blob: 4b8b01f521e6d387ba0a0b79b1c833cec27fce66 [file] [log] [blame]
/*
* Copyright (c) 2020 Mohamed ElShahawi.
* Copyright (c) 2021 Espressif Systems (Shanghai) Co., Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT espressif_esp32_rtc
#define CPU_RESET_REASON RTC_SW_CPU_RESET
#if defined(CONFIG_SOC_SERIES_ESP32)
#define DT_CPU_COMPAT cdns_tensilica_xtensa_lx6
#undef CPU_RESET_REASON
#define CPU_RESET_REASON SW_CPU_RESET
#include <zephyr/dt-bindings/clock/esp32_clock.h>
#include "esp32/rom/rtc.h"
#include "soc/dport_reg.h"
#elif defined(CONFIG_SOC_SERIES_ESP32S2)
#define DT_CPU_COMPAT cdns_tensilica_xtensa_lx7
#include <zephyr/dt-bindings/clock/esp32s2_clock.h>
#include "esp32s2/rom/rtc.h"
#include "soc/dport_reg.h"
#elif defined(CONFIG_SOC_SERIES_ESP32S3)
#define DT_CPU_COMPAT cdns_tensilica_xtensa_lx7
#include <zephyr/dt-bindings/clock/esp32s3_clock.h>
#include "esp32s3/rom/rtc.h"
#include "soc/dport_reg.h"
#include "esp32s3/clk.h"
#elif CONFIG_SOC_SERIES_ESP32C3
#define DT_CPU_COMPAT espressif_riscv
#include <zephyr/dt-bindings/clock/esp32c3_clock.h>
#include "esp32c3/rom/rtc.h"
#include <soc/soc_caps.h>
#include <soc/soc.h>
#include <soc/rtc.h>
#endif /* CONFIG_SOC_SERIES_ESP32xx */
#include "esp_rom_sys.h"
#include <soc/rtc.h>
#include <soc/i2s_reg.h>
#include <soc/apb_ctrl_reg.h>
#include <soc/timer_group_reg.h>
#include <hal/clk_gate_ll.h>
#include <soc.h>
#include <zephyr/drivers/clock_control.h>
#include <driver/periph_ctrl.h>
#include <hal/cpu_hal.h>
struct esp32_clock_config {
int clk_src_sel;
uint32_t cpu_freq;
uint32_t xtal_freq_sel;
int xtal_div;
};
static uint8_t const xtal_freq[] = {
#if defined(CONFIG_SOC_SERIES_ESP32) || \
defined(CONFIG_SOC_SERIES_ESP32S3)
[ESP32_CLK_XTAL_24M] = 24,
[ESP32_CLK_XTAL_26M] = 26,
[ESP32_CLK_XTAL_40M] = 40,
[ESP32_CLK_XTAL_AUTO] = 0
#elif defined(CONFIG_SOC_SERIES_ESP32S2)
[ESP32_CLK_XTAL_40M] = 40,
#elif defined(CONFIG_SOC_SERIES_ESP32C3)
[ESP32_CLK_XTAL_32M] = 32,
[ESP32_CLK_XTAL_40M] = 40,
#endif
};
static int clock_control_esp32_on(const struct device *dev,
clock_control_subsys_t sys)
{
ARG_UNUSED(dev);
periph_module_enable((periph_module_t)sys);
return 0;
}
static int clock_control_esp32_off(const struct device *dev,
clock_control_subsys_t sys)
{
ARG_UNUSED(dev);
periph_module_disable((periph_module_t)sys);
return 0;
}
static int clock_control_esp32_async_on(const struct device *dev,
clock_control_subsys_t sys,
clock_control_cb_t cb,
void *user_data)
{
ARG_UNUSED(dev);
ARG_UNUSED(sys);
ARG_UNUSED(cb);
ARG_UNUSED(user_data);
return -ENOTSUP;
}
static enum clock_control_status clock_control_esp32_get_status(const struct device *dev,
clock_control_subsys_t sys)
{
ARG_UNUSED(dev);
uint32_t clk_en_reg = periph_ll_get_clk_en_reg((periph_module_t)sys);
uint32_t clk_en_mask = periph_ll_get_clk_en_mask((periph_module_t)sys);
if (DPORT_GET_PERI_REG_MASK(clk_en_reg, clk_en_mask)) {
return CLOCK_CONTROL_STATUS_ON;
}
return CLOCK_CONTROL_STATUS_OFF;
}
static int clock_control_esp32_get_rate(const struct device *dev,
clock_control_subsys_t sub_system,
uint32_t *rate)
{
ARG_UNUSED(sub_system);
rtc_cpu_freq_config_t config;
rtc_clk_cpu_freq_get_config(&config);
*rate = config.freq_mhz;
return 0;
}
#if defined(CONFIG_SOC_SERIES_ESP32)
static void esp32_clock_perip_init(void)
{
uint32_t common_perip_clk;
uint32_t hwcrypto_perip_clk;
uint32_t wifi_bt_sdio_clk;
#if !CONFIG_SMP
soc_reset_reason_t rst_reas[1];
#else
soc_reset_reason_t rst_reas[2];
#endif
rst_reas[0] = esp_rom_get_reset_reason(0);
#if CONFIG_SMP
rst_reas[1] = esp_rom_get_reset_reason(1);
#endif
/* For reason that only reset CPU, do not disable the clocks
* that have been enabled before reset.
