blob: 1ed8db1c54abc2bf348434d63df09394782652c8 [file] [log] [blame]
/*
* Copyright (c) 2018 Kokoon Technology Limited
* Copyright (c) 2019 Song Qiang <songqiang1304521@gmail.com>
* Copyright (c) 2019 Endre Karlson
* Copyright (c) 2020 Teslabs Engineering S.L.
* Copyright (c) 2021 Marius Scholtz, RIC Electronics
* Copyright (c) 2023 Hein Wessels, Nobleo Technology
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT st_stm32_adc
#include <errno.h>
#include <zephyr/drivers/adc.h>
#include <zephyr/drivers/pinctrl.h>
#include <zephyr/device.h>
#include <zephyr/kernel.h>
#include <zephyr/init.h>
#include <soc.h>
#include <zephyr/pm/device.h>
#include <zephyr/pm/policy.h>
#include <stm32_ll_adc.h>
#if defined(CONFIG_SOC_SERIES_STM32U5X)
#include <stm32_ll_pwr.h>
#endif /* CONFIG_SOC_SERIES_STM32U5X */
#ifdef CONFIG_ADC_STM32_DMA
#include <zephyr/drivers/dma/dma_stm32.h>
#include <zephyr/drivers/dma.h>
#include <zephyr/toolchain.h>
#include <stm32_ll_dma.h>
#endif
#define ADC_CONTEXT_USES_KERNEL_TIMER
#define ADC_CONTEXT_ENABLE_ON_COMPLETE
#include "adc_context.h"
#define LOG_LEVEL CONFIG_ADC_LOG_LEVEL
#include <zephyr/logging/log.h>
LOG_MODULE_REGISTER(adc_stm32);
#include <zephyr/drivers/clock_control/stm32_clock_control.h>
#include <zephyr/dt-bindings/adc/stm32_adc.h>
#include <zephyr/irq.h>
#include <zephyr/mem_mgmt/mem_attr.h>
#ifdef CONFIG_SOC_SERIES_STM32H7X
#include <zephyr/dt-bindings/memory-attr/memory-attr-arm.h>
#endif
#ifdef CONFIG_NOCACHE_MEMORY
#include <zephyr/linker/linker-defs.h>
#elif defined(CONFIG_CACHE_MANAGEMENT)
#include <zephyr/arch/cache.h>
#endif /* CONFIG_NOCACHE_MEMORY */
#if defined(CONFIG_SOC_SERIES_STM32F3X)
#if defined(ADC1_V2_5)
/* ADC1_V2_5 is the ADC version for STM32F37x */
#define STM32F3X_ADC_V2_5
#elif defined(ADC5_V1_1)
/* ADC5_V1_1 is the ADC version for other STM32F3x */
#define STM32F3X_ADC_V1_1
#endif
#endif
/*
* Other ADC versions:
* ADC_VER_V5_V90 -> STM32H72x/H73x
* ADC_VER_V5_X -> STM32H74x/H75x && U5
* ADC_VER_V5_3 -> STM32H7Ax/H7Bx
* compat st_stm32f1_adc -> STM32F1, F37x (ADC1_V2_5)
* compat st_stm32f4_adc -> STM32F2, F4, F7, L1
*/
#define ANY_NUM_COMMON_SAMPLING_TIME_CHANNELS_IS(value) \
(DT_INST_FOREACH_STATUS_OKAY_VARGS(IS_EQ_PROP_OR, \
num_sampling_time_common_channels,\
0, value) 0)
#define ANY_ADC_SEQUENCER_TYPE_IS(value) \
(DT_INST_FOREACH_STATUS_OKAY_VARGS(IS_EQ_PROP_OR, \
st_adc_sequencer,\
0, value) 0)
#define IS_EQ_PROP_OR(inst, prop, default_value, compare_value) \
IS_EQ(DT_INST_PROP_OR(inst, prop, default_value), compare_value) ||
/* reference voltage for the ADC */
#define STM32_ADC_VREF_MV DT_INST_PROP(0, vref_mv)
#if ANY_ADC_SEQUENCER_TYPE_IS(FULLY_CONFIGURABLE)
#define RANK(n) LL_ADC_REG_RANK_##n
static const uint32_t table_rank[] = {
RANK(1),
RANK(2),
RANK(3),
RANK(4),
RANK(5),
RANK(6),
RANK(7),
RANK(8),
RANK(9),
RANK(10),
RANK(11),
RANK(12),
RANK(13),
RANK(14),
RANK(15),
RANK(16),
#if defined(LL_ADC_REG_RANK_17)
RANK(17),
RANK(18),
RANK(19),
RANK(20),
RANK(21),
RANK(22),
RANK(23),
RANK(24),
RANK(25),
RANK(26),
RANK(27),
#if defined(LL_ADC_REG_RANK_28)
RANK(28),
#endif /* LL_ADC_REG_RANK_28 */
#endif /* LL_ADC_REG_RANK_17 */
};
#define SEQ_LEN(n) LL_ADC_REG_SEQ_SCAN_ENABLE_##n##RANKS
/* Length of this array signifies the maximum sequence length */
static const uint32_t table_seq_len[] = {
LL_ADC_REG_SEQ_SCAN_DISABLE,
SEQ_LEN(2),
SEQ_LEN(3),
SEQ_LEN(4),
SEQ_LEN(5),
SEQ_LEN(6),
SEQ_LEN(7),
SEQ_LEN(8),
SEQ_LEN(9),
SEQ_LEN(10),
SEQ_LEN(11),
SEQ_LEN(12),
SEQ_LEN(13),
SEQ_LEN(14),
SEQ_LEN(15),
SEQ_LEN(16),
#if defined(LL_ADC_REG_SEQ_SCAN_ENABLE_17RANKS)
SEQ_LEN(17),
SEQ_LEN(18),
SEQ_LEN(19),
SEQ_LEN(20),
SEQ_LEN(21),
SEQ_LEN(22),
SEQ_LEN(23),
SEQ_LEN(24),
SEQ_LEN(25),
SEQ_LEN(26),
SEQ_LEN(27),
#if defined(LL_ADC_REG_SEQ_SCAN_ENABLE_28RANKS)
SEQ_LEN(28),
#endif /* LL_ADC_REG_SEQ_SCAN_ENABLE_28RANKS */
#endif /* LL_ADC_REG_SEQ_SCAN_ENABLE_17RANKS */
};
#endif /* ANY_ADC_SEQUENCER_TYPE_IS(FULLY_CONFIGURABLE) */
/* Number of different sampling time values */
#define STM32_NB_SAMPLING_TIME 8
#ifdef CONFIG_ADC_STM32_DMA
struct stream {
const struct device *dma_dev;
uint32_t channel;
struct dma_config dma_cfg;
struct dma_block_config dma_blk_cfg;
uint8_t priority;
bool src_addr_increment;
bool dst_addr_increment;
};
#endif /* CONFIG_ADC_STM32_DMA */
struct adc_stm32_data {
struct adc_context ctx;
const struct device *dev;
uint16_t *buffer;
uint16_t *repeat_buffer;
uint8_t resolution;
uint32_t channels;
uint8_t channel_count;
uint8_t samples_count;
int8_t acq_time_index[2];
#ifdef CONFIG_ADC_STM32_DMA
volatile int dma_error;
struct stream dma;
#endif
};
struct adc_stm32_cfg {
ADC_TypeDef *base;
void (*irq_cfg_func)(void);
const struct stm32_pclken *pclken;
size_t pclk_len;
uint32_t clk_prescaler;
const struct pinctrl_dev_config *pcfg;
const uint16_t sampling_time_table[STM32_NB_SAMPLING_TIME];
int8_t num_sampling_time_common_channels;
int8_t sequencer_type;
int8_t res_table_size;
const uint32_t res_table[];
};
#ifdef CONFIG_ADC_STM32_DMA
static void adc_stm32_enable_dma_support(ADC_TypeDef *adc)
{
/* Allow ADC to create DMA request and set to one-shot mode as implemented in HAL drivers */
#if defined(CONFIG_SOC_SERIES_STM32H7X)
#if defined(ADC_VER_V5_V90)
if (adc == ADC3) {
LL_ADC_REG_SetDMATransferMode(adc, LL_ADC3_REG_DMA_TRANSFER_LIMITED);
} else {
LL_ADC_REG_SetDataTransferMode(adc, LL_ADC_REG_DMA_TRANSFER_LIMITED);
}
#elif defined(ADC_VER_V5_X)
LL_ADC_REG_SetDataTransferMode(adc, LL_ADC_REG_DMA_TRANSFER_LIMITED);
