blob: 041d0aad530710c52b422b5eaa5af22f04d2ff83 [file] [log] [blame]
/*
* Copyright (c) 2016-2017 Jean-Paul Etienne <fractalclone@gmail.com>
* Copyright (c) 2021 Andes Technology Corporation
*
* SPDX-License-Identifier: Apache-2.0
*/
/**
* @file
* @brief Linker command/script file
*
* Linker script for the ae350 platform
*/
#include <zephyr/devicetree.h>
#include <zephyr/linker/sections.h>
#include <zephyr/linker/devicetree_regions.h>
#include <zephyr/linker/linker-defs.h>
#include <zephyr/linker/linker-tool.h>
#ifdef CONFIG_XIP
#define ROMABLE_REGION ROM
#else
#define ROMABLE_REGION RAM
#endif
#define RAMABLE_REGION RAM
#define _EXCEPTION_SECTION_NAME exceptions
#define _RESET_SECTION_NAME reset
#ifdef CONFIG_XIP
#if DT_NODE_HAS_COMPAT_STATUS(DT_CHOSEN(zephyr_flash), soc_nv_flash, okay)
#ifdef CONFIG_FLASH_LOAD_OFFSET
#define ROM_BASE (DT_REG_ADDR(DT_CHOSEN(zephyr_flash)) + \
CONFIG_FLASH_LOAD_OFFSET)
#else /* !CONFIG_FLASH_LOAD_OFFSET */
#define ROM_BASE DT_REG_ADDR(DT_CHOSEN(zephyr_flash))
#endif /* CONFIG_FLASH_LOAD_OFFSET */
#define ROM_SIZE DT_REG_SIZE(DT_CHOSEN(zephyr_flash))
#elif DT_NODE_HAS_COMPAT(DT_CHOSEN(zephyr_flash), jedec_spi_nor)
/* For jedec,spi-nor we expect the spi controller to memory map the flash
* and for that mapping to be the second register property of the spi
* controller.
*/
#define SPI_CTRL DT_PARENT(DT_CHOSEN(zephyr_flash))
#define ROM_BASE DT_REG_ADDR_BY_IDX(SPI_CTRL, 1)
#define ROM_SIZE DT_REG_SIZE_BY_IDX(SPI_CTRL, 1)
#endif
#else /* CONFIG_XIP */
#define ROM_BASE CONFIG_SRAM_BASE_ADDRESS
#define ROM_SIZE KB(CONFIG_SRAM_SIZE)
#endif /* CONFIG_XIP */
#define RAM_BASE CONFIG_SRAM_BASE_ADDRESS
#define RAM_SIZE KB(CONFIG_SRAM_SIZE)
#ifdef CONFIG_RISCV_PMP
#define MPU_MIN_SIZE CONFIG_PMP_GRANULARITY
#define MPU_MIN_SIZE_ALIGN . = ALIGN(MPU_MIN_SIZE);
#if defined(CONFIG_MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT)
#define MPU_ALIGN(region_size) \
. = ALIGN(MPU_MIN_SIZE); \
. = ALIGN( 1 << LOG2CEIL(region_size))
#else
#define MPU_ALIGN(region_size) \
. = ALIGN(MPU_MIN_SIZE)
#endif
#else
#define MPU_MIN_SIZE_ALIGN
#define MPU_ALIGN(region_size) . = ALIGN(4)
#endif
MEMORY
{
#ifdef CONFIG_XIP
ROM (rx) : ORIGIN = ROM_BASE, LENGTH = ROM_SIZE
#endif
RAM (rwx) : ORIGIN = RAM_BASE, LENGTH = RAM_SIZE
LINKER_DT_REGIONS()
/* Used by and documented in include/linker/intlist.ld */
IDT_LIST (wx) : ORIGIN = 0xFFFFF7FF, LENGTH = 2K
}
ENTRY(CONFIG_KERNEL_ENTRY)
SECTIONS
{
#include <zephyr/linker/rel-sections.ld>
/*
* The .plt and .iplt are here according to
* 'riscv32-zephyr-elf-ld --verbose', before text section.
*/
SECTION_PROLOGUE(.plt,,)
{
*(.plt)
}
SECTION_PROLOGUE(.iplt,,)
{
*(.iplt)
}
GROUP_START(ROMABLE_REGION)
SECTION_PROLOGUE(rom_start,,)
{
. = ALIGN(16);
MPU_ALIGN(__rom_region_size);
__rom_region_start = .;
/* Located in generated directory. This file is populated by calling
* zephyr_linker_sources(ROM_START ...).