*/
if ((rst_reas[0] == RESET_REASON_CPU0_MWDT0 || rst_reas[0] == RESET_REASON_CPU0_SW ||
rst_reas[0] == RESET_REASON_CPU0_RTC_WDT)
#if CONFIG_SMP
|| (rst_reas[1] == RESET_REASON_CPU1_MWDT1 || rst_reas[1] == RESET_REASON_CPU1_SW ||
rst_reas[1] == RESET_REASON_CPU1_RTC_WDT)
#endif
) {
common_perip_clk = ~DPORT_READ_PERI_REG(DPORT_PERIP_CLK_EN_REG);
hwcrypto_perip_clk = ~DPORT_READ_PERI_REG(DPORT_PERI_CLK_EN_REG);
wifi_bt_sdio_clk = ~DPORT_READ_PERI_REG(DPORT_WIFI_CLK_EN_REG);
} else {
common_perip_clk = DPORT_WDG_CLK_EN |
DPORT_PCNT_CLK_EN |
DPORT_LEDC_CLK_EN |
DPORT_TIMERGROUP1_CLK_EN |
DPORT_PWM0_CLK_EN |
DPORT_TWAI_CLK_EN |
DPORT_PWM1_CLK_EN |
DPORT_PWM2_CLK_EN |
DPORT_PWM3_CLK_EN;
hwcrypto_perip_clk = DPORT_PERI_EN_AES |
DPORT_PERI_EN_SHA |
DPORT_PERI_EN_RSA |
DPORT_PERI_EN_SECUREBOOT;
wifi_bt_sdio_clk = DPORT_WIFI_CLK_WIFI_EN |
DPORT_WIFI_CLK_BT_EN_M |
DPORT_WIFI_CLK_UNUSED_BIT5 |
DPORT_WIFI_CLK_UNUSED_BIT12 |
DPORT_WIFI_CLK_SDIOSLAVE_EN |
DPORT_WIFI_CLK_SDIO_HOST_EN |
DPORT_WIFI_CLK_EMAC_EN;
}
/* Reset peripherals like I2C, SPI, UART, I2S and bring them to known state */
common_perip_clk |= DPORT_I2S0_CLK_EN |
DPORT_UART_CLK_EN |
DPORT_SPI2_CLK_EN |
DPORT_I2C_EXT0_CLK_EN |
DPORT_UHCI0_CLK_EN |
DPORT_RMT_CLK_EN |
DPORT_UHCI1_CLK_EN |
DPORT_SPI3_CLK_EN |
DPORT_I2C_EXT1_CLK_EN |
DPORT_I2S1_CLK_EN |
DPORT_SPI_DMA_CLK_EN;
common_perip_clk &= ~DPORT_SPI01_CLK_EN;
common_perip_clk &= ~DPORT_SPI2_CLK_EN;
common_perip_clk &= ~DPORT_SPI3_CLK_EN;
/* Change I2S clock to audio PLL first. Because if I2S uses 160MHz clock,
* the current is not reduced when disable I2S clock.