#else
#error "Unsupported ADC version"
#endif
#elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) /* defined(CONFIG_SOC_SERIES_STM32H7X) */
#error "The STM32F1 ADC + DMA is not yet supported"
#elif defined(CONFIG_SOC_SERIES_STM32U5X) /* DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) */
if (adc == ADC4) {
LL_ADC_REG_SetDMATransfer(adc, LL_ADC_REG_DMA_TRANSFER_LIMITED_ADC4);
} else {
LL_ADC_REG_SetDataTransferMode(adc, LL_ADC_REG_DMA_TRANSFER_LIMITED);
}
#else /* defined(CONFIG_SOC_SERIES_STM32U5X) */
/* Default mechanism for other MCUs */
LL_ADC_REG_SetDMATransfer(adc, LL_ADC_REG_DMA_TRANSFER_LIMITED);
#endif
}
static int adc_stm32_dma_start(const struct device *dev,
void *buffer, size_t channel_count)
{
const struct adc_stm32_cfg *config = dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
struct adc_stm32_data *data = dev->data;
struct dma_block_config *blk_cfg;
int ret;
struct stream *dma = &data->dma;
blk_cfg = &dma->dma_blk_cfg;
/* prepare the block */
blk_cfg->block_size = channel_count * sizeof(int16_t);
/* Source and destination */
blk_cfg->source_address = (uint32_t)LL_ADC_DMA_GetRegAddr(adc, LL_ADC_DMA_REG_REGULAR_DATA);
blk_cfg->source_addr_adj = DMA_ADDR_ADJ_NO_CHANGE;
blk_cfg->source_reload_en = 0;
blk_cfg->dest_address = (uint32_t)buffer;
blk_cfg->dest_addr_adj = DMA_ADDR_ADJ_INCREMENT;
blk_cfg->dest_reload_en = 0;
/* Manually set the FIFO threshold to 1/4 because the
* dmamux DTS entry does not contain fifo threshold
*/
blk_cfg->fifo_mode_control = 0;
/* direction is given by the DT */
dma->dma_cfg.head_block = blk_cfg;
dma->dma_cfg.user_data = data;
ret = dma_config(data->dma.dma_dev, data->dma.channel,
&dma->dma_cfg);
if (ret != 0) {
LOG_ERR("Problem setting up DMA: %d", ret);
return ret;
}
adc_stm32_enable_dma_support(adc);
data->dma_error = 0;
ret = dma_start(data->dma.dma_dev, data->dma.channel);
if (ret != 0) {
LOG_ERR("Problem starting DMA: %d", ret);
return ret;
}
LOG_DBG("DMA started");
return ret;
}
#endif /* CONFIG_ADC_STM32_DMA */
#if defined(CONFIG_ADC_STM32_DMA) && defined(CONFIG_SOC_SERIES_STM32H7X)
/* Returns true if given buffer is in a non-cacheable SRAM region.
* This is determined using the device tree, meaning the .nocache region won't work.
* The entire buffer must be in a single region.
* An example of how the SRAM region can be defined in the DTS:
* &sram4 {
* zephyr,memory-attr = <( DT_MEM_ARM(ATTR_MPU_RAM_NOCACHE) | ... )>;
* };
*/
static bool buf_in_nocache(uintptr_t buf, size_t len_bytes)
{
bool buf_within_nocache = false;
#ifdef CONFIG_NOCACHE_MEMORY
buf_within_nocache = (buf >= ((uintptr_t)_nocache_ram_start)) &&
((buf + len_bytes - 1) <= ((uintptr_t)_nocache_ram_end));
if (buf_within_nocache) {
return true;
}
#endif /* CONFIG_NOCACHE_MEMORY */
buf_within_nocache = mem_attr_check_buf(
(void *)buf, len_bytes, DT_MEM_ARM(ATTR_MPU_RAM_NOCACHE)) == 0;
return buf_within_nocache;
}
#endif /* defined(CONFIG_ADC_STM32_DMA) && defined(CONFIG_SOC_SERIES_STM32H7X) */
static int check_buffer(const struct adc_sequence *sequence,
uint8_t active_channels)
{
size_t needed_buffer_size;
needed_buffer_size = active_channels * sizeof(uint16_t);
if (sequence->options) {
needed_buffer_size *= (1 + sequence->options->extra_samplings);
}
if (sequence->buffer_size < needed_buffer_size) {
LOG_ERR("Provided buffer is too small (%u/%u)",
sequence->buffer_size, needed_buffer_size);
return -ENOMEM;
}
#if defined(CONFIG_ADC_STM32_DMA) && defined(CONFIG_SOC_SERIES_STM32H7X)
/* Buffer is forced to be in non-cacheable SRAM region to avoid cache maintenance */
if (!buf_in_nocache((uintptr_t)sequence->buffer, needed_buffer_size)) {
LOG_ERR("Supplied buffer is not in a non-cacheable region according to DTS.");
return -EINVAL;
}
#endif
return 0;
}
/*
* Enable ADC peripheral, and wait until ready if required by SOC.
*/
static int adc_stm32_enable(ADC_TypeDef *adc)
{
if (LL_ADC_IsEnabled(adc) == 1UL) {
return 0;
}
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
LL_ADC_ClearFlag_ADRDY(adc);
LL_ADC_Enable(adc);
/*
* Enabling ADC modules in many series may fail if they are
* still not stabilized, this will wait for a short time (about 1ms)
* to ensure ADC modules are properly enabled.
*/
uint32_t count_timeout = 0;
while (LL_ADC_IsActiveFlag_ADRDY(adc) == 0) {
#ifdef CONFIG_SOC_SERIES_STM32F0X
/* For F0, continue to write ADEN=1 until ADRDY=1 */
if (LL_ADC_IsEnabled(adc) == 0UL) {
LL_ADC_Enable(adc);
}
#endif /* CONFIG_SOC_SERIES_STM32F0X */
count_timeout++;
k_busy_wait(100);
if (count_timeout >= 10) {
return -ETIMEDOUT;
}
}
#else
/*
* On STM32F1, F2, F37x, F4, F7 and L1, do not re-enable the ADC.
* On F1 and F37x if ADON holds 1 (LL_ADC_IsEnabled is true) and 1 is
* written, then conversion starts. That's not what is expected.
*/
LL_ADC_Enable(adc);
#endif
return 0;
}
static void adc_stm32_start_conversion(const struct device *dev)
{
const struct adc_stm32_cfg *config = dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
LOG_DBG("Starting conversion");
#if !defined(CONFIG_SOC_SERIES_STM32F1X) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
LL_ADC_REG_StartConversion(adc);
#else
LL_ADC_REG_StartConversionSWStart(adc);
#endif
}
/*
* Disable ADC peripheral, and wait until it is disabled
*/
static void adc_stm32_disable(ADC_TypeDef *adc)
{
if (LL_ADC_IsEnabled(adc) != 1UL) {
return;
}
/* Stop ongoing conversion if any
* Software must poll ADSTART (or JADSTART) until the bit is reset before assuming
* the ADC is completely stopped.
