blob: 01c698ba3c622353bc410d3152a7361b078bd612 [file] [log] [blame]
/* ST Microelectronics LPS22HH pressure and temperature sensor
*
* Copyright (c) 2019 STMicroelectronics
*
* SPDX-License-Identifier: Apache-2.0
*
* Datasheet:
* https://www.st.com/resource/en/datasheet/lps22hh.pdf
*/
#define DT_DRV_COMPAT st_lps22hh
#include <zephyr/drivers/sensor.h>
#include <zephyr/kernel.h>
#include <zephyr/device.h>
#include <zephyr/init.h>
#include <zephyr/sys/byteorder.h>
#include <zephyr/sys/__assert.h>
#include <zephyr/logging/log.h>
#include "lps22hh.h"
LOG_MODULE_REGISTER(LPS22HH, CONFIG_SENSOR_LOG_LEVEL);
static inline int lps22hh_set_odr_raw(const struct device *dev, uint8_t odr)
{
const struct lps22hh_config * const cfg = dev->config;
stmdev_ctx_t *ctx = (stmdev_ctx_t *)&cfg->ctx;
return lps22hh_data_rate_set(ctx, odr);
}
static int lps22hh_sample_fetch(const struct device *dev,
enum sensor_channel chan)
{
struct lps22hh_data *data = dev->data;
const struct lps22hh_config * const cfg = dev->config;
stmdev_ctx_t *ctx = (stmdev_ctx_t *)&cfg->ctx;
uint32_t raw_press;
int16_t raw_temp;
__ASSERT_NO_MSG(chan == SENSOR_CHAN_ALL);
if (lps22hh_pressure_raw_get(ctx, &raw_press) < 0) {
LOG_DBG("Failed to read sample");
return -EIO;
}
if (lps22hh_temperature_raw_get(ctx, &raw_temp) < 0) {
LOG_DBG("Failed to read sample");
return -EIO;
}
data->sample_press = raw_press;
data->sample_temp = raw_temp;
return 0;
}
static inline void lps22hh_press_convert(struct sensor_value *val,
int32_t raw_val)
{
int32_t press_tmp = raw_val >> 8; /* raw value is left aligned (24 msb) */
/* Pressure sensitivity is 4096 LSB/hPa */
/* Also convert hPa into kPa */
val->val1 = press_tmp / 40960;
/* For the decimal part use (3125 / 128) as a factor instead of
* (1000000 / 40960) to avoid int32 overflow
*/
val->val2 = (press_tmp % 40960) * 3125 / 128;
}
static inline void lps22hh_temp_convert(struct sensor_value *val,
int16_t raw_val)
{
/* Temperature sensitivity is 100 LSB/deg C */
val->val1 = raw_val / 100;
val->val2 = ((int32_t)raw_val % 100) * 10000;
}
static int lps22hh_channel_get(const struct device *dev,
enum sensor_channel chan,
struct sensor_value *val)
{
struct lps22hh_data *data = dev->data;
if (chan == SENSOR_CHAN_PRESS) {
lps22hh_press_convert(val, data->sample_press);
} else if (chan == SENSOR_CHAN_AMBIENT_TEMP) {
lps22hh_temp_convert(val, data->sample_temp);
} else {
return -ENOTSUP;
}
return 0;
}
static const uint16_t lps22hh_map[] = {0, 1, 10, 25, 50, 75, 100, 200};
static int lps22hh_odr_set(const struct device *dev, uint16_t freq)
{
int odr;
for (odr = 0; odr < ARRAY_SIZE(lps22hh_map); odr++) {
if (freq == lps22hh_map[odr]) {
break;
}
}
if (odr == ARRAY_SIZE(lps22hh_map)) {
LOG_DBG("bad frequency");
return -EINVAL;
}
if (lps22hh_set_odr_raw(dev, odr) < 0) {
LOG_DBG("failed to set sampling rate");
return -EIO;
}
return 0;
}
static int lps22hh_attr_set(const struct device *dev,
enum sensor_channel chan,
enum sensor_attribute attr,
const struct sensor_value *val)
{
if (chan != SENSOR_CHAN_ALL) {
LOG_WRN("attr_set() not supported on this channel.");
return -ENOTSUP;
}
switch (attr) {
case SENSOR_ATTR_SAMPLING_FREQUENCY:
return lps22hh_odr_set(dev, val->val1);
default:
LOG_DBG("operation not supported.");
return -ENOTSUP;
}
return 0;
}
static const struct sensor_driver_api lps22hh_driver_api = {
.attr_set = lps22hh_attr_set,
.sample_fetch = lps22hh_sample_fetch,
.channel_get = lps22hh_channel_get,
#if CONFIG_LPS22HH_TRIGGER
.trigger_set = lps22hh_trigger_set,
#endif
};
static int lps22hh_init_chip(const struct device *dev)
{
const struct lps22hh_config * const cfg = dev->config;
struct lps22hh_data *data = dev->data;
stmdev_ctx_t *ctx = (stmdev_ctx_t *)&cfg->ctx;
uint8_t chip_id;
int ret;
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i3c)
if (cfg->i3c.bus != NULL) {
/*
* Need to grab the pointer to the I3C device descriptor
* before we can talk to the sensor.