*/
DPORT_SET_PERI_REG_MASK(I2S_CLKM_CONF_REG(0), I2S_CLKA_ENA);
DPORT_SET_PERI_REG_MASK(I2S_CLKM_CONF_REG(1), I2S_CLKA_ENA);
/* Disable some peripheral clocks. */
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, common_perip_clk);
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, common_perip_clk);
/* Disable hardware crypto clocks. */
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERI_CLK_EN_REG, hwcrypto_perip_clk);
DPORT_SET_PERI_REG_MASK(DPORT_PERI_RST_EN_REG, hwcrypto_perip_clk);
/* Disable WiFi/BT/SDIO clocks. */
DPORT_CLEAR_PERI_REG_MASK(DPORT_WIFI_CLK_EN_REG, wifi_bt_sdio_clk);
/* Enable RNG clock. */
periph_module_enable(PERIPH_RNG_MODULE);
}
#endif /* CONFIG_SOC_SERIES_ESP32 */
#if defined(CONFIG_SOC_SERIES_ESP32S2)
static void esp32_clock_perip_init(void)
{
uint32_t common_perip_clk;
uint32_t hwcrypto_perip_clk;
uint32_t wifi_bt_sdio_clk;
uint32_t common_perip_clk1;
soc_reset_reason_t rst_reason = esp_rom_get_reset_reason(0);
/* For reason that only reset CPU, do not disable the clocks
* that have been enabled before reset.
*/
if (rst_reason == RESET_REASON_CPU0_MWDT0 || rst_reason == RESET_REASON_CPU0_SW ||
rst_reason == RESET_REASON_CPU0_RTC_WDT || rst_reason == RESET_REASON_CPU0_MWDT1) {
common_perip_clk = ~DPORT_READ_PERI_REG(DPORT_PERIP_CLK_EN_REG);
hwcrypto_perip_clk = ~DPORT_READ_PERI_REG(DPORT_PERIP_CLK_EN1_REG);
wifi_bt_sdio_clk = ~DPORT_READ_PERI_REG(DPORT_WIFI_CLK_EN_REG);
} else {
common_perip_clk = DPORT_WDG_CLK_EN |
DPORT_I2S0_CLK_EN |
DPORT_UART1_CLK_EN |
DPORT_SPI2_CLK_EN |
DPORT_I2C_EXT0_CLK_EN |
DPORT_UHCI0_CLK_EN |
DPORT_RMT_CLK_EN |
DPORT_PCNT_CLK_EN |
DPORT_LEDC_CLK_EN |
DPORT_TIMERGROUP1_CLK_EN |
DPORT_SPI3_CLK_EN |
DPORT_PWM0_CLK_EN |
DPORT_TWAI_CLK_EN |
DPORT_PWM1_CLK_EN |
DPORT_I2S1_CLK_EN |
DPORT_SPI2_DMA_CLK_EN |
DPORT_SPI3_DMA_CLK_EN |
DPORT_PWM2_CLK_EN |
DPORT_PWM3_CLK_EN;
common_perip_clk1 = 0;
hwcrypto_perip_clk = DPORT_CRYPTO_AES_CLK_EN |
DPORT_CRYPTO_SHA_CLK_EN |
DPORT_CRYPTO_RSA_CLK_EN;
wifi_bt_sdio_clk = DPORT_WIFI_CLK_WIFI_EN |
DPORT_WIFI_CLK_BT_EN_M |
DPORT_WIFI_CLK_UNUSED_BIT5 |
DPORT_WIFI_CLK_UNUSED_BIT12 |
DPORT_WIFI_CLK_SDIOSLAVE_EN |
DPORT_WIFI_CLK_SDIO_HOST_EN |
DPORT_WIFI_CLK_EMAC_EN;
}
/* Reset peripherals like I2C, SPI, UART, I2S and bring them to known state */
common_perip_clk |= DPORT_I2S0_CLK_EN |
DPORT_UART1_CLK_EN |
DPORT_USB_CLK_EN |
DPORT_SPI2_CLK_EN |
DPORT_I2C_EXT0_CLK_EN |
DPORT_UHCI0_CLK_EN |
DPORT_RMT_CLK_EN |
DPORT_UHCI1_CLK_EN |
DPORT_SPI3_CLK_EN |
DPORT_I2C_EXT1_CLK_EN |
DPORT_I2S1_CLK_EN |
DPORT_SPI2_DMA_CLK_EN |
DPORT_SPI3_DMA_CLK_EN;
common_perip_clk1 = 0;
/* Change I2S clock to audio PLL first. Because if I2S uses 160MHz clock,
* the current is not reduced when disable I2S clock.