*/
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
if (LL_ADC_REG_IsConversionOngoing(adc)) {
LL_ADC_REG_StopConversion(adc);
while (LL_ADC_REG_IsConversionOngoing(adc)) {
}
}
#endif
#if !defined(CONFIG_SOC_SERIES_STM32C0X) && \
!defined(CONFIG_SOC_SERIES_STM32F0X) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc) && \
!defined(CONFIG_SOC_SERIES_STM32G0X) && \
!defined(CONFIG_SOC_SERIES_STM32L0X) && \
!defined(CONFIG_SOC_SERIES_STM32WBAX) && \
!defined(CONFIG_SOC_SERIES_STM32WLX)
if (LL_ADC_INJ_IsConversionOngoing(adc)) {
LL_ADC_INJ_StopConversion(adc);
while (LL_ADC_INJ_IsConversionOngoing(adc)) {
}
}
#endif
LL_ADC_Disable(adc);
/* Wait ADC is fully disabled so that we don't leave the driver into intermediate state
* which could prevent enabling the peripheral
*/
while (LL_ADC_IsEnabled(adc) == 1UL) {
}
}
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
#define HAS_CALIBRATION
/* Number of ADC clock cycles to wait before of after starting calibration */
#if defined(LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES)
#define ADC_DELAY_CALIB_ADC_CYCLES LL_ADC_DELAY_CALIB_ENABLE_ADC_CYCLES
#elif defined(LL_ADC_DELAY_ENABLE_CALIB_ADC_CYCLES)
#define ADC_DELAY_CALIB_ADC_CYCLES LL_ADC_DELAY_ENABLE_CALIB_ADC_CYCLES
#elif defined(LL_ADC_DELAY_DISABLE_CALIB_ADC_CYCLES)
#define ADC_DELAY_CALIB_ADC_CYCLES LL_ADC_DELAY_DISABLE_CALIB_ADC_CYCLES
#endif
static void adc_stm32_calibration_delay(const struct device *dev)
{
/*
* Calibration of F1 and F3 (ADC1_V2_5) must start two cycles after ADON
* is set.
* Other ADC modules have to wait for some cycles after calibration to
* be enabled.
*/
const struct adc_stm32_cfg *config = dev->config;
const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
uint32_t adc_rate, wait_cycles;
if (clock_control_get_rate(clk,
(clock_control_subsys_t) &config->pclken[0], &adc_rate) < 0) {
LOG_ERR("ADC clock rate get error.");
}
if (adc_rate == 0) {
LOG_ERR("ADC Clock rate null");
return;
}
wait_cycles = SystemCoreClock / adc_rate *
ADC_DELAY_CALIB_ADC_CYCLES;
for (int i = wait_cycles; i >= 0; i--) {
}
}
static void adc_stm32_calibration_start(const struct device *dev)
{
const struct adc_stm32_cfg *config =
(const struct adc_stm32_cfg *)dev->config;
ADC_TypeDef *adc = config->base;
#if defined(STM32F3X_ADC_V1_1) || \
defined(CONFIG_SOC_SERIES_STM32L4X) || \
defined(CONFIG_SOC_SERIES_STM32L5X) || \
defined(CONFIG_SOC_SERIES_STM32H5X) || \
defined(CONFIG_SOC_SERIES_STM32WBX) || \
defined(CONFIG_SOC_SERIES_STM32G4X)
LL_ADC_StartCalibration(adc, LL_ADC_SINGLE_ENDED);
#elif defined(CONFIG_SOC_SERIES_STM32C0X) || \
defined(CONFIG_SOC_SERIES_STM32F0X) || \
DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) || \
defined(CONFIG_SOC_SERIES_STM32G0X) || \
defined(CONFIG_SOC_SERIES_STM32L0X) || \
defined(CONFIG_SOC_SERIES_STM32WLX) || \
defined(CONFIG_SOC_SERIES_STM32WBAX)
LL_ADC_StartCalibration(adc);
#elif defined(CONFIG_SOC_SERIES_STM32U5X)
LL_ADC_StartCalibration(adc, LL_ADC_CALIB_OFFSET);
#elif defined(CONFIG_SOC_SERIES_STM32H7X)
LL_ADC_StartCalibration(adc, LL_ADC_CALIB_OFFSET, LL_ADC_SINGLE_ENDED);
#endif
/* Make sure ADCAL is cleared before returning for proper operations
* on the ADC control register, for enabling the peripheral for example
*/
while (LL_ADC_IsCalibrationOnGoing(adc)) {
}
}
static int adc_stm32_calibrate(const struct device *dev)
{
const struct adc_stm32_cfg *config =
(const struct adc_stm32_cfg *)dev->config;
ADC_TypeDef *adc = config->base;
int err;
#if defined(CONFIG_ADC_STM32_DMA)
#if defined(CONFIG_SOC_SERIES_STM32C0X) || \
defined(CONFIG_SOC_SERIES_STM32F0X) || \
defined(CONFIG_SOC_SERIES_STM32G0X) || \
defined(CONFIG_SOC_SERIES_STM32L0X) || \
defined(CONFIG_SOC_SERIES_STM32WBAX) || \
defined(CONFIG_SOC_SERIES_STM32WLX)
/* Make sure DMA is disabled before starting calibration */
LL_ADC_REG_SetDMATransfer(adc, LL_ADC_REG_DMA_TRANSFER_NONE);
#elif defined(CONFIG_SOC_SERIES_STM32U5X)
if (adc == ADC4) {
/* Make sure DMA is disabled before starting calibration */
LL_ADC_REG_SetDMATransfer(adc, LL_ADC_REG_DMA_TRANSFER_NONE);
}
#endif /* CONFIG_SOC_SERIES_* */
#endif /* CONFIG_ADC_STM32_DMA */
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
adc_stm32_disable(adc);
adc_stm32_calibration_start(dev);
adc_stm32_calibration_delay(dev);
#endif /* !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) */
err = adc_stm32_enable(adc);
if (err < 0) {
return err;
}
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
adc_stm32_calibration_delay(dev);
adc_stm32_calibration_start(dev);
#endif /* DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) */
#if defined(CONFIG_SOC_SERIES_STM32H7X) && \
defined(CONFIG_CPU_CORTEX_M7)
/*
* To ensure linearity the factory calibration values
* should be loaded on initialization.
*/
uint32_t channel_offset = 0U;
uint32_t linear_calib_buffer = 0U;
if (adc == ADC1) {
channel_offset = 0UL;
} else if (adc == ADC2) {
channel_offset = 8UL;
} else /*Case ADC3*/ {
channel_offset = 16UL;
}
/* Read factory calibration factors */
for (uint32_t count = 0UL; count < ADC_LINEAR_CALIB_REG_COUNT; count++) {
linear_calib_buffer = *(uint32_t *)(
ADC_LINEAR_CALIB_REG_1_ADDR + channel_offset + count
);
LL_ADC_SetCalibrationLinearFactor(
adc, LL_ADC_CALIB_LINEARITY_WORD1 << count,
linear_calib_buffer
);
}
#endif /* CONFIG_SOC_SERIES_STM32H7X */
return 0;
}
#endif /* !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc) */
#if !defined(CONFIG_SOC_SERIES_STM32F0X) && \
!defined(CONFIG_SOC_SERIES_STM32F1X) && \
!defined(CONFIG_SOC_SERIES_STM32F3X) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
#define HAS_OVERSAMPLING
#define OVS_SHIFT(n) LL_ADC_OVS_SHIFT_RIGHT_##n
static const uint32_t table_oversampling_shift[] = {
LL_ADC_OVS_SHIFT_NONE,
OVS_SHIFT(1),
OVS_SHIFT(2),
OVS_SHIFT(3),
OVS_SHIFT(4),
OVS_SHIFT(5),
OVS_SHIFT(6),
OVS_SHIFT(7),
OVS_SHIFT(8),
#if defined(CONFIG_SOC_SERIES_STM32H7X) || \
defined(CONFIG_SOC_SERIES_STM32U5X)
OVS_SHIFT(9),
OVS_SHIFT(10),
#endif
};
#ifdef LL_ADC_OVS_RATIO_2
#define OVS_RATIO(n) LL_ADC_OVS_RATIO_##n
static const uint32_t table_oversampling_ratio[] = {
0,
OVS_RATIO(2),
OVS_RATIO(4),
OVS_RATIO(8),
OVS_RATIO(16),
OVS_RATIO(32),
OVS_RATIO(64),
OVS_RATIO(128),
OVS_RATIO(256),
};
#endif
/*
* Function to configure the oversampling scope. It is basically a wrapper over
* LL_ADC_SetOverSamplingScope() which in addition stops the ADC if needed.
*/
static void adc_stm32_oversampling_scope(ADC_TypeDef *adc, uint32_t ovs_scope)
{
#if defined(CONFIG_SOC_SERIES_STM32G0X) || \
defined(CONFIG_SOC_SERIES_STM32L0X) || \
defined(CONFIG_SOC_SERIES_STM32WLX)
/*
* Setting OVS bits is conditioned to ADC state: ADC must be disabled
* or enabled without conversion on going : disable it, it will stop.
* For the G0 series, ADC must be disabled to prevent CKMODE bitfield
* from getting reset, see errata ES0418 section 2.6.4.