*/
#include <snippets-rom-start.ld>
} GROUP_LINK_IN(ROMABLE_REGION)
#ifdef CONFIG_CODE_DATA_RELOCATION
#include <linker_relocate.ld>
#endif
SECTION_PROLOGUE(_RESET_SECTION_NAME,,)
{
KEEP(*(.reset.*))
} GROUP_LINK_IN(ROMABLE_REGION)
SECTION_PROLOGUE(_EXCEPTION_SECTION_NAME,,)
{
KEEP(*(".exception.entry.*"))
*(".exception.other.*")
} GROUP_LINK_IN(ROMABLE_REGION)
SECTION_PROLOGUE(_TEXT_SECTION_NAME,,)
{
. = ALIGN(4);
KEEP(*(.openocd_debug))
KEEP(*(".openocd_debug.*"))
__text_region_start = .;
*(.text)
*(".text.*")
*(.gnu.linkonce.t.*)
#include <zephyr/linker/kobject-text.ld>
} GROUP_LINK_IN(ROMABLE_REGION)
__text_region_end = .;
__rodata_region_start = .;
#include <zephyr/linker/common-rom.ld>
#include <zephyr/linker/thread-local-storage.ld>
SECTION_PROLOGUE(_RODATA_SECTION_NAME,,)
{
. = ALIGN(4);
*(.srodata)
*(".srodata.*")
*(.rodata)
*(".rodata.*")
*(.gnu.linkonce.r.*)
*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)
/* Located in generated directory. This file is populated by the
* zephyr_linker_sources() Cmake function.
*/
#include <snippets-rodata.ld>
#include <zephyr/linker/kobject-rom.ld>
. = ALIGN(4);
} GROUP_LINK_IN(ROMABLE_REGION)
#include <zephyr/linker/cplusplus-rom.ld>
__rodata_region_end = .;
/* For non-XIP system, __rom_region_end symbol should be set to
* the end of common ROMABLE_REGIONs (text and rodata) instead of
* the linker script end, so it wouldn't mistakenly contain
* RAMABLE_REGION in it.
*/
#ifndef CONFIG_XIP
#ifdef CONFIG_RISCV_PMP
SECTION_PROLOGUE(rom_mpu_padding,,)
{
MPU_ALIGN(__rodata_region_end - __rom_region_start);
} GROUP_LINK_IN(ROMABLE_REGION)
#endif /* CONFIG_RISCV_PMP */
__rom_region_end = .;
__rom_region_size = __rom_region_end - __rom_region_start;
#endif /* CONFIG_XIP */
GROUP_END(ROMABLE_REGION)
GROUP_START(RAMABLE_REGION)
. = RAM_BASE;
_image_ram_start = .;
#ifdef CONFIG_SOC_ANDES_V5_PMA
#pragma push_macro("MPU_ALIGN")
#undef MPU_ALIGN
/* Make linker section alignment comply with PMA granularity. */
#define MPU_ALIGN(region_size) \
. = ALIGN(CONFIG_SOC_ANDES_V5_PMA_REGION_MIN_ALIGN_AND_SIZE); \
. = ALIGN( 1 << LOG2CEIL(region_size))
#endif
/* Located in generated directory. This file is populated by the
* zephyr_linker_sources() Cmake function.
*/
#include <snippets-ram-sections.ld>
#ifdef CONFIG_SOC_ANDES_V5_PMA
#pragma pop_macro("MPU_ALIGN")
#endif
#if defined(CONFIG_USERSPACE)
#define APP_SHARED_ALIGN MPU_MIN_SIZE_ALIGN
#define SMEM_PARTITION_ALIGN MPU_ALIGN
#include <app_smem.ld>
_app_smem_size = _app_smem_end - _app_smem_start;
_app_smem_rom_start = LOADADDR(_APP_SMEM_SECTION_NAME);
#endif /* CONFIG_USERSPACE */
SECTION_DATA_PROLOGUE(_BSS_SECTION_NAME,(NOLOAD),)
{
MPU_MIN_SIZE_ALIGN
/*
* For performance, BSS section is assumed to be 4 byte aligned and
* a multiple of 4 bytes
*/
. = ALIGN(4);
__bss_start = .;
__kernel_ram_start = .;
*(.sbss)
*(".sbss.*")
*(.bss)
*(".bss.*")
COMMON_SYMBOLS
#ifdef CONFIG_CODE_DATA_RELOCATION
#include <linker_sram_bss_relocate.ld>
#endif
/*
* As memory is cleared in words only, it is simpler to ensure the BSS
* section ends on a 4 byte boundary. This wastes a maximum of 3 bytes.
*/
__bss_end = ALIGN(4);
} GROUP_DATA_LINK_IN(RAMABLE_REGION, RAMABLE_REGION)
#include <zephyr/linker/common-noinit.ld>
SECTION_DATA_PROLOGUE(_DATA_SECTION_NAME,,)
{
. = ALIGN(4);
/* _image_ram_start = .; */
__data_region_start = .;
__data_start = .;
*(.data)
*(".data.*")
#ifdef CONFIG_RISCV_GP
/*
* RISC-V architecture has 12-bit signed immediate offsets in the
* instructions. If we can put the most commonly accessed globals
* in a special 4K span of memory addressed by the GP register, then
* we can access those values in a single instruction, saving both
* codespace and runtime.
*
* Since these immediate offsets are signed, place gp 0x800 past the
* beginning of .sdata so that we can use both positive and negative
* offsets.
*/
. = ALIGN(8);
PROVIDE (__global_pointer$ = . + 0x800);
#endif
*(.sdata .sdata.* .gnu.linkonce.s.*)
/* Located in generated directory. This file is populated by the
* zephyr_linker_sources() Cmake function.
