iv = entry->old_iv; |
| |
| snprintk(path, sizeof(path), "bt/mesh/RPL/%x", entry->src); |
| |
| err = settings_save_one(path, &rpl, sizeof(rpl)); |
| if (err) { |
| LOG_ERR("Failed to store RPL %s value", path); |
| } else { |
| LOG_DBG("Stored RPL %s value", path); |
| } |
| } |
| |
| void bt_mesh_rpl_pending_store(uint16_t addr) |
| { |
| bool clr; |
| |
| if (!IS_ENABLED(CONFIG_BT_SETTINGS) || |
| (!BT_MESH_ADDR_IS_UNICAST(addr) && |
| addr != BT_MESH_ADDR_ALL_NODES)) { |
| return; |
| } |
| |
| if (addr == BT_MESH_ADDR_ALL_NODES) { |
| bt_mesh_settings_store_cancel(BT_MESH_SETTINGS_RPL_PENDING); |
| } |
| |
| clr = atomic_cas(&clear, 1, 0); |
| |
| for (int i = 0; i < ARRAY_SIZE(replay_list); i++) { |
| if (addr != BT_MESH_ADDR_ALL_NODES && |
| addr != replay_list[i].src) { |
| continue; |
| } |
| |
| if (clr) { |
| clear_rpl(&replay_list[i]); |
| } else if (atomic_test_and_clear_bit(store, rpl_idx(&replay_list[i]))) { |
| store_rpl(&replay_list[i]); |
| } |
| |
| if (addr != BT_MESH_ADDR_ALL_NODES) { |
| break; |
| } |
| } |
| } |