*/
if (LL_ADC_GetOverSamplingScope(adc) == ovs_scope) {
return;
}
adc_stm32_disable(adc);
#endif
LL_ADC_SetOverSamplingScope(adc, ovs_scope);
}
/*
* Function to configure the oversampling ratio and shift. It is basically a
* wrapper over LL_ADC_SetOverSamplingRatioShift() which in addition stops the
* ADC if needed.
*/
static void adc_stm32_oversampling_ratioshift(ADC_TypeDef *adc, uint32_t ratio, uint32_t shift)
{
/*
* setting OVS bits is conditioned to ADC state: ADC must be disabled
* or enabled without conversion on going : disable it, it will stop
*/
if ((LL_ADC_GetOverSamplingRatio(adc) == ratio)
&& (LL_ADC_GetOverSamplingShift(adc) == shift)) {
return;
}
adc_stm32_disable(adc);
LL_ADC_ConfigOverSamplingRatioShift(adc, ratio, shift);
}
/*
* Function to configure the oversampling ratio and shift using stm32 LL
* ratio is directly the sequence->oversampling (a 2^n value)
* shift is the corresponding LL_ADC_OVS_SHIFT_RIGHT_x constant
*/
static int adc_stm32_oversampling(ADC_TypeDef *adc, uint8_t ratio)
{
if (ratio == 0) {
adc_stm32_oversampling_scope(adc, LL_ADC_OVS_DISABLE);
return 0;
} else if (ratio < ARRAY_SIZE(table_oversampling_shift)) {
adc_stm32_oversampling_scope(adc, LL_ADC_OVS_GRP_REGULAR_CONTINUED);
} else {
LOG_ERR("Invalid oversampling");
return -EINVAL;
}
uint32_t shift = table_oversampling_shift[ratio];
#if defined(CONFIG_SOC_SERIES_STM32H7X)
/* Certain variants of the H7, such as STM32H72x/H73x has ADC3
* as a separate entity and require special handling.
*/
#if defined(ADC_VER_V5_V90)
if (adc != ADC3) {
/* the LL function expects a value from 1 to 1024 */
adc_stm32_oversampling_ratioshift(adc, 1 << ratio, shift);
} else {
/* the LL function expects a value LL_ADC_OVS_RATIO_x */
adc_stm32_oversampling_ratioshift(adc, table_oversampling_ratio[ratio], shift);
}
#else
/* the LL function expects a value from 1 to 1024 */
adc_stm32_oversampling_ratioshift(adc, 1 << ratio, shift);
#endif /* defined(ADC_VER_V5_V90) */
#elif defined(CONFIG_SOC_SERIES_STM32U5X)
if (adc != ADC4) {
/* the LL function expects a value from 1 to 1024 */
adc_stm32_oversampling_ratioshift(adc, (1 << ratio), shift);
} else {
/* the LL function expects a value LL_ADC_OVS_RATIO_x */
adc_stm32_oversampling_ratioshift(adc, table_oversampling_ratio[ratio], shift);
}
#else /* CONFIG_SOC_SERIES_STM32H7X */
adc_stm32_oversampling_ratioshift(adc, table_oversampling_ratio[ratio], shift);
#endif /* CONFIG_SOC_SERIES_STM32H7X */
return 0;
}
#endif /* CONFIG_SOC_SERIES_STM32xxx */
#ifdef CONFIG_ADC_STM32_DMA
static void dma_callback(const struct device *dev, void *user_data,
uint32_t channel, int status)
{
/* user_data directly holds the adc device */
struct adc_stm32_data *data = user_data;
const struct adc_stm32_cfg *config = data->dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
LOG_DBG("dma callback");
if (channel == data->dma.channel) {
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
if (LL_ADC_IsActiveFlag_OVR(adc) || (status >= 0)) {
#else
if (status >= 0) {
#endif /* !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) */
data->samples_count = data->channel_count;
data->buffer += data->channel_count;
/* Stop the DMA engine, only to start it again when the callback returns
* ADC_ACTION_REPEAT or ADC_ACTION_CONTINUE, or the number of samples
* haven't been reached Starting the DMA engine is done
* within adc_context_start_sampling
*/
dma_stop(data->dma.dma_dev, data->dma.channel);
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
LL_ADC_ClearFlag_OVR(adc);
#endif /* !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) */
/* No need to invalidate the cache because it's assumed that
* the address is in a non-cacheable SRAM region.
*/
adc_context_on_sampling_done(&data->ctx, dev);
pm_policy_state_lock_put(PM_STATE_SUSPEND_TO_IDLE,
PM_ALL_SUBSTATES);
if (IS_ENABLED(CONFIG_PM_S2RAM)) {
pm_policy_state_lock_put(PM_STATE_SUSPEND_TO_RAM,
PM_ALL_SUBSTATES);
}
} else if (status < 0) {
LOG_ERR("DMA sampling complete, but DMA reported error %d", status);
data->dma_error = status;
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
LL_ADC_REG_StopConversion(adc);
#endif
dma_stop(data->dma.dma_dev, data->dma.channel);
adc_context_complete(&data->ctx, status);
}
}
}
#endif /* CONFIG_ADC_STM32_DMA */
static uint8_t get_reg_value(const struct device *dev, uint32_t reg,
uint32_t shift, uint32_t mask)
{
const struct adc_stm32_cfg *config = dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
uintptr_t addr = (uintptr_t)adc + reg;
return ((*(volatile uint32_t *)addr >> shift) & mask);
}
static void set_reg_value(const struct device *dev, uint32_t reg,
uint32_t shift, uint32_t mask, uint32_t value)
{
const struct adc_stm32_cfg *config = dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
uintptr_t addr = (uintptr_t)adc + reg;
MODIFY_REG(*(volatile uint32_t *)addr, (mask << shift), (value << shift));
}
static int set_resolution(const struct device *dev,
const struct adc_sequence *sequence)
{
const struct adc_stm32_cfg *config = dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
uint8_t res_reg_addr = 0xFF;
uint8_t res_shift = 0;
uint8_t res_mask = 0;
uint8_t res_reg_val = 0;
int i;
for (i = 0; i < config->res_table_size; i++) {
if (sequence->resolution == STM32_ADC_GET_REAL_VAL(config->res_table[i])) {
res_reg_addr = STM32_ADC_GET_REG(config->res_table[i]);
res_shift = STM32_ADC_GET_SHIFT(config->res_table[i]);
res_mask = STM32_ADC_GET_MASK(config->res_table[i]);
res_reg_val = STM32_ADC_GET_REG_VAL(config->res_table[i]);
break;
}
}
if (i == config->res_table_size) {
LOG_ERR("Invalid resolution");
return -EINVAL;
}
/*
* Some MCUs (like STM32F1x) have no register to configure resolution.
* These MCUs have a register address value of 0xFF and should be
* ignored.
*/
if (res_reg_addr != 0xFF) {
/*
* We don't use LL_ADC_SetResolution and LL_ADC_GetResolution
* because they don't strictly use hardware resolution values
* and makes internal conversions for some series.
* (see stm32h7xx_ll_adc.h)
* Instead we set the register ourselves if needed.
*/
if (get_reg_value(dev, res_reg_addr, res_shift, res_mask) != res_reg_val) {
/*
* Writing ADC_CFGR1 register while ADEN bit is set
* resets RES[1:0] bitfield. We need to disable and enable adc.
*/
adc_stm32_disable(adc);
set_reg_value(dev, res_reg_addr, res_shift, res_mask, res_reg_val);
}
}
return 0;
}
static int set_sequencer(const struct device *dev)
{
const struct adc_stm32_cfg *config = dev->config;
struct adc_stm32_data *data = dev->data;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
uint8_t channel_id;
uint8_t channel_index = 0;
uint32_t channels_mask = 0;
/* Iterate over selected channels in bitmask keeping track of:
* - channel_index: ranging from 0 -> ( data->channel_count - 1 )
* - channel_id: ordinal position of channel in data->channels bitmask
*/
for (uint32_t channels = data->channels; channels;
channels &= ~BIT(channel_id), channel_index++) {
channel_id = find_lsb_set(channels) - 1;
uint32_t channel = __LL_ADC_DECIMAL_NB_TO_CHANNEL(channel_id);
channels_mask |= channel;
#if ANY_ADC_SEQUENCER_TYPE_IS(FULLY_CONFIGURABLE)
if (config->sequencer_type == FULLY_CONFIGURABLE) {
#if defined(CONFIG_SOC_SERIES_STM32H7X) || defined(CONFIG_SOC_SERIES_STM32U5X)
/*
* Each channel in the sequence must be previously enabled in PCSEL.
