blob: 63b72f52807964af295702305d1ecd5213fdc3df [file] [log] [blame]
/*
* Copyright (c) 2016 Intel Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <device.h>
#include <i2c.h>
#include <kernel.h>
#include <sensor.h>
#include <misc/__assert.h>
#include "sht3xd.h"
/*
* CRC algorithm parameters were taken from the
* "Checksum Calculation" section of the datasheet.
*/
static u8_t sht3xd_compute_crc(u16_t value)
{
u8_t buf[2] = {value >> 8, value & 0xFF};
u8_t crc = 0xFF;
u8_t polynom = 0x31;
int i, j;
for (i = 0; i < 2; ++i) {
crc = crc ^ buf[i];
for (j = 0; j < 8; ++j) {
if (crc & 0x80) {
crc = (crc << 1) ^ polynom;
} else {
crc = crc << 1;
}
}
}
return crc;
}
int sht3xd_write_command(struct sht3xd_data *drv_data, u16_t cmd)
{
u8_t tx_buf[2] = {cmd >> 8, cmd & 0xFF};
return i2c_write(drv_data->i2c, tx_buf, sizeof(tx_buf),
SHT3XD_I2C_ADDRESS);
}
int sht3xd_write_reg(struct sht3xd_data *drv_data, u16_t cmd,
u16_t val)
{
u8_t tx_buf[5];
tx_buf[0] = cmd >> 8;
tx_buf[1] = cmd & 0xFF;
tx_buf[2] = val >> 8;
tx_buf[3] = val & 0xFF;
tx_buf[4] = sht3xd_compute_crc(val);
return i2c_write(drv_data->i2c, tx_buf, sizeof(tx_buf),
SHT3XD_I2C_ADDRESS);
}
static int sht3xd_sample_fetch(struct device *dev, enum sensor_channel chan)
{
struct sht3xd_data *drv_data = dev->driver_data;
u8_t rx_buf[6];
u16_t t_sample, rh_sample;
__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL);
u8_t tx_buf[2] = {
SHT3XD_CMD_FETCH >> 8,
SHT3XD_CMD_FETCH & 0xFF
};
struct i2c_msg msgs[2] = {
{
.buf = tx_buf,
.len = sizeof(tx_buf),
.flags = I2C_MSG_WRITE | I2C_MSG_RESTART,
},
{
.buf = rx_buf,
.len = sizeof(rx_buf),
.flags = I2C_MSG_READ | I2C_MSG_STOP,
},
};
if (i2c_transfer(drv_data->i2c, msgs, 2, SHT3XD_I2C_ADDRESS) < 0) {
SYS_LOG_DBG("Failed to read data sample!");
return -EIO;
}
t_sample = (rx_buf[0] << 8) | rx_buf[1];
if (sht3xd_compute_crc(t_sample) != rx_buf[2]) {
SYS_LOG_DBG("Received invalid temperature CRC!");
return -EIO;
}
rh_sample = (rx_buf[3] << 8) | rx_buf[4];
if (sht3xd_compute_crc(rh_sample) != rx_buf[5]) {
SYS_LOG_DBG("Received invalid relative humidity CRC!");
return -EIO;
}
drv_data->t_sample = t_sample;
drv_data->rh_sample = rh_sample;
return 0;
}
static int sht3xd_channel_get(struct device *dev,
enum sensor_channel chan,
struct sensor_value *val)
{
struct sht3xd_data *drv_data = dev->driver_data;
u64_t tmp;
/*
* See datasheet "Conversion of Signal Output" section
* for more details on processing sample data.
*/
if (chan == SENSOR_CHAN_TEMP) {
/* val = -45 + 175 * sample / (2^16 -1) */
tmp = 175 * (u64_t)drv_data->t_sample;
val->val1 = (s32_t)(tmp / 0xFFFF) - 45;
val->val2 = (1000000 * (tmp % 0xFFFF)) / 0xFFFF;
} else if (chan == SENSOR_CHAN_HUMIDITY) {
/* val = 100000 * sample / (2^16 -1) */
tmp = 100000 * (u64_t)drv_data->rh_sample;
val->val1 = tmp / 0xFFFF;
val->val2 = (1000000 * (tmp % 0xFFFF)) / 0xFFFF;
} else {
return -ENOTSUP;
}
return 0;
}
static const struct sensor_driver_api sht3xd_driver_api = {
#ifdef CONFIG_SHT3XD_TRIGGER
.attr_set = sht3xd_attr_set,
.trigger_set = sht3xd_trigger_set,
#endif
.sample_fetch = sht3xd_sample_fetch,
.channel_get = sht3xd_channel_get,
};
static int sht3xd_init(struct device *dev)
{
struct sht3xd_data *drv_data = dev->driver_data;
drv_data->i2c = device_get_binding(CONFIG_SHT3XD_I2C_MASTER_DEV_NAME);
if (drv_data->i2c == NULL) {
SYS_LOG_DBG("Failed to get pointer to %s device!",
CONFIG_SHT3XD_I2C_MASTER_DEV_NAME);
return -EINVAL;
}
/* clear status register */
if (sht3xd_write_command(drv_data, SHT3XD_CMD_CLEAR_STATUS) < 0) {
SYS_LOG_DBG("Failed to clear status register!");
return -EIO;
}
k_busy_wait(SHT3XD_CLEAR_STATUS_WAIT_USEC);
/* set periodic measurement mode */
if (sht3xd_write_command(drv_data,
sht3xd_measure_cmd[SHT3XD_MPS_IDX][SHT3XD_REPEATABILITY_IDX])
< 0) {
SYS_LOG_DBG("Failed to set measurement mode!");
return -EIO;
}
k_busy_wait(sht3xd_measure_wait[SHT3XD_REPEATABILITY_IDX]);
#ifdef CONFIG_SHT3XD_TRIGGER
if (sht3xd_init_interrupt(dev) < 0) {
SYS_LOG_DBG("Failed to initialize interrupt");
return -EIO;
}
#endif
dev->driver_api = &sht3xd_driver_api;
return 0;
}
struct sht3xd_data sht3xd_driver;
DEVICE_INIT(sht3xd, CONFIG_SHT3XD_NAME, sht3xd_init, &sht3xd_driver,
NULL, POST_KERNEL, CONFIG_SENSOR_INIT_PRIORITY);