*/
REG_SET_FIELD(I2S_CLKM_CONF_REG(0), I2S_CLK_SEL, I2S_CLK_AUDIO_PLL);
REG_SET_FIELD(I2S_CLKM_CONF_REG(1), I2S_CLK_SEL, I2S_CLK_AUDIO_PLL);
/* Disable some peripheral clocks. */
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN_REG, common_perip_clk);
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN_REG, common_perip_clk);
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN1_REG, common_perip_clk1);
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN1_REG, common_perip_clk1);
/* Disable hardware crypto clocks. */
DPORT_CLEAR_PERI_REG_MASK(DPORT_PERIP_CLK_EN1_REG, hwcrypto_perip_clk);
DPORT_SET_PERI_REG_MASK(DPORT_PERIP_RST_EN1_REG, hwcrypto_perip_clk);
/* Disable WiFi/BT/SDIO clocks. */
DPORT_CLEAR_PERI_REG_MASK(DPORT_WIFI_CLK_EN_REG, wifi_bt_sdio_clk);
/* Enable WiFi MAC and POWER clocks */
DPORT_SET_PERI_REG_MASK(DPORT_WIFI_CLK_EN_REG, DPORT_WIFI_CLK_WIFI_EN);
/* Set WiFi light sleep clock source to RTC slow clock */
DPORT_REG_SET_FIELD(DPORT_BT_LPCK_DIV_INT_REG, DPORT_BT_LPCK_DIV_NUM, 0);
DPORT_CLEAR_PERI_REG_MASK(DPORT_BT_LPCK_DIV_FRAC_REG, DPORT_LPCLK_SEL_8M);
DPORT_SET_PERI_REG_MASK(DPORT_BT_LPCK_DIV_FRAC_REG, DPORT_LPCLK_SEL_RTC_SLOW);
/* Enable RNG clock. */
periph_module_enable(PERIPH_RNG_MODULE);
}
#endif /* CONFIG_SOC_SERIES_ESP32S2 */
#if defined(CONFIG_SOC_SERIES_ESP32S3)
static void esp32_clock_perip_init(void)
{
#if defined(CONFIG_SOC_ESP32S3_APPCPU)
/* skip APPCPU configuration */
return;
#endif
uint32_t common_perip_clk, hwcrypto_perip_clk, wifi_bt_sdio_clk = 0;
uint32_t common_perip_clk1 = 0;
soc_reset_reason_t rst_reason = esp_rom_get_reset_reason(0);
/* For reason that only reset CPU, do not disable the clocks
* that have been enabled before reset.