* This register controls the analog switch integrated in the IO level.
*/
LL_ADC_SetChannelPreselection(adc, channel);
#endif /* CONFIG_SOC_SERIES_STM32H7X || CONFIG_SOC_SERIES_STM32U5X */
LL_ADC_REG_SetSequencerRanks(adc, table_rank[channel_index], channel);
LL_ADC_REG_SetSequencerLength(adc, table_seq_len[channel_index]);
}
#endif /* ANY_ADC_SEQUENCER_TYPE_IS(FULLY_CONFIGURABLE) */
}
#if ANY_ADC_SEQUENCER_TYPE_IS(NOT_FULLY_CONFIGURABLE)
if (config->sequencer_type == NOT_FULLY_CONFIGURABLE) {
LL_ADC_REG_SetSequencerChannels(adc, channels_mask);
#if !defined(CONFIG_SOC_SERIES_STM32F0X) && \
!defined(CONFIG_SOC_SERIES_STM32L0X) && \
!defined(CONFIG_SOC_SERIES_STM32U5X) && \
!defined(CONFIG_SOC_SERIES_STM32WBAX)
/*
* After modifying sequencer it is mandatory to wait for the
* assertion of CCRDY flag
*/
while (LL_ADC_IsActiveFlag_CCRDY(adc) == 0) {
}
LL_ADC_ClearFlag_CCRDY(adc);
#endif /* !CONFIG_SOC_SERIES_STM32F0X && !L0X && !U5X && !WBAX */
}
#endif /* ANY_ADC_SEQUENCER_TYPE_IS(NOT_FULLY_CONFIGURABLE) */
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) || \
DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
LL_ADC_SetSequencersScanMode(adc, LL_ADC_SEQ_SCAN_ENABLE);
#endif /* st_stm32f1_adc || st_stm32f4_adc */
return 0;
}
static int start_read(const struct device *dev,
const struct adc_sequence *sequence)
{
const struct adc_stm32_cfg *config = dev->config;
struct adc_stm32_data *data = dev->data;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
int err;
data->buffer = sequence->buffer;
data->channels = sequence->channels;
data->channel_count = POPCOUNT(data->channels);
data->samples_count = 0;
if (data->channel_count == 0) {
LOG_ERR("No channels selected");
return -EINVAL;
}
#if ANY_ADC_SEQUENCER_TYPE_IS(FULLY_CONFIGURABLE)
if (data->channel_count > ARRAY_SIZE(table_seq_len)) {
LOG_ERR("Too many channels for sequencer. Max: %d", ARRAY_SIZE(table_seq_len));
return -EINVAL;
}
#endif /* ANY_ADC_SEQUENCER_TYPE_IS(FULLY_CONFIGURABLE) */
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) && !defined(CONFIG_ADC_STM32_DMA)
/* Multiple samplings is only supported with DMA for F1 */
if (data->channel_count > 1) {
LOG_ERR("Without DMA, this device only supports single channel sampling");
return -EINVAL;
}
#endif /* DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) && !CONFIG_ADC_STM32_DMA */
/* Check and set the resolution */
err = set_resolution(dev, sequence);
if (err < 0) {
return err;
}
/* Configure the sequencer */
err = set_sequencer(dev);
if (err < 0) {
return err;
}
err = check_buffer(sequence, data->channel_count);
if (err) {
return err;
}
#ifdef HAS_OVERSAMPLING
err = adc_stm32_oversampling(adc, sequence->oversampling);
if (err) {
return err;
}
#else
if (sequence->oversampling) {
LOG_ERR("Oversampling not supported");
return -ENOTSUP;
}
#endif /* HAS_OVERSAMPLING */
if (sequence->calibrate) {
#if defined(HAS_CALIBRATION)
adc_stm32_calibrate(dev);
#else
LOG_ERR("Calibration not supported");
return -ENOTSUP;
#endif
}
/*
* Make sure the ADC is enabled as it might have been disabled earlier
* to set the resolution, to set the oversampling or to perform the
* calibration.
*/
adc_stm32_enable(adc);
#if !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
LL_ADC_ClearFlag_OVR(adc);
#endif /* !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) */
#if !defined(CONFIG_ADC_STM32_DMA)
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
/* Trigger an ISR after each sampling (not just end of sequence) */
LL_ADC_REG_SetFlagEndOfConversion(adc, LL_ADC_REG_FLAG_EOC_UNITARY_CONV);
LL_ADC_EnableIT_EOCS(adc);
#elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
LL_ADC_EnableIT_EOS(adc);
#else
LL_ADC_EnableIT_EOC(adc);
#endif
#endif /* CONFIG_ADC_STM32_DMA */
/* This call will start the DMA */
adc_context_start_read(&data->ctx, sequence);
int result = adc_context_wait_for_completion(&data->ctx);
#ifdef CONFIG_ADC_STM32_DMA
/* check if there's anything wrong with dma start */
result = (data->dma_error ? data->dma_error : result);
#endif
return result;
}
static void adc_context_start_sampling(struct adc_context *ctx)
{
struct adc_stm32_data *data =
CONTAINER_OF(ctx, struct adc_stm32_data, ctx);
const struct device *dev = data->dev;
const struct adc_stm32_cfg *config = dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
/* Remove warning for some series */
ARG_UNUSED(adc);
data->repeat_buffer = data->buffer;
#ifdef CONFIG_ADC_STM32_DMA
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
/* Make sure DMA bit of ADC register CR2 is set to 0 before starting a DMA transfer */
LL_ADC_REG_SetDMATransfer(adc, LL_ADC_REG_DMA_TRANSFER_NONE);
#endif
adc_stm32_dma_start(dev, data->buffer, data->channel_count);
#endif
adc_stm32_start_conversion(dev);
}
static void adc_context_update_buffer_pointer(struct adc_context *ctx,
bool repeat_sampling)
{
struct adc_stm32_data *data =
CONTAINER_OF(ctx, struct adc_stm32_data, ctx);
if (repeat_sampling) {
data->buffer = data->repeat_buffer;
}
}
#ifndef CONFIG_ADC_STM32_DMA
static void adc_stm32_isr(const struct device *dev)
{
struct adc_stm32_data *data = dev->data;
const struct adc_stm32_cfg *config =
(const struct adc_stm32_cfg *)dev->config;
ADC_TypeDef *adc = config->base;
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
if (LL_ADC_IsActiveFlag_EOS(adc) == 1) {
#elif DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
if (LL_ADC_IsActiveFlag_EOCS(adc) == 1) {
#else
if (LL_ADC_IsActiveFlag_EOC(adc) == 1) {
#endif
*data->buffer++ = LL_ADC_REG_ReadConversionData32(adc);
/* ISR is triggered after each conversion, and at the end-of-sequence. */
if (++data->samples_count == data->channel_count) {
data->samples_count = 0;
adc_context_on_sampling_done(&data->ctx, dev);
pm_policy_state_lock_put(PM_STATE_SUSPEND_TO_IDLE,
PM_ALL_SUBSTATES);
if (IS_ENABLED(CONFIG_PM_S2RAM)) {
pm_policy_state_lock_put(PM_STATE_SUSPEND_TO_RAM,
PM_ALL_SUBSTATES);
}
}
}
LOG_DBG("%s ISR triggered.", dev->name);
}
#endif /* !CONFIG_ADC_STM32_DMA */
static void adc_context_on_complete(struct adc_context *ctx, int status)
{
struct adc_stm32_data *data =
CONTAINER_OF(ctx, struct adc_stm32_data, ctx);
const struct adc_stm32_cfg *config = data->dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
ARG_UNUSED(status);
/* Reset acquisition time used for the sequence */
data->acq_time_index[0] = -1;
data->acq_time_index[1] = -1;
#if defined(CONFIG_SOC_SERIES_STM32H7X) || defined(CONFIG_SOC_SERIES_STM32U5X)
/* Reset channel preselection register */
LL_ADC_SetChannelPreselection(adc, 0);
#else
ARG_UNUSED(adc);
#endif /* CONFIG_SOC_SERIES_STM32H7X || CONFIG_SOC_SERIES_STM32U5X */
}
static int adc_stm32_read(const struct device *dev,
const struct adc_sequence *sequence)
{
struct adc_stm32_data *data = dev->data;
int error;
