drivers/led/ht16k33.c - third_party/github/zephyrproject-rtos/zephyr - Git at Google

 /*
  * Copyright (c) 2019 Henrik Brix Andersen <henrik@brixandersen.dk>
  *
  * SPDX-License-Identifier: Apache-2.0
  */

 #define DT_DRV_COMPAT holtek_ht16k33

 /**
  * @file
  * @brief LED driver for the HT16K33 I2C LED driver with keyscan
  */

 #include <drivers/gpio.h>
 #include <drivers/i2c.h>
 #include <kernel.h>
 #include <drivers/led.h>
 #include <drivers/led/ht16k33.h>
 #include <sys/byteorder.h>
 #include <logging/log.h>

 LOG_MODULE_REGISTER(ht16k33, CONFIG_LED_LOG_LEVEL);

 #include "led_context.h"

 /* HT16K33 commands and options */
 #define HT16K33_CMD_DISP_DATA_ADDR 0x00

 #define HT16K33_CMD_SYSTEM_SETUP   0x20
 #define HT16K33_OPT_S              BIT(0)

 #define HT16K33_CMD_KEY_DATA_ADDR  0x40

 #define HT16K33_CMD_INT_FLAG_ADDR  0x60

 #define HT16K33_CMD_DISP_SETUP     0x80
 #define HT16K33_OPT_D              BIT(0)
 #define HT16K33_OPT_B0             BIT(1)
 #define HT16K33_OPT_B1             BIT(2)
 #define HT16K33_OPT_BLINK_OFF      0
 #define HT16K33_OPT_BLINK_2HZ      HT16K33_OPT_B0
 #define HT16K33_OPT_BLINK_1HZ      HT16K33_OPT_B1
 #define HT16K33_OPT_BLINK_05HZ     (HT16K33_OPT_B1 | HT16K33_OPT_B0)

 #define HT16K33_CMD_ROW_INT_SET    0xa0
 #define HT16K33_OPT_ROW_INT        BIT(0)
 #define HT16K33_OPT_ACT            BIT(1)
 #define HT16K33_OPT_ROW            0
 #define HT16K33_OPT_INT_LOW        HT16K33_OPT_ROW_INT
 #define HT16K33_OPT_INT_HIGH       (HT16K33_OPT_ACT | HT16K33_OPT_ROW_INT)

 #define HT16K33_CMD_DIMMING_SET    0xe0

 /* HT16K33 size definitions */
 #define HT16K33_DISP_ROWS          16
 #define HT16K33_DISP_COLS          8
 #define HT16K33_DISP_DATA_SIZE     HT16K33_DISP_ROWS
 #define HT16K33_DISP_SEGMENTS      (HT16K33_DISP_ROWS * HT16K33_DISP_COLS)
 #define HT16K33_DIMMING_LEVELS     16
 #define HT16K33_KEYSCAN_ROWS       3
 #define HT16K33_KEYSCAN_COLS       13
 #define HT16K33_KEYSCAN_DATA_SIZE  6

 struct ht16k33_cfg {
 	const struct device *i2c_dev;
 	uint16_t i2c_addr;
 	bool irq_enabled;
 #ifdef CONFIG_HT16K33_KEYSCAN
 	struct gpio_dt_spec irq;
 #endif /* CONFIG_HT16K33_KEYSCAN */
 };

 struct ht16k33_data {
 	const struct device *dev;
 	struct led_data dev_data;
 	 /* Shadow buffer for the display data RAM */
 	uint8_t buffer[HT16K33_DISP_DATA_SIZE];
 #ifdef CONFIG_HT16K33_KEYSCAN
 	struct k_mutex lock;
 	const struct device *child;
 	kscan_callback_t kscan_cb;
 	struct gpio_callback irq_cb;
 	struct k_thread irq_thread;
 	struct k_sem irq_sem;
 	struct k_timer timer;
 	uint16_t key_state[HT16K33_KEYSCAN_ROWS];

