blob: 1b8f540072253e0095000e2514fd10574bdfc0c2 [file] [log] [blame]
description: Kinetis LPUART
compatible: "nxp,kinetis-lpuart"
include: [uart-controller.yaml, pinctrl-device.yaml]
properties:
reg:
required: true
nxp,loopback:
type: boolean
description: |
Enable loopback mode on LPUART peripheral. When present, RX pin is
disconnected, and transmitter output is internally connected to
the receiver input.
nxp,rs485-mode:
type: boolean
description: |
Set to enable RTS signal, which can be used to enable the driver
of an external RS-485 transceiver. Note hw-flow-control should be
set to false.
nxp,rs485-de-active-low:
type: boolean
description: RTS polarity at RS485 mode.