adc_context_lock(&data->ctx, false, NULL);
pm_policy_state_lock_get(PM_STATE_SUSPEND_TO_IDLE, PM_ALL_SUBSTATES);
if (IS_ENABLED(CONFIG_PM_S2RAM)) {
pm_policy_state_lock_get(PM_STATE_SUSPEND_TO_RAM, PM_ALL_SUBSTATES);
}
error = start_read(dev, sequence);
adc_context_release(&data->ctx, error);
return error;
}
#ifdef CONFIG_ADC_ASYNC
static int adc_stm32_read_async(const struct device *dev,
const struct adc_sequence *sequence,
struct k_poll_signal *async)
{
struct adc_stm32_data *data = dev->data;
int error;
adc_context_lock(&data->ctx, true, async);
pm_policy_state_lock_get(PM_STATE_SUSPEND_TO_IDLE, PM_ALL_SUBSTATES);
if (IS_ENABLED(CONFIG_PM_S2RAM)) {
pm_policy_state_lock_get(PM_STATE_SUSPEND_TO_RAM, PM_ALL_SUBSTATES);
}
error = start_read(dev, sequence);
adc_context_release(&data->ctx, error);
return error;
}
#endif
static int adc_stm32_sampling_time_check(const struct device *dev, uint16_t acq_time)
{
const struct adc_stm32_cfg *config =
(const struct adc_stm32_cfg *)dev->config;
if (acq_time == ADC_ACQ_TIME_DEFAULT) {
return 0;
}
if (acq_time == ADC_ACQ_TIME_MAX) {
return STM32_NB_SAMPLING_TIME - 1;
}
for (int i = 0; i < STM32_NB_SAMPLING_TIME; i++) {
if (acq_time == ADC_ACQ_TIME(ADC_ACQ_TIME_TICKS,
config->sampling_time_table[i])) {
return i;
}
}
LOG_ERR("Sampling time value not supported.");
return -EINVAL;
}
static int adc_stm32_sampling_time_setup(const struct device *dev, uint8_t id,
uint16_t acq_time)
{
const struct adc_stm32_cfg *config =
(const struct adc_stm32_cfg *)dev->config;
ADC_TypeDef *adc = config->base;
struct adc_stm32_data *data = dev->data;
int acq_time_index;
acq_time_index = adc_stm32_sampling_time_check(dev, acq_time);
if (acq_time_index < 0) {
return acq_time_index;
}
/*
* For all series we use the fact that the macros LL_ADC_SAMPLINGTIME_*
* that should be passed to the set functions are all coded on 3 bits
* with 0 shift (ie 0 to 7). So acq_time_index is equivalent to the
* macro we would use for the desired sampling time.
*/
switch (config->num_sampling_time_common_channels) {
case 0:
#if ANY_NUM_COMMON_SAMPLING_TIME_CHANNELS_IS(0)
ARG_UNUSED(data);
LL_ADC_SetChannelSamplingTime(adc,
__LL_ADC_DECIMAL_NB_TO_CHANNEL(id),
(uint32_t)acq_time_index);
#endif
break;
case 1:
#if ANY_NUM_COMMON_SAMPLING_TIME_CHANNELS_IS(1)
/* Only one sampling time can be selected for all channels.
* The first one we find is used, all others must match.
*/
if ((data->acq_time_index[0] == -1) ||
(acq_time_index == data->acq_time_index[0])) {
/* Reg is empty or value matches */
data->acq_time_index[0] = acq_time_index;
LL_ADC_SetSamplingTimeCommonChannels(adc,
(uint32_t)acq_time_index);
} else {
/* Reg is used and value does not match */
LOG_ERR("Multiple sampling times not supported");
return -EINVAL;
}
#endif
break;
case 2:
#if ANY_NUM_COMMON_SAMPLING_TIME_CHANNELS_IS(2)
/* Two different sampling times can be selected for all channels.
* The first two we find are used, all others must match either one.
*/
if ((data->acq_time_index[0] == -1) ||
(acq_time_index == data->acq_time_index[0])) {
/* 1st reg is empty or value matches 1st reg */
data->acq_time_index[0] = acq_time_index;
LL_ADC_SetChannelSamplingTime(adc,
__LL_ADC_DECIMAL_NB_TO_CHANNEL(id),
LL_ADC_SAMPLINGTIME_COMMON_1);
LL_ADC_SetSamplingTimeCommonChannels(adc,
LL_ADC_SAMPLINGTIME_COMMON_1,
(uint32_t)acq_time_index);
} else if ((data->acq_time_index[1] == -1) ||
(acq_time_index == data->acq_time_index[1])) {
/* 2nd reg is empty or value matches 2nd reg */
data->acq_time_index[1] = acq_time_index;
LL_ADC_SetChannelSamplingTime(adc,
__LL_ADC_DECIMAL_NB_TO_CHANNEL(id),
LL_ADC_SAMPLINGTIME_COMMON_2);
LL_ADC_SetSamplingTimeCommonChannels(adc,
LL_ADC_SAMPLINGTIME_COMMON_2,
(uint32_t)acq_time_index);
} else {
/* Both regs are used, value does not match any of them */
LOG_ERR("Only two different sampling times supported");
return -EINVAL;
}
#endif
break;
default:
LOG_ERR("Number of common sampling time channels not supported");
return -EINVAL;
}
return 0;
}
static int adc_stm32_channel_setup(const struct device *dev,
const struct adc_channel_cfg *channel_cfg)
{
if (channel_cfg->differential) {
LOG_ERR("Differential channels are not supported");
return -EINVAL;
}
if (channel_cfg->gain != ADC_GAIN_1) {
LOG_ERR("Invalid channel gain");
return -EINVAL;
}
if (channel_cfg->reference != ADC_REF_INTERNAL) {
LOG_ERR("Invalid channel reference");
return -EINVAL;
}
if (adc_stm32_sampling_time_setup(dev, channel_cfg->channel_id,
channel_cfg->acquisition_time) != 0) {
LOG_ERR("Invalid sampling time");
return -EINVAL;
}
LOG_DBG("Channel setup succeeded!");
return 0;
}
/* This symbol takes the value 1 if one of the device instances */
/* is configured in dts with a domain clock */
#if STM32_DT_INST_DEV_DOMAIN_CLOCK_SUPPORT
#define STM32_ADC_DOMAIN_CLOCK_SUPPORT 1
#else
#define STM32_ADC_DOMAIN_CLOCK_SUPPORT 0
#endif
static int adc_stm32_set_clock(const struct device *dev)
{
const struct adc_stm32_cfg *config = dev->config;
const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
ARG_UNUSED(adc); /* Necessary to avoid warnings on some series */
if (clock_control_on(clk,
(clock_control_subsys_t) &config->pclken[0]) != 0) {
return -EIO;
}
if (IS_ENABLED(STM32_ADC_DOMAIN_CLOCK_SUPPORT) && (config->pclk_len > 1)) {
/* Enable ADC clock source */
if (clock_control_configure(clk,
(clock_control_subsys_t) &config->pclken[1],
NULL) != 0) {
return -EIO;
}
}
#if defined(CONFIG_SOC_SERIES_STM32F0X)
LL_ADC_SetClock(adc, config->clk_prescaler);
#elif defined(CONFIG_SOC_SERIES_STM32C0X) || \
defined(CONFIG_SOC_SERIES_STM32G0X) || \
defined(CONFIG_SOC_SERIES_STM32L0X) || \
(defined(CONFIG_SOC_SERIES_STM32WBX) && defined(ADC_SUPPORT_2_5_MSPS)) || \
defined(CONFIG_SOC_SERIES_STM32WLX)
if ((config->clk_prescaler == LL_ADC_CLOCK_SYNC_PCLK_DIV1) ||
(config->clk_prescaler == LL_ADC_CLOCK_SYNC_PCLK_DIV2) ||
(config->clk_prescaler == LL_ADC_CLOCK_SYNC_PCLK_DIV4)) {
LL_ADC_SetClock(adc, config->clk_prescaler);
} else {
LL_ADC_SetCommonClock(__LL_ADC_COMMON_INSTANCE(adc),
config->clk_prescaler);
LL_ADC_SetClock(adc, LL_ADC_CLOCK_ASYNC);
}
#elif !DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
LL_ADC_SetCommonClock(__LL_ADC_COMMON_INSTANCE(adc),
config->clk_prescaler);
#endif
return 0;
}
static int adc_stm32_init(const struct device *dev)
{
struct adc_stm32_data *data = dev->data;
const struct adc_stm32_cfg *config = dev->config;
const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
int err;
ARG_UNUSED(adc); /* Necessary to avoid warnings on some series */
LOG_DBG("Initializing %s", dev->name);
if (!device_is_ready(clk)) {
LOG_ERR("clock control device not ready");
return -ENODEV;
}
data->dev = dev;
/*
* For series that use common channels for sampling time, all
* conversion time for all channels on one ADC instance has to
* be the same.