 	K_KERNEL_STACK_MEMBER(irq_thread_stack,
 			      CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_STACK_SIZE);
 #endif /* CONFIG_HT16K33_KEYSCAN */
 };

 static int ht16k33_led_blink(const struct device *dev, uint32_t led,
 			     uint32_t delay_on, uint32_t delay_off)
 {
 	/* The HT16K33 blinks all LEDs at the same frequency */
 	ARG_UNUSED(led);

 	const struct ht16k33_cfg *config = dev->config;
 	struct ht16k33_data *data = dev->data;
 	struct led_data *dev_data = &data->dev_data;
 	uint32_t period;
 	uint8_t cmd;

 	period = delay_on + delay_off;
 	if (period < dev_data->min_period || period > dev_data->max_period) {
 		return -EINVAL;
 	}

 	cmd = HT16K33_CMD_DISP_SETUP | HT16K33_OPT_D;
 	if (delay_off == 0) {
 		cmd |= HT16K33_OPT_BLINK_OFF;
 	} else if (period > 1500)  {
 		cmd |= HT16K33_OPT_BLINK_05HZ;
 	} else if (period > 750)  {
 		cmd |= HT16K33_OPT_BLINK_1HZ;
 	} else {
 		cmd |= HT16K33_OPT_BLINK_2HZ;
 	}

 	if (i2c_write(config->i2c_dev, &cmd, sizeof(cmd), config->i2c_addr)) {
 		LOG_ERR("Setting HT16K33 blink frequency failed");
 		return -EIO;
 	}

 	return 0;
 }

 static int ht16k33_led_set_brightness(const struct device *dev, uint32_t led,
 				      uint8_t value)
 {
 	ARG_UNUSED(led);

 	const struct ht16k33_cfg *config = dev->config;
 	struct ht16k33_data *data = dev->data;
 	struct led_data *dev_data = &data->dev_data;
 	uint8_t dim;
 	uint8_t cmd;

 	if (value < dev_data->min_brightness ||
 	    value > dev_data->max_brightness) {
 		return -EINVAL;
 	}

 	dim = (value * (HT16K33_DIMMING_LEVELS - 1)) / dev_data->max_brightness;
 	cmd = HT16K33_CMD_DIMMING_SET | dim;

 	if (i2c_write(config->i2c_dev, &cmd, sizeof(cmd), config->i2c_addr)) {
 		LOG_ERR("Setting HT16K33 brightness failed");
 		return -EIO;
 	}

 	return 0;
 }

 static int ht16k33_led_set_state(const struct device *dev, uint32_t led,
 				 bool on)
 {
 	const struct ht16k33_cfg *config = dev->config;
 	struct ht16k33_data *data = dev->data;
 	uint8_t cmd[2];
 	uint8_t addr;
 	uint8_t bit;

 	if (led >= HT16K33_DISP_SEGMENTS) {
 		return -EINVAL;
 	}

 	addr = led / HT16K33_DISP_COLS;
 	bit = led % HT16K33_DISP_COLS;

 	cmd[0] = HT16K33_CMD_DISP_DATA_ADDR | addr;
 	if (on) {
 		cmd[1] = data->buffer[addr] | BIT(bit);
 	} else {
 		cmd[1] = data->buffer[addr] & ~BIT(bit);
 	}

 	if (data->buffer[addr] == cmd[1]) {
 		return 0;
 	}

 	if (i2c_write(config->i2c_dev, cmd, sizeof(cmd), config->i2c_addr)) {
 		LOG_ERR("Setting HT16K33 LED %s failed", on ? "on" : "off");
 		return -EIO;
 	}

 	data->buffer[addr] = cmd[1];

 	return 0;
 }

 static int ht16k33_led_on(const struct device *dev, uint32_t led)
 {
 	return ht16k33_led_set_state(dev, led, true);
 }

 static int ht16k33_led_off(const struct device *dev, uint32_t led)
 {
 	return ht16k33_led_set_state(dev, led, false);
 }

 #ifdef CONFIG_HT16K33_KEYSCAN
 static bool ht16k33_process_keyscan_data(const struct device *dev)
 {
 	const struct ht16k33_cfg *config = dev->config;
 	struct ht16k33_data *data = dev->data;
 	uint8_t keys[HT16K33_KEYSCAN_DATA_SIZE];
 	bool pressed = false;
 	uint16_t state;
 	uint16_t changed;
 	int row;
 	int col;
 	int err;

 	err = i2c_burst_read(config->i2c_dev, config->i2c_addr,
 			     HT16K33_CMD_KEY_DATA_ADDR, keys,
 			     sizeof(keys));
 	if (err) {
 		LOG_WRN("Failed to to read HT16K33 key data (err %d)", err);
 		/* Reprocess */
 		return true;
 	}