*/
data->i3c_dev = i3c_device_find(cfg->i3c.bus, &cfg->i3c.dev_id);
if (data->i3c_dev == NULL) {
LOG_ERR("Cannot find I3C device descriptor");
return -ENODEV;
}
}
#endif
if (lps22hh_device_id_get(ctx, &chip_id) < 0) {
LOG_ERR("%s: Not able to read dev id", dev->name);
return -EIO;
}
if (chip_id != LPS22HH_ID) {
LOG_ERR("%s: Invalid chip ID 0x%02x", dev->name, chip_id);
return -EIO;
}
LOG_DBG("%s: chip id 0x%x", dev->name, chip_id);
#if DT_ANY_INST_ON_BUS_STATUS_OKAY(i3c)
if (cfg->i3c.bus != NULL) {
/*
* Enabling I3C and disabling I2C are required
* for I3C IBI to work, or else the sensor will not
* send any IBIs.
*/
ret = lps22hh_i3c_interface_set(ctx, LPS22HH_I3C_ENABLE);
if (ret < 0) {
LOG_ERR("Cannot enable I3C interface");
return ret;
}
ret = lps22hh_i2c_interface_set(ctx, LPS22HH_I2C_DISABLE);
if (ret < 0) {
LOG_ERR("Cannot disable I2C interface");
return ret;
}
}
#else
ARG_UNUSED(data);
#endif
/* set sensor default odr */
LOG_DBG("%s: odr: %d", dev->name, cfg->odr);
ret = lps22hh_set_odr_raw(dev, cfg->odr);
if (ret < 0) {
LOG_ERR("%s: Failed to set odr %d", dev->name, cfg->odr);
return ret;
}
if (lps22hh_block_data_update_set(ctx, PROPERTY_ENABLE) < 0) {
LOG_ERR("%s: Failed to set BDU", dev->name);
return ret;
}
return 0;
}
static int lps22hh_init(const struct device *dev)
{
if (lps22hh_init_chip(dev) < 0) {
LOG_DBG("Failed to initialize chip");
return -EIO;
}
#ifdef CONFIG_LPS22HH_TRIGGER
if (lps22hh_init_interrupt(dev) < 0) {
LOG_ERR("Failed to initialize interrupt.");
return -EIO;
}
#endif
return 0;
}
#if DT_NUM_INST_STATUS_OKAY(DT_DRV_COMPAT) == 0
#warning "LPS22HH driver enabled without any devices"
#endif
/*
* Instantiation macros used when a device is on a SPI bus.
*/
#ifdef CONFIG_LPS22HH_TRIGGER
#define LPS22HH_CFG_IRQ(inst) \
.gpio_int = GPIO_DT_SPEC_INST_GET(inst, drdy_gpios),
#else
#define LPS22HH_CFG_IRQ(inst)
#endif /* CONFIG_LPS22HH_TRIGGER */
#define LPS22HH_CONFIG_COMMON(inst) \
.odr = DT_INST_PROP(inst, odr), \
COND_CODE_1(DT_INST_NODE_HAS_PROP(inst, drdy_gpios), \
(LPS22HH_CFG_IRQ(inst)), ())
#define LPS22HH_SPI_OPERATION (SPI_WORD_SET(8) | \
SPI_OP_MODE_MASTER | \
SPI_MODE_CPOL | \
SPI_MODE_CPHA) \
#define LPS22HH_CONFIG_SPI(inst) \
{ \
STMEMSC_CTX_SPI(&lps22hh_config_##inst.stmemsc_cfg), \
.stmemsc_cfg = { \
.spi = SPI_DT_SPEC_INST_GET(inst, \
LPS22HH_SPI_OPERATION, \
0), \
}, \
LPS22HH_CONFIG_COMMON(inst) \
}
/*
* Instantiation macros used when a device is on an I2C bus.
*/
#define LPS22HH_CONFIG_I2C(inst) \
{ \
STMEMSC_CTX_I2C(&lps22hh_config_##inst.stmemsc_cfg), \
.stmemsc_cfg = { \
.i2c = I2C_DT_SPEC_INST_GET(inst), \
}, \
LPS22HH_CONFIG_COMMON(inst) \
}
/*
* Instantiation macros used when a device is on an I#C bus.
*/
#define LPS22HH_CONFIG_I3C(inst) \
{ \
STMEMSC_CTX_I3C(&lps22hh_config_##inst.stmemsc_cfg), \
.stmemsc_cfg = { \
.i3c = &lps22hh_data_##inst.i3c_dev, \
}, \
.i3c.bus = DEVICE_DT_GET(DT_INST_BUS(inst)), \
.i3c.dev_id = I3C_DEVICE_ID_DT_INST(inst), \
LPS22HH_CONFIG_COMMON(inst) \
}
#define LPS22HH_CONFIG_I3C_OR_I2C(inst) \
COND_CODE_0(DT_INST_PROP_BY_IDX(inst, reg, 1), \
(LPS22HH_CONFIG_I2C(inst)), \
(LPS22HH_CONFIG_I3C(inst)))
/*
* Main instantiation macro. Use of COND_CODE_1() selects the right
* bus-specific macro at preprocessor time.
*/
#define LPS22HH_DEFINE(inst) \
static struct lps22hh_data lps22hh_data_##inst; \
static const struct lps22hh_config lps22hh_config_##inst = \
COND_CODE_1(DT_INST_ON_BUS(inst, spi), \
(LPS22HH_CONFIG_SPI(inst)), \
(COND_CODE_1(DT_INST_ON_BUS(inst, i3c), \
(LPS22HH_CONFIG_I3C_OR_I2C(inst)), \
(LPS22HH_CONFIG_I2C(inst))))); \
SENSOR_DEVICE_DT_INST_DEFINE(inst, lps22hh_init, NULL, &lps22hh_data_##inst, \
&lps22hh_config_##inst, POST_KERNEL, \
CONFIG_SENSOR_INIT_PRIORITY, &lps22hh_driver_api);
DT_INST_FOREACH_STATUS_OKAY(LPS22HH_DEFINE)