* For series that use two common channels, there can be up to two
* conversion times selected for all channels in a sequence.
* This additional table is for checking that the conversion time
* selection of all channels respects these requirements.
*/
data->acq_time_index[0] = -1;
data->acq_time_index[1] = -1;
adc_stm32_set_clock(dev);
/* Configure dt provided device signals when available */
err = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_DEFAULT);
if (err < 0) {
LOG_ERR("ADC pinctrl setup failed (%d)", err);
return err;
}
#if defined(CONFIG_SOC_SERIES_STM32U5X)
/* Enable the independent analog supply */
LL_PWR_EnableVDDA();
#endif /* CONFIG_SOC_SERIES_STM32U5X */
#ifdef CONFIG_ADC_STM32_DMA
if ((data->dma.dma_dev != NULL) &&
!device_is_ready(data->dma.dma_dev)) {
LOG_ERR("%s device not ready", data->dma.dma_dev->name);
return -ENODEV;
}
#endif
#if defined(CONFIG_SOC_SERIES_STM32L4X) || \
defined(CONFIG_SOC_SERIES_STM32L5X) || \
defined(CONFIG_SOC_SERIES_STM32WBX) || \
defined(CONFIG_SOC_SERIES_STM32G4X) || \
defined(CONFIG_SOC_SERIES_STM32H5X) || \
defined(CONFIG_SOC_SERIES_STM32H7X) || \
defined(CONFIG_SOC_SERIES_STM32U5X)
/*
* L4, WB, G4, H5, H7 and U5 series STM32 needs to be awaken from deep sleep
* mode, and restore its calibration parameters if there are some
* previously stored calibration parameters.
*/
LL_ADC_DisableDeepPowerDown(adc);
#endif
/*
* Many ADC modules need some time to be stabilized before performing
* any enable or calibration actions.
*/
#if !defined(CONFIG_SOC_SERIES_STM32F0X) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
LL_ADC_EnableInternalRegulator(adc);
k_busy_wait(LL_ADC_DELAY_INTERNAL_REGUL_STAB_US);
#endif
if (config->irq_cfg_func) {
config->irq_cfg_func();
}
#if defined(HAS_CALIBRATION)
adc_stm32_calibrate(dev);
LL_ADC_REG_SetTriggerSource(adc, LL_ADC_REG_TRIG_SOFTWARE);
#endif /* HAS_CALIBRATION */
adc_context_unlock_unconditionally(&data->ctx);
return 0;
}
#ifdef CONFIG_PM_DEVICE
static int adc_stm32_suspend_setup(const struct device *dev)
{
const struct adc_stm32_cfg *config = dev->config;
ADC_TypeDef *adc = (ADC_TypeDef *)config->base;
const struct device *const clk = DEVICE_DT_GET(STM32_CLOCK_CONTROL_NODE);
int err;
/* Disable ADC */
adc_stm32_disable(adc);
#if !defined(CONFIG_SOC_SERIES_STM32F0X) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc) && \
!DT_HAS_COMPAT_STATUS_OKAY(st_stm32f4_adc)
/* Disable ADC internal voltage regulator */
LL_ADC_DisableInternalRegulator(adc);
while (LL_ADC_IsInternalRegulatorEnabled(adc) == 1U) {
}
#endif
#if defined(CONFIG_SOC_SERIES_STM32L4X) || \
defined(CONFIG_SOC_SERIES_STM32L5X) || \
defined(CONFIG_SOC_SERIES_STM32WBX) || \
defined(CONFIG_SOC_SERIES_STM32G4X) || \
defined(CONFIG_SOC_SERIES_STM32H5X) || \
defined(CONFIG_SOC_SERIES_STM32H7X) || \
defined(CONFIG_SOC_SERIES_STM32U5X)
/*
* L4, WB, G4, H5, H7 and U5 series STM32 needs to be put into
* deep sleep mode.
*/
LL_ADC_EnableDeepPowerDown(adc);
#endif
#if defined(CONFIG_SOC_SERIES_STM32U5X)
/* Disable the independent analog supply */
LL_PWR_DisableVDDA();
#endif /* CONFIG_SOC_SERIES_STM32U5X */
/* Stop device clock. Note: fixed clocks are not handled yet. */
err = clock_control_off(clk, (clock_control_subsys_t)&config->pclken[0]);
if (err != 0) {
LOG_ERR("Could not disable ADC clock");
return err;
}
/* Move pins to sleep state */
err = pinctrl_apply_state(config->pcfg, PINCTRL_STATE_SLEEP);
if ((err < 0) && (err != -ENOENT)) {
/*
* If returning -ENOENT, no pins where defined for sleep mode :
* Do not output on console (might sleep already) when going to sleep,
* "ADC pinctrl sleep state not available"
* and don't block PM suspend.
* Else return the error.
*/
return err;
}
return 0;
}
static int adc_stm32_pm_action(const struct device *dev,
enum pm_device_action action)
{
switch (action) {
case PM_DEVICE_ACTION_RESUME:
return adc_stm32_init(dev);
case PM_DEVICE_ACTION_SUSPEND:
return adc_stm32_suspend_setup(dev);
default:
return -ENOTSUP;
}
return 0;
}
#endif /* CONFIG_PM_DEVICE */
static const struct adc_driver_api api_stm32_driver_api = {
.channel_setup = adc_stm32_channel_setup,
.read = adc_stm32_read,
#ifdef CONFIG_ADC_ASYNC
.read_async = adc_stm32_read_async,
#endif
.ref_internal = STM32_ADC_VREF_MV, /* VREF is usually connected to VDD */
};
#if defined(CONFIG_SOC_SERIES_STM32F0X)
/* LL_ADC_CLOCK_ASYNC_DIV1 doesn't exist in F0 LL. Define it here. */
#define LL_ADC_CLOCK_ASYNC_DIV1 LL_ADC_CLOCK_ASYNC
#endif
/* st_prescaler property requires 2 elements : clock ASYNC/SYNC and DIV */
#define ADC_STM32_CLOCK(x) DT_INST_PROP(x, st_adc_clock_source)
#define ADC_STM32_DIV(x) DT_INST_PROP(x, st_adc_prescaler)
/* Macro to set the prefix depending on the 1st element: check if it is SYNC or ASYNC */
#define ADC_STM32_CLOCK_PREFIX(x) \
COND_CODE_1(IS_EQ(ADC_STM32_CLOCK(x), SYNC), \
(LL_ADC_CLOCK_SYNC_PCLK_DIV), \
(LL_ADC_CLOCK_ASYNC_DIV))
/* Concat prefix (1st element) and DIV value (2nd element) of st,adc-prescaler */
#if DT_HAS_COMPAT_STATUS_OKAY(st_stm32f1_adc)
#define ADC_STM32_DT_PRESC(x) 0
#else
#define ADC_STM32_DT_PRESC(x) \
_CONCAT(ADC_STM32_CLOCK_PREFIX(x), ADC_STM32_DIV(x))
#endif
#if defined(CONFIG_ADC_STM32_DMA)
#define ADC_DMA_CHANNEL_INIT(index, src_dev, dest_dev) \
.dma = { \
.dma_dev = DEVICE_DT_GET(DT_INST_DMAS_CTLR_BY_IDX(index, 0)), \
.channel = DT_INST_DMAS_CELL_BY_IDX(index, 0, channel), \
.dma_cfg = { \
.dma_slot = STM32_DMA_SLOT_BY_IDX(index, 0, slot), \
.channel_direction = STM32_DMA_CONFIG_DIRECTION( \
STM32_DMA_CHANNEL_CONFIG_BY_IDX(index, 0)), \
.source_data_size = STM32_DMA_CONFIG_##src_dev##_DATA_SIZE( \
STM32_DMA_CHANNEL_CONFIG_BY_IDX(index, 0)), \
.dest_data_size = STM32_DMA_CONFIG_##dest_dev##_DATA_SIZE( \
STM32_DMA_CHANNEL_CONFIG_BY_IDX(index, 0)), \
.source_burst_length = 1, /* SINGLE transfer */ \
.dest_burst_length = 1, /* SINGLE transfer */ \
.channel_priority = STM32_DMA_CONFIG_PRIORITY( \
STM32_DMA_CHANNEL_CONFIG_BY_IDX(index, 0)), \
.dma_callback = dma_callback, \
.block_count = 2, \
}, \
.src_addr_increment = STM32_DMA_CONFIG_##src_dev##_ADDR_INC( \
STM32_DMA_CHANNEL_CONFIG_BY_IDX(index, 0)), \
.dst_addr_increment = STM32_DMA_CONFIG_##dest_dev##_ADDR_INC( \
STM32_DMA_CHANNEL_CONFIG_BY_IDX(index, 0)), \
}
#define ADC_STM32_IRQ_FUNC(index) \
.irq_cfg_func = NULL,
#else /* CONFIG_ADC_STM32_DMA */
/*
* For series that share interrupt lines for multiple ADC instances
* and have separate interrupt lines for other ADCs (example,
* STM32G473 has 5 ADC instances, ADC1 and ADC2 share IRQn 18 while
* ADC3, ADC4 and ADC5 use IRQns 47, 61 and 62 respectively), generate
* a single common ISR function for each IRQn and call adc_stm32_isr
* for each device using that interrupt line for all enabled ADCs.