 	k_mutex_lock(&data->lock, K_FOREVER);

 	for (row = 0; row < HT16K33_KEYSCAN_ROWS; row++) {
 		state = sys_get_le16(&keys[row * 2]);
 		changed = data->key_state[row] ^ state;
 		data->key_state[row] = state;

 		if (state) {
 			pressed = true;
 		}

 		if (data->kscan_cb == NULL) {
 			continue;
 		}

 		for (col = 0; col < HT16K33_KEYSCAN_COLS; col++) {
 			if (changed & BIT(col)) {
 				data->kscan_cb(data->child, row, col,
 					state & BIT(col));
 			}
 		}
 	}

 	k_mutex_unlock(&data->lock);

 	return pressed;
 }

 static void ht16k33_irq_thread(struct ht16k33_data *data)
 {
 	bool pressed;

 	while (true) {
 		k_sem_take(&data->irq_sem, K_FOREVER);

 		do {
 			k_sem_reset(&data->irq_sem);
 			pressed = ht16k33_process_keyscan_data(data->dev);
 			k_msleep(CONFIG_HT16K33_KEYSCAN_DEBOUNCE_MSEC);
 		} while (pressed);
 	}
 }

 static void ht16k33_irq_callback(const struct device *gpiob,
 				 struct gpio_callback *cb, uint32_t pins)
 {
 	struct ht16k33_data *data;

 	ARG_UNUSED(gpiob);
 	ARG_UNUSED(pins);

 	data = CONTAINER_OF(cb, struct ht16k33_data, irq_cb);
 	k_sem_give(&data->irq_sem);
 }

 static void ht16k33_timer_callback(struct k_timer *timer)
 {
 	struct ht16k33_data *data;

 	data = CONTAINER_OF(timer, struct ht16k33_data, timer);
 	k_sem_give(&data->irq_sem);
 }

 int ht16k33_register_keyscan_callback(const struct device *parent,
 				      const struct device *child,
 				      kscan_callback_t callback)
 {
 	struct ht16k33_data *data = parent->data;

 	k_mutex_lock(&data->lock, K_FOREVER);
 	data->child = child;
 	data->kscan_cb = callback;
 	k_mutex_unlock(&data->lock);

 	return 0;
 }
 #endif /* CONFIG_HT16K33_KEYSCAN */

 static int ht16k33_init(const struct device *dev)
 {
 	const struct ht16k33_cfg *config = dev->config;
 	struct ht16k33_data *data = dev->data;
 	struct led_data *dev_data = &data->dev_data;
 	uint8_t cmd[1 + HT16K33_DISP_DATA_SIZE]; /* 1 byte command + data */
 	int err;

 	data->dev = dev;

 	if (!device_is_ready(config->i2c_dev)) {
 		LOG_ERR("I2C bus device not ready");
 		return -EINVAL;
 	}

 	memset(&data->buffer, 0, sizeof(data->buffer));

 	/* Hardware specific limits */
 	dev_data->min_period = 0U;
 	dev_data->max_period = 2000U;
 	dev_data->min_brightness = 0U;
 	dev_data->max_brightness = 100U;

 	/* System oscillator on */
 	cmd[0] = HT16K33_CMD_SYSTEM_SETUP | HT16K33_OPT_S;
 	err = i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr);
 	if (err) {
 		LOG_ERR("Enabling HT16K33 system oscillator failed (err %d)",
 			err);
 		return -EIO;
 	}

 	/* Clear display RAM */
 	memset(cmd, 0, sizeof(cmd));
 	cmd[0] = HT16K33_CMD_DISP_DATA_ADDR;
 	err = i2c_write(config->i2c_dev, cmd, sizeof(cmd), config->i2c_addr);
 	if (err) {
 		LOG_ERR("Clearing HT16K33 display RAM failed (err %d)", err);
 		return -EIO;
 	}

 	/* Full brightness */
 	cmd[0] = HT16K33_CMD_DIMMING_SET | 0x0f;
 	err = i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr);
 	if (err) {
 		LOG_ERR("Setting HT16K33 brightness failed (err %d)", err);
 		return -EIO;
 	}

