| /* |
| * Copyright (c) 2023 ENE Technology Inc. |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <freq.h> |
| #include <arm/armv7-m.dtsi> |
| |
| / { |
| chosen { |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m4"; |
| reg = <0>; |
| clock-frequency = <DT_FREQ_M(48)>; |
| }; |
| }; |
| |
| sram0: memory@20040000 { |
| compatible = "mmio-sram"; |
| reg = <0x20040000 0x10000>; |
| }; |
| |
| soc { |
| flash-controller@50100000 { |
| compatible = "ene,kb1200-flash-controller"; |
| reg = <0x50100000 0x2000>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| flash0: flash@10000000 { |
| compatible = "soc-nv-flash"; |
| reg = <0x10000000 0x40000>; |
| }; |
| }; |
| |
| pmu: pmu@40010000 { |
| compatible = "ene,kb1200-pmu"; |
| reg = <0x40010000 0x100>; |
| }; |
| |
| gcfg: gcfg@40000000 { |
| compatible = "ene,kb1200-gcfg"; |
| reg = <0x40000000 0x100>; |
| }; |
| |
| pinctrl: pin-controller@50000000 { |
| compatible = "ene,kb1200-pinctrl"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| reg = <0x50000000 0x100>; |
| status = "okay"; |
| gpio0x1x: gpio@50000000 { |
| compatible = "ene,kb1200-gpio"; |
| reg = <0x50000000 0x04>, <0x50010000 0x04>; |
| interrupts = <2 3>, <3 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <32>; |
| status = "disabled"; |
| }; |
| |
| gpio2x3x: gpio@50000004 { |
| compatible = "ene,kb1200-gpio"; |
| reg = <0x50000004 0x04>, <0x50010004 0x04>; |
| interrupts = <4 3>, <5 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <32>; |
| status = "disabled"; |
| }; |
| |
| gpio4x5x: gpio@50000008 { |
| compatible = "ene,kb1200-gpio"; |
| reg = <0x50000008 0x04>, <0x50010008 0x04>; |
| interrupts = <6 3>, <7 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <32>; |
| status = "disabled"; |
| }; |
| |
| gpio6x7x: gpio@5000000c { |
| compatible = "ene,kb1200-gpio"; |
| reg = <0x5000000C 0x04>, <0x5001000C 0x04>; |
| interrupts = <8 3>, <9 3>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| ngpios = <32>; |
| status = "disabled"; |
| }; |
| }; |
| |
| uart0: serial@40310000 { |
| compatible = "ene,kb1200-uart"; |
| reg = <0x40310000 0x4c>; |
| interrupts = <20 3>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@40310020 { |
| compatible = "ene,kb1200-uart"; |
| reg = <0x40310020 0x4c>; |
| interrupts = <20 3>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@40310040 { |
| compatible = "ene,kb1200-uart"; |
| reg = <0x40310040 0x4c>; |
| interrupts = <20 3>; |
| current-speed = <115200>; |
| status = "disabled"; |
| }; |
| |
| adc0: adc0@40130000 { |
| compatible = "ene,kb1200-adc"; |
| reg = <0x40130000 0x100>; |
| status = "disabled"; |
| #io-channel-cells = <1>; |
| }; |
| |
| pwm0: pwm@40210000 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210000 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@40210010 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210010 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@40210020 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210020 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@40210030 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210030 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm4: pwm@40210040 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210040 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm5: pwm@40210050 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210050 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm6: pwm@40210060 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210060 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm7: pwm@40210070 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210070 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm8: pwm@40210080 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210080 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| pwm9: pwm@40210090 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40210090 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| fanpwm0: pwm@40200000 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40200000 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| fanpwm1: pwm@40200010 { |
| compatible = "ene,kb1200-pwm"; |
| reg = <0x40200010 0x10>; |
| #pwm-cells = <3>; |
| status = "disabled"; |
| }; |
| |
| tach0: tach@40100000 { |
| compatible = "ene,kb1200-tach"; |
| reg = <0x40100000 0x10>; |
| status = "disabled"; |
| }; |
| |
| tach1: tach@40100010 { |
| compatible = "ene,kb1200-tach"; |
| reg = <0x40100010 0x10>; |
| status = "disabled"; |
| }; |
| |
| tach2: tach@40100020 { |
| compatible = "ene,kb1200-tach"; |
| reg = <0x40100020 0x10>; |
| status = "disabled"; |
| }; |
| |
| tach3: tach@40100030 { |
| compatible = "ene,kb1200-tach"; |
| reg = <0x40100030 0x10>; |
| status = "disabled"; |
| }; |
| |
| wdt0: watchdog@40060000 { |
| compatible = "ene,kb1200-watchdog"; |
| reg = <0x40060000 0x100>; |
| interrupts = <0 0>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@40340000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40340000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@40341000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40341000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@40342000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40342000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@40343000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40343000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@40344000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40344000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@40345000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40345000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@40346000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40346000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@40347000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40347000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c8: i2c@40348000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40348000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c9: i2c@40349000 { |
| compatible = "ene,kb1200-i2c"; |
| reg = <0x40349000 0x1000>; |
| interrupts = <17 1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
| |
| &nvic { |
| arm,num-irq-priority-bits = <3>; |
| }; |