*/
if (rst_reason == RESET_REASON_CPU0_MWDT0 || rst_reason == RESET_REASON_CPU0_SW ||
rst_reason == RESET_REASON_CPU0_RTC_WDT || rst_reason == RESET_REASON_CPU0_MWDT1) {
common_perip_clk = ~READ_PERI_REG(SYSTEM_PERIP_CLK_EN0_REG);
hwcrypto_perip_clk = ~READ_PERI_REG(SYSTEM_PERIP_CLK_EN1_REG);
wifi_bt_sdio_clk = ~READ_PERI_REG(SYSTEM_WIFI_CLK_EN_REG);
} else {
common_perip_clk = SYSTEM_WDG_CLK_EN |
SYSTEM_I2S0_CLK_EN |
SYSTEM_UART1_CLK_EN |
SYSTEM_UART2_CLK_EN |
SYSTEM_USB_CLK_EN |
SYSTEM_SPI2_CLK_EN |
SYSTEM_I2C_EXT0_CLK_EN |
SYSTEM_UHCI0_CLK_EN |
SYSTEM_RMT_CLK_EN |
SYSTEM_PCNT_CLK_EN |
SYSTEM_LEDC_CLK_EN |
SYSTEM_TIMERGROUP1_CLK_EN |
SYSTEM_SPI3_CLK_EN |
SYSTEM_SPI4_CLK_EN |
SYSTEM_PWM0_CLK_EN |
SYSTEM_TWAI_CLK_EN |
SYSTEM_PWM1_CLK_EN |
SYSTEM_I2S1_CLK_EN |
SYSTEM_SPI2_DMA_CLK_EN |
SYSTEM_SPI3_DMA_CLK_EN |
SYSTEM_PWM2_CLK_EN |
SYSTEM_PWM3_CLK_EN;
common_perip_clk1 = 0;
hwcrypto_perip_clk = SYSTEM_CRYPTO_AES_CLK_EN |
SYSTEM_CRYPTO_SHA_CLK_EN |
SYSTEM_CRYPTO_RSA_CLK_EN;
wifi_bt_sdio_clk = SYSTEM_WIFI_CLK_WIFI_EN |
SYSTEM_WIFI_CLK_BT_EN_M |
SYSTEM_WIFI_CLK_UNUSED_BIT5 |
SYSTEM_WIFI_CLK_UNUSED_BIT12 |
SYSTEM_WIFI_CLK_SDIO_HOST_EN;
}
/* Reset peripherals like I2C, SPI, UART, I2S and bring them to known state */
common_perip_clk |= SYSTEM_I2S0_CLK_EN |
SYSTEM_UART1_CLK_EN |
SYSTEM_UART2_CLK_EN |
SYSTEM_USB_CLK_EN |
SYSTEM_SPI2_CLK_EN |
SYSTEM_I2C_EXT0_CLK_EN |
SYSTEM_UHCI0_CLK_EN |
SYSTEM_RMT_CLK_EN |
SYSTEM_UHCI1_CLK_EN |
SYSTEM_SPI3_CLK_EN |
SYSTEM_SPI4_CLK_EN |
SYSTEM_I2C_EXT1_CLK_EN |
SYSTEM_I2S1_CLK_EN |
SYSTEM_SPI2_DMA_CLK_EN |
SYSTEM_SPI3_DMA_CLK_EN;
common_perip_clk1 = 0;
/* Disable some peripheral clocks. */
CLEAR_PERI_REG_MASK(SYSTEM_PERIP_CLK_EN0_REG, common_perip_clk);
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN0_REG, common_perip_clk);
CLEAR_PERI_REG_MASK(SYSTEM_PERIP_CLK_EN1_REG, common_perip_clk1);
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN1_REG, common_perip_clk1);
/* Disable hardware crypto clocks. */
CLEAR_PERI_REG_MASK(SYSTEM_PERIP_CLK_EN1_REG, hwcrypto_perip_clk);
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN1_REG, hwcrypto_perip_clk);
/* Disable WiFi/BT/SDIO clocks. */
CLEAR_PERI_REG_MASK(SYSTEM_WIFI_CLK_EN_REG, wifi_bt_sdio_clk);
SET_PERI_REG_MASK(SYSTEM_WIFI_CLK_EN_REG, SYSTEM_WIFI_CLK_EN);
/* Set WiFi light sleep clock source to RTC slow clock */
REG_SET_FIELD(SYSTEM_BT_LPCK_DIV_INT_REG, SYSTEM_BT_LPCK_DIV_NUM, 0);
CLEAR_PERI_REG_MASK(SYSTEM_BT_LPCK_DIV_FRAC_REG, SYSTEM_LPCLK_SEL_8M);
SET_PERI_REG_MASK(SYSTEM_BT_LPCK_DIV_FRAC_REG, SYSTEM_LPCLK_SEL_RTC_SLOW);
/* Enable RNG clock. */
periph_module_enable(PERIPH_RNG_MODULE);
esp_rom_uart_tx_wait_idle(0);
esp_rom_uart_set_clock_baudrate(0, UART_CLK_FREQ_ROM, 115200);
}
#endif /* CONFIG_SOC_SERIES_ESP32S3 */
#if defined(CONFIG_SOC_SERIES_ESP32C3)
static void esp32_clock_perip_init(void)
{
uint32_t common_perip_clk;
uint32_t hwcrypto_perip_clk;
uint32_t wifi_bt_sdio_clk;
uint32_t common_perip_clk1;
soc_reset_reason_t rst_reason = esp_rom_get_reset_reason(0);
/* For reason that only reset CPU, do not disable the clocks
* that have been enabled before reset.