 	/* Display on, blinking off */
 	cmd[0] = HT16K33_CMD_DISP_SETUP | HT16K33_OPT_D | HT16K33_OPT_BLINK_OFF;
 	err = i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr);
 	if (err) {
 		LOG_ERR("Enabling HT16K33 display failed (err %d)", err);
 		return -EIO;
 	}

 #ifdef CONFIG_HT16K33_KEYSCAN
 	k_mutex_init(&data->lock);
 	k_sem_init(&data->irq_sem, 0, 1);

 	/* Configure interrupt */
 	if (config->irq_enabled) {
 		uint8_t keys[HT16K33_KEYSCAN_DATA_SIZE];

 		if (!device_is_ready(config->irq.port)) {
 			LOG_ERR("IRQ device not ready");
 			return -EINVAL;
 		}

 		err = gpio_pin_configure_dt(&config->irq, GPIO_INPUT);
 		if (err) {
 			LOG_ERR("Failed to configure IRQ pin (err %d)", err);
 			return -EINVAL;
 		}

 		gpio_init_callback(&data->irq_cb, &ht16k33_irq_callback,
 				   BIT(config->irq.pin));

 		err = gpio_add_callback(config->irq.port, &data->irq_cb);
 		if (err) {
 			LOG_ERR("Failed to add IRQ callback (err %d)", err);
 			return -EINVAL;
 		}

 		/* Enable interrupt pin */
 		cmd[0] = HT16K33_CMD_ROW_INT_SET | HT16K33_OPT_INT_LOW;
 		if (i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr)) {
 			LOG_ERR("Enabling HT16K33 IRQ output failed");
 			return -EIO;
 		}

 		/* Flush key data before enabling interrupt */
 		err = i2c_burst_read(config->i2c_dev, config->i2c_addr,
 				HT16K33_CMD_KEY_DATA_ADDR, keys, sizeof(keys));
 		if (err) {
 			LOG_ERR("Failed to to read HT16K33 key data");
 			return -EIO;
 		}

 		err = gpio_pin_interrupt_configure_dt(&config->irq,
 						      GPIO_INT_EDGE_FALLING);
 		if (err) {
 			LOG_ERR("Failed to configure IRQ pin flags (err %d)",
 				err);
 			return -EINVAL;
 		}
 	} else {
 		/* No interrupt pin, enable ROW15 */
 		cmd[0] = HT16K33_CMD_ROW_INT_SET | HT16K33_OPT_ROW;
 		if (i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr)) {
 			LOG_ERR("Enabling HT16K33 ROW15 output failed");
 			return -EIO;
 		}

 		/* Setup timer for polling key data */
 		k_timer_init(&data->timer, ht16k33_timer_callback, NULL);
 		k_timer_start(&data->timer, K_NO_WAIT,
 			      K_MSEC(CONFIG_HT16K33_KEYSCAN_POLL_MSEC));
 	}

 	k_thread_create(&data->irq_thread, data->irq_thread_stack,
 			CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_STACK_SIZE,
 			(k_thread_entry_t)ht16k33_irq_thread, data, NULL, NULL,
 			K_PRIO_COOP(CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_PRIO),
 			0, K_NO_WAIT);
 #endif /* CONFIG_HT16K33_KEYSCAN */

 	return 0;
 }

 static const struct led_driver_api ht16k33_leds_api = {
 	.blink = ht16k33_led_blink,
 	.set_brightness = ht16k33_led_set_brightness,
 	.on = ht16k33_led_on,
 	.off = ht16k33_led_off,
 };

 #define HT16K33_DEVICE(id)						\
 	static const struct ht16k33_cfg ht16k33_##id##_cfg = {		\
 		.i2c_dev      = DEVICE_DT_GET(DT_INST_BUS(id)),		\
 		.i2c_addr     = DT_INST_REG_ADDR(id),			\
 		.irq_enabled  = false,					\
 	};								\
 									\
 	static struct ht16k33_data ht16k33_##id##_data;			\
 									\
 	DEVICE_DT_INST_DEFINE(id, &ht16k33_init, NULL,			\
 			    &ht16k33_##id##_data,			\
 			    &ht16k33_##id##_cfg, POST_KERNEL,		\
 			    CONFIG_LED_INIT_PRIORITY, &ht16k33_leds_api)