*
* To achieve the above, a "first" ADC instance must be chosen for all
* ADC instances sharing the same IRQn. This "first" ADC instance
* generates the code for the common ISR and for installing and
* enabling it while any other ADC sharing the same IRQn skips this
* code generation and does nothing. The common ISR code is generated
* to include calls to adc_stm32_isr for all instances using that same
* IRQn. From the example above, four ISR functions would be generated
* for IRQn 18, 47, 61 and 62, with possible "first" ADC instances
* being ADC1, ADC3, ADC4 and ADC5 if all ADCs were enabled, with the
* ISR function 18 calling adc_stm32_isr for both ADC1 and ADC2.
*
* For some of the macros below, pseudo-code is provided to describe
* its function.
*/
/*
* return (irqn == device_irqn(index)) ? index : NULL
*/
#define FIRST_WITH_IRQN_INTERNAL(index, irqn) \
COND_CODE_1(IS_EQ(irqn, DT_INST_IRQN(index)), (index,), (EMPTY,))
/*
* Returns the "first" instance's index:
*
* instances = []
* for instance in all_active_adcs:
* instances.append(first_with_irqn_internal(device_irqn(index)))
* for instance in instances:
* if instance == NULL:
* instances.remove(instance)
* return instances[0]
*/
#define FIRST_WITH_IRQN(index) \
GET_ARG_N(1, LIST_DROP_EMPTY(DT_INST_FOREACH_STATUS_OKAY_VARGS(FIRST_WITH_IRQN_INTERNAL, \
DT_INST_IRQN(index))))
/*
* Provides code for calling adc_stm32_isr for an instance if its IRQn
* matches:
*
* if (irqn == device_irqn(index)):
* return "adc_stm32_isr(DEVICE_DT_INST_GET(index));"
*/
#define HANDLE_IRQS(index, irqn) \
COND_CODE_1(IS_EQ(irqn, DT_INST_IRQN(index)), (adc_stm32_isr(DEVICE_DT_INST_GET(index));), \
(EMPTY))
/*
* Name of the common ISR for a given IRQn (taken from a device with a
* given index). Example, for an ADC instance with IRQn 18, returns
* "adc_stm32_isr_18".
*/
#define ISR_FUNC(index) UTIL_CAT(adc_stm32_isr_, DT_INST_IRQN(index))
/*
* Macro for generating code for the common ISRs (by looping of all
* ADC instances that share the same IRQn as that of the given device
* by index) and the function for setting up the ISR.
*
* Here is where both "first" and non-"first" instances have code
* generated for their interrupts via HANDLE_IRQS.
*/
#define GENERATE_ISR_CODE(index) \
static void ISR_FUNC(index)(void) \
{ \
DT_INST_FOREACH_STATUS_OKAY_VARGS(HANDLE_IRQS, DT_INST_IRQN(index)) \
} \
\
static void UTIL_CAT(ISR_FUNC(index), _init)(void) \
{ \
IRQ_CONNECT(DT_INST_IRQN(index), DT_INST_IRQ(index, priority), ISR_FUNC(index), \
NULL, 0); \
irq_enable(DT_INST_IRQN(index)); \
}
/*
* Limit generating code to only the "first" instance:
*
* if (first_with_irqn(index) == index):
* generate_isr_code(index)
*/
#define GENERATE_ISR(index) \
COND_CODE_1(IS_EQ(index, FIRST_WITH_IRQN(index)), (GENERATE_ISR_CODE(index)), (EMPTY))
DT_INST_FOREACH_STATUS_OKAY(GENERATE_ISR)
/* Only "first" instances need to call the ISR setup function */
#define ADC_STM32_IRQ_FUNC(index) \
.irq_cfg_func = COND_CODE_1(IS_EQ(index, FIRST_WITH_IRQN(index)), \
(UTIL_CAT(ISR_FUNC(index), _init)), (NULL)),
#define ADC_DMA_CHANNEL_INIT(index, src_dev, dest_dev)
#endif /* CONFIG_ADC_STM32_DMA */
#define ADC_DMA_CHANNEL(id, src, dest) \
COND_CODE_1(DT_INST_DMAS_HAS_IDX(id, 0), \
(ADC_DMA_CHANNEL_INIT(id, src, dest)), \
(/* Required for other adc instances without dma */))
#define ADC_STM32_INIT(index) \
\
PINCTRL_DT_INST_DEFINE(index); \
\
static const struct stm32_pclken pclken_##index[] = \
STM32_DT_INST_CLOCKS(index); \
\
static const struct adc_stm32_cfg adc_stm32_cfg_##index = { \
.base = (ADC_TypeDef *)DT_INST_REG_ADDR(index), \
ADC_STM32_IRQ_FUNC(index) \
.pclken = pclken_##index, \
.pclk_len = DT_INST_NUM_CLOCKS(index), \
.clk_prescaler = ADC_STM32_DT_PRESC(index), \
.pcfg = PINCTRL_DT_INST_DEV_CONFIG_GET(index), \
.sequencer_type = DT_INST_PROP(index, st_adc_sequencer), \
.sampling_time_table = DT_INST_PROP(index, sampling_times), \
.num_sampling_time_common_channels = \
DT_INST_PROP_OR(index, num_sampling_time_common_channels, 0),\
.res_table_size = DT_INST_PROP_LEN(index, resolutions), \
.res_table = DT_INST_PROP(index, resolutions), \
}; \
\
static struct adc_stm32_data adc_stm32_data_##index = { \
ADC_CONTEXT_INIT_TIMER(adc_stm32_data_##index, ctx), \
ADC_CONTEXT_INIT_LOCK(adc_stm32_data_##index, ctx), \
ADC_CONTEXT_INIT_SYNC(adc_stm32_data_##index, ctx), \
ADC_DMA_CHANNEL(index, PERIPHERAL, MEMORY) \
}; \
\
PM_DEVICE_DT_INST_DEFINE(index, adc_stm32_pm_action); \
\
DEVICE_DT_INST_DEFINE(index, \
&adc_stm32_init, PM_DEVICE_DT_INST_GET(index), \
&adc_stm32_data_##index, &adc_stm32_cfg_##index, \
POST_KERNEL, CONFIG_ADC_INIT_PRIORITY, \
&api_stm32_driver_api);
DT_INST_FOREACH_STATUS_OKAY(ADC_STM32_INIT)