*/
if (rst_reason == RESET_REASON_CPU0_MWDT0 || rst_reason == RESET_REASON_CPU0_SW ||
rst_reason == RESET_REASON_CPU0_RTC_WDT || rst_reason == RESET_REASON_CPU0_MWDT1) {
common_perip_clk = ~READ_PERI_REG(SYSTEM_PERIP_CLK_EN0_REG);
hwcrypto_perip_clk = ~READ_PERI_REG(SYSTEM_PERIP_CLK_EN1_REG);
wifi_bt_sdio_clk = ~READ_PERI_REG(SYSTEM_WIFI_CLK_EN_REG);
} else {
common_perip_clk = SYSTEM_WDG_CLK_EN |
SYSTEM_I2S0_CLK_EN |
SYSTEM_UART1_CLK_EN |
SYSTEM_SPI2_CLK_EN |
SYSTEM_I2C_EXT0_CLK_EN |
SYSTEM_UHCI0_CLK_EN |
SYSTEM_RMT_CLK_EN |
SYSTEM_LEDC_CLK_EN |
SYSTEM_TIMERGROUP1_CLK_EN |
SYSTEM_SPI3_CLK_EN |
SYSTEM_SPI4_CLK_EN |
SYSTEM_TWAI_CLK_EN |
SYSTEM_I2S1_CLK_EN |
SYSTEM_SPI2_DMA_CLK_EN |
SYSTEM_SPI3_DMA_CLK_EN;
common_perip_clk1 = 0;
hwcrypto_perip_clk = SYSTEM_CRYPTO_AES_CLK_EN |
SYSTEM_CRYPTO_SHA_CLK_EN |
SYSTEM_CRYPTO_RSA_CLK_EN;
wifi_bt_sdio_clk = SYSTEM_WIFI_CLK_WIFI_EN |
SYSTEM_WIFI_CLK_BT_EN_M |
SYSTEM_WIFI_CLK_UNUSED_BIT5 |
SYSTEM_WIFI_CLK_UNUSED_BIT12;
}
/* Reset peripherals like I2C, SPI, UART, I2S and bring them to known state */
common_perip_clk |= SYSTEM_I2S0_CLK_EN |
SYSTEM_UART1_CLK_EN |
SYSTEM_SPI2_CLK_EN |
SYSTEM_I2C_EXT0_CLK_EN |
SYSTEM_UHCI0_CLK_EN |
SYSTEM_RMT_CLK_EN |
SYSTEM_UHCI1_CLK_EN |
SYSTEM_SPI3_CLK_EN |
SYSTEM_SPI4_CLK_EN |
SYSTEM_I2C_EXT1_CLK_EN |
SYSTEM_I2S1_CLK_EN |
SYSTEM_SPI2_DMA_CLK_EN |
SYSTEM_SPI3_DMA_CLK_EN;
common_perip_clk1 = 0;
/* Disable some peripheral clocks. */
CLEAR_PERI_REG_MASK(SYSTEM_PERIP_CLK_EN0_REG, common_perip_clk);
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN0_REG, common_perip_clk);
CLEAR_PERI_REG_MASK(SYSTEM_PERIP_CLK_EN1_REG, common_perip_clk1);
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN1_REG, common_perip_clk1);
/* Disable hardware crypto clocks. */
CLEAR_PERI_REG_MASK(SYSTEM_PERIP_CLK_EN1_REG, hwcrypto_perip_clk);
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN1_REG, hwcrypto_perip_clk);
/* Disable WiFi/BT/SDIO clocks. */
CLEAR_PERI_REG_MASK(SYSTEM_WIFI_CLK_EN_REG, wifi_bt_sdio_clk);
SET_PERI_REG_MASK(SYSTEM_WIFI_CLK_EN_REG, SYSTEM_WIFI_CLK_EN);
/* Set WiFi light sleep clock source to RTC slow clock */
REG_SET_FIELD(SYSTEM_BT_LPCK_DIV_INT_REG, SYSTEM_BT_LPCK_DIV_NUM, 0);
CLEAR_PERI_REG_MASK(SYSTEM_BT_LPCK_DIV_FRAC_REG, SYSTEM_LPCLK_SEL_8M);
SET_PERI_REG_MASK(SYSTEM_BT_LPCK_DIV_FRAC_REG, SYSTEM_LPCLK_SEL_RTC_SLOW);
/* Enable RNG clock. */