 #ifdef CONFIG_HT16K33_KEYSCAN
 #define HT16K33_DEVICE_WITH_IRQ(id)					\
 	static const struct ht16k33_cfg ht16k33_##id##_cfg = {		\
 		.i2c_dev      = DEVICE_DT_GET(DT_INST_BUS(id)),		\
 		.i2c_addr     = DT_INST_REG_ADDR(id),			\
 		.irq_enabled  = true,					\
 		.irq          =	GPIO_DT_SPEC_INST_GET(id, irq_gpios),	\
 	};								\
 									\
 	static struct ht16k33_data ht16k33_##id##_data;			\
 									\
 	DEVICE_DT_INST_DEFINE(id, &ht16k33_init, NULL,			\
 			    &ht16k33_##id##_data,			\
 			    &ht16k33_##id##_cfg, POST_KERNEL,		\
 			    CONFIG_LED_INIT_PRIORITY, &ht16k33_leds_api)
 #else /* ! CONFIG_HT16K33_KEYSCAN */
 #define HT16K33_DEVICE_WITH_IRQ(id) HT16K33_DEVICE(id)
 #endif /* ! CONFIG_HT16K33_KEYSCAN */

 #define HT16K33_INSTANTIATE(id)					\
 	COND_CODE_1(DT_INST_NODE_HAS_PROP(id, irq_gpios),	\
 		    (HT16K33_DEVICE_WITH_IRQ(id)),		\
 		    (HT16K33_DEVICE(id)));

 DT_INST_FOREACH_STATUS_OKAY(HT16K33_INSTANTIATE)
	/*
	* Copyright (c) 2019 Henrik Brix Andersen <henrik@brixandersen.dk>
	*
	* SPDX-License-Identifier: Apache-2.0
	*/

	#define DT_DRV_COMPAT holtek_ht16k33

	/**
	* @file
	* @brief LED driver for the HT16K33 I2C LED driver with keyscan
	*/

	#include <drivers/gpio.h>
	#include <drivers/i2c.h>
	#include <kernel.h>
	#include <drivers/led.h>
	#include <drivers/led/ht16k33.h>
	#include <sys/byteorder.h>
	#include <logging/log.h>

	LOG_MODULE_REGISTER(ht16k33, CONFIG_LED_LOG_LEVEL);

	#include "led_context.h"

	/* HT16K33 commands and options */
	#define HT16K33_CMD_DISP_DATA_ADDR 0x00

	#define HT16K33_CMD_SYSTEM_SETUP 0x20
	#define HT16K33_OPT_S BIT(0)

	#define HT16K33_CMD_KEY_DATA_ADDR 0x40

	#define HT16K33_CMD_INT_FLAG_ADDR 0x60

	#define HT16K33_CMD_DISP_SETUP 0x80
	#define HT16K33_OPT_D BIT(0)
	#define HT16K33_OPT_B0 BIT(1)
	#define HT16K33_OPT_B1 BIT(2)
	#define HT16K33_OPT_BLINK_OFF 0
	#define HT16K33_OPT_BLINK_2HZ HT16K33_OPT_B0
	#define HT16K33_OPT_BLINK_1HZ HT16K33_OPT_B1
	#define HT16K33_OPT_BLINK_05HZ (HT16K33_OPT_B1 \| HT16K33_OPT_B0)

	#define HT16K33_CMD_ROW_INT_SET 0xa0
	#define HT16K33_OPT_ROW_INT BIT(0)
	#define HT16K33_OPT_ACT BIT(1)
	#define HT16K33_OPT_ROW 0
	#define HT16K33_OPT_INT_LOW HT16K33_OPT_ROW_INT
	#define HT16K33_OPT_INT_HIGH (HT16K33_OPT_ACT \| HT16K33_OPT_ROW_INT)

	#define HT16K33_CMD_DIMMING_SET 0xe0

	/* HT16K33 size definitions */
	#define HT16K33_DISP_ROWS 16
	#define HT16K33_DISP_COLS 8
	#define HT16K33_DISP_DATA_SIZE HT16K33_DISP_ROWS
	#define HT16K33_DISP_SEGMENTS (HT16K33_DISP_ROWS * HT16K33_DISP_COLS)
	#define HT16K33_DIMMING_LEVELS 16
	#define HT16K33_KEYSCAN_ROWS 3
	#define HT16K33_KEYSCAN_COLS 13
	#define HT16K33_KEYSCAN_DATA_SIZE 6

