| /* |
| * Copyright (c) Bobby Noelte |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <st/f0/stm32f071.dtsi> |
| |
| / { |
| soc { |
| compatible = "st,stm32f091", "st,stm32f0", "simple-bus"; |
| |
| /* |
| * USARTs 3-8 share the same IRQ on stm32f091xx devices. This |
| * configuration is not currently supported, so at most one of |
| * these may be enabled at a time. Enabling more than one will |
| * result in a build failure. |
| */ |
| usart5: serial@40005000 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40005000 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>; |
| resets = <&rctl STM32_RESET(APB1, 20U)>; |
| interrupts = <29 0>; |
| status = "disabled"; |
| }; |
| |
| usart6: serial@40011400 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40011400 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000020>; |
| resets = <&rctl STM32_RESET(APB2, 5U)>; |
| interrupts = <29 0>; |
| status = "disabled"; |
| }; |
| |
| usart7: serial@40011800 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40011800 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000040>; |
| resets = <&rctl STM32_RESET(APB2, 6U)>; |
| interrupts = <29 0>; |
| status = "disabled"; |
| }; |
| |
| usart8: serial@40011c00 { |
| compatible = "st,stm32-usart", "st,stm32-uart"; |
| reg = <0x40011c00 0x400>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000080>; |
| resets = <&rctl STM32_RESET(APB2, 7U)>; |
| interrupts = <29 0>; |
| status = "disabled"; |
| }; |
| |
| can1: can@40006400 { |
| compatible = "st,stm32-bxcan"; |
| reg = <0x40006400 0x400>; |
| interrupts = <30 0>; |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x02000000>; |
| status = "disabled"; |
| }; |
| |
| dma2: dma@40020400 { |
| compatible = "st,stm32-dma-v2bis"; |
| #dma-cells = <2>; |
| reg = <0x40020400 0x400>; |
| interrupts = <10 0 10 0 11 0 11 0 11 0>; |
| clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x2>; |
| status = "disabled"; |
| }; |
| }; |
| }; |