periph_module_enable(PERIPH_RNG_MODULE);
}
#endif /* CONFIG_SOC_SERIES_ESP32C3 */
static int clock_control_esp32_init(const struct device *dev)
{
const struct esp32_clock_config *cfg = dev->config;
rtc_cpu_freq_config_t old_config;
rtc_cpu_freq_config_t new_config;
bool res;
/* reset default config to use dts config */
if (rtc_clk_apb_freq_get() < APB_CLK_FREQ || rtc_get_reset_reason(0) != CPU_RESET_REASON) {
rtc_clk_config_t clk_cfg = RTC_CLK_CONFIG_DEFAULT();
clk_cfg.xtal_freq = xtal_freq[cfg->xtal_freq_sel];
clk_cfg.cpu_freq_mhz = cfg->cpu_freq;
clk_cfg.slow_freq = rtc_clk_slow_freq_get();
clk_cfg.fast_freq = rtc_clk_fast_freq_get();
rtc_clk_init(clk_cfg);
}
rtc_clk_fast_freq_set(RTC_FAST_FREQ_8M);
rtc_clk_cpu_freq_get_config(&old_config);
const uint32_t old_freq_mhz = old_config.freq_mhz;
const uint32_t new_freq_mhz = cfg->cpu_freq;
res = rtc_clk_cpu_freq_mhz_to_config(cfg->cpu_freq, &new_config);
if (!res) {
return -ENOTSUP;
}
/* wait uart output to be cleared */
esp_rom_uart_tx_wait_idle(0);
if (cfg->xtal_div >= 0) {
new_config.div = cfg->xtal_div;
}
if (cfg->clk_src_sel >= 0) {
new_config.source = cfg->clk_src_sel;
}
/* set new configuration */
rtc_clk_cpu_freq_set_config(&new_config);
/* Re-calculate the ccount to make time calculation correct */
cpu_hal_set_cycle_count((uint64_t)cpu_hal_get_cycle_count() * new_freq_mhz / old_freq_mhz);
esp32_clock_perip_init();
return 0;
}
static const struct clock_control_driver_api clock_control_esp32_api = {
.on = clock_control_esp32_on,
.off = clock_control_esp32_off,
.async_on = clock_control_esp32_async_on,
.get_rate = clock_control_esp32_get_rate,
.get_status = clock_control_esp32_get_status,
};
#define ESP32_CLOCK_SOURCE \
COND_CODE_1(DT_NODE_HAS_PROP(DT_INST(0, DT_CPU_COMPAT), clock_source), \
(DT_PROP(DT_INST(0, DT_CPU_COMPAT), clock_source)), (-1))
#define ESP32_CLOCK_XTAL_DIV \
COND_CODE_1(DT_NODE_HAS_PROP(0, xtal_div), \
(DT_INST_PROP(0, xtal_div)), (-1))
static const struct esp32_clock_config esp32_clock_config0 = {
.clk_src_sel = ESP32_CLOCK_SOURCE,
.cpu_freq = DT_PROP(DT_INST(0, DT_CPU_COMPAT), clock_frequency) / 1000000,
.xtal_freq_sel = DT_INST_PROP(0, xtal_freq),
.xtal_div = ESP32_CLOCK_XTAL_DIV
};
DEVICE_DT_DEFINE(DT_NODELABEL(rtc),
&clock_control_esp32_init,
NULL,
NULL,
&esp32_clock_config0,
PRE_KERNEL_1,
CONFIG_CLOCK_CONTROL_INIT_PRIORITY,
&clock_control_esp32_api);