*/
#include <snippets-rwdata.ld>
#ifdef CONFIG_CODE_DATA_RELOCATION
#include <linker_sram_data_relocate.ld>
#endif
__data_end = .;
} GROUP_DATA_LINK_IN(RAMABLE_REGION, ROMABLE_REGION)
__data_size = __data_end - __data_start;
__data_load_start = LOADADDR(_DATA_SECTION_NAME);
__data_region_load_start = LOADADDR(_DATA_SECTION_NAME);
#include <zephyr/linker/common-ram.ld>
#include <zephyr/linker/kobject-data.ld>
#include <zephyr/linker/cplusplus-ram.ld>
/* Located in generated directory. This file is populated by the
* zephyr_linker_sources() Cmake function.
*/
#include <snippets-data-sections.ld>
__data_region_end = .;
__kernel_ram_end = .;
__kernel_ram_size = __kernel_ram_end - __kernel_ram_start;
#if DT_NODE_HAS_STATUS(DT_CHOSEN(zephyr_itcm), okay)
GROUP_START(ITCM)
SECTION_PROLOGUE(_ITCM_SECTION_NAME,,SUBALIGN(8))
{
__itcm_start = .;
*(.itcm)
*(".itcm.*")
/* Located in generated directory. This file is populated by the
* zephyr_linker_sources() Cmake function. */
#include <snippets-itcm-section.ld>
__itcm_end = .;
} GROUP_LINK_IN(ITCM AT> ROMABLE_REGION)
__itcm_size = __itcm_end - __itcm_start;
__itcm_load_start = LOADADDR(_ITCM_SECTION_NAME);
GROUP_END(ITCM)
#endif
#if DT_NODE_HAS_STATUS(DT_CHOSEN(zephyr_dtcm), okay)
GROUP_START(DTCM)
SECTION_PROLOGUE(_DTCM_BSS_SECTION_NAME, (NOLOAD),SUBALIGN(8))
{
__dtcm_start = .;
__dtcm_bss_start = .;
*(.dtcm_bss)
*(".dtcm_bss.*")
__dtcm_bss_end = .;
} GROUP_LINK_IN(DTCM)
SECTION_PROLOGUE(_DTCM_NOINIT_SECTION_NAME, (NOLOAD),SUBALIGN(8))
{
__dtcm_noinit_start = .;
*(.dtcm_noinit)
*(".dtcm_noinit.*")
__dtcm_noinit_end = .;
} GROUP_LINK_IN(DTCM)
SECTION_PROLOGUE(_DTCM_DATA_SECTION_NAME,,SUBALIGN(8))
{
__dtcm_data_start = .;
*(.dtcm_data)
*(".dtcm_data.*")
/* Located in generated directory. This file is populated by the
* zephyr_linker_sources() Cmake function. */
#include <snippets-dtcm-section.ld>
__dtcm_data_end = .;
} GROUP_LINK_IN(DTCM AT> ROMABLE_REGION)
__dtcm_end = .;
__dtcm_data_load_start = LOADADDR(_DTCM_DATA_SECTION_NAME);
GROUP_END(DTCM)
#endif
/* Located in generated directory. This file is populated by the
* zephyr_linker_sources() Cmake function.
*/
#include <snippets-sections.ld>
#define LAST_RAM_ALIGN MPU_MIN_SIZE_ALIGN
#include <zephyr/linker/ram-end.ld>
GROUP_END(RAMABLE_REGION)
#include <zephyr/linker/debug-sections.ld>
/DISCARD/ : { *(.note.GNU-stack) }
SECTION_PROLOGUE(.riscv.attributes, 0,)
{
KEEP(*(.riscv.attributes))
KEEP(*(.gnu.attributes))
}
/* Sections generated from 'zephyr,memory-region' nodes */
LINKER_DT_SECTIONS()
/* Because ROMABLE_REGION != RAMABLE_REGION in XIP-system, it is valid
* to set __rom_region_end symbol at the end of linker script and
* doesn't mistakenly contain the RAMABLE_REGION in it.
*/
#ifdef CONFIG_XIP
/* Must be last in romable region */
SECTION_PROLOGUE(.last_section,,)
{
#ifdef CONFIG_LINKER_LAST_SECTION_ID
/* Fill last section with a word to ensure location counter and actual rom
* region data usage match. */
LONG(CONFIG_LINKER_LAST_SECTION_ID_PATTERN)
#endif
} GROUP_LINK_IN(ROMABLE_REGION)
#ifndef CONFIG_RISCV_PMP
/* To provide the image size as a const expression,
* calculate this value here. */
__rom_region_end = LOADADDR(.last_section) + SIZEOF(.last_section);
#else
SECTION_PROLOGUE(rom_mpu_padding,(NOLOAD),)
{
MPU_ALIGN(__rom_region_size);
__rom_region_end = .;
} GROUP_LINK_IN(ROMABLE_REGION)
#endif /* !CONFIG_RISCV_PMP */
__rom_region_size = __rom_region_end - __rom_region_start;
#endif
}