	struct ht16k33_cfg {
	const struct device *i2c_dev;
	uint16_t i2c_addr;
	bool irq_enabled;
	#ifdef CONFIG_HT16K33_KEYSCAN
	struct gpio_dt_spec irq;
	#endif /* CONFIG_HT16K33_KEYSCAN */
	};

	struct ht16k33_data {
	const struct device *dev;
	struct led_data dev_data;
	/* Shadow buffer for the display data RAM */
	uint8_t buffer[HT16K33_DISP_DATA_SIZE];
	#ifdef CONFIG_HT16K33_KEYSCAN
	struct k_mutex lock;
	const struct device *child;
	kscan_callback_t kscan_cb;
	struct gpio_callback irq_cb;
	struct k_thread irq_thread;
	struct k_sem irq_sem;
	struct k_timer timer;
	uint16_t key_state[HT16K33_KEYSCAN_ROWS];

	K_KERNEL_STACK_MEMBER(irq_thread_stack,
	CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_STACK_SIZE);
	#endif /* CONFIG_HT16K33_KEYSCAN */
	};

	static int ht16k33_led_blink(const struct device *dev, uint32_t led,
	uint32_t delay_on, uint32_t delay_off)
	{
	/* The HT16K33 blinks all LEDs at the same frequency */
	ARG_UNUSED(led);

	const struct ht16k33_cfg *config = dev->config;
	struct ht16k33_data *data = dev->data;
	struct led_data *dev_data = &data->dev_data;
	uint32_t period;
	uint8_t cmd;

	period = delay_on + delay_off;
	if (period < dev_data->min_period \|\| period > dev_data->max_period) {
	return -EINVAL;
	}

	cmd = HT16K33_CMD_DISP_SETUP \| HT16K33_OPT_D;
	if (delay_off == 0) {
	cmd \|= HT16K33_OPT_BLINK_OFF;
	} else if (period > 1500) {
	cmd \|= HT16K33_OPT_BLINK_05HZ;
	} else if (period > 750) {
	cmd \|= HT16K33_OPT_BLINK_1HZ;
	} else {
	cmd \|= HT16K33_OPT_BLINK_2HZ;
	}

	if (i2c_write(config->i2c_dev, &cmd, sizeof(cmd), config->i2c_addr)) {
	LOG_ERR("Setting HT16K33 blink frequency failed");
	return -EIO;
	}

	return 0;
	}

	static int ht16k33_led_set_brightness(const struct device *dev, uint32_t led,
	uint8_t value)
	{
	ARG_UNUSED(led);

	const struct ht16k33_cfg *config = dev->config;
	struct ht16k33_data *data = dev->data;
	struct led_data *dev_data = &data->dev_data;
	uint8_t dim;
	uint8_t cmd;

	if (value < dev_data->min_brightness \|\|
	value > dev_data->max_brightness) {
	return -EINVAL;
	}

	dim = (value * (HT16K33_DIMMING_LEVELS - 1)) / dev_data->max_brightness;
	cmd = HT16K33_CMD_DIMMING_SET \| dim;

	if (i2c_write(config->i2c_dev, &cmd, sizeof(cmd), config->i2c_addr)) {
	LOG_ERR("Setting HT16K33 brightness failed");
	return -EIO;
	}

	return 0;
	}

	static int ht16k33_led_set_state(const struct device *dev, uint32_t led,
	bool on)
	{
	const struct ht16k33_cfg *config = dev->config;
	struct ht16k33_data *data = dev->data;
	uint8_t cmd[2];
	uint8_t addr;
	uint8_t bit;

	if (led >= HT16K33_DISP_SEGMENTS) {
	return -EINVAL;
	}

	addr = led / HT16K33_DISP_COLS;
	bit = led % HT16K33_DISP_COLS;

	cmd[0] = HT16K33_CMD_DISP_DATA_ADDR \| addr;
	if (on) {
	cmd[1] = data->buffer[addr] \| BIT(bit);
	} else {
	cmd[1] = data->buffer[addr] & ~BIT(bit);
	}

	if (data->buffer[addr] == cmd[1]) {
	return 0;
	}

	if (i2c_write(config->i2c_dev, cmd, sizeof(cmd), config->i2c_addr)) {
	LOG_ERR("Setting HT16K33 LED %s failed", on ? "on" : "off");
	return -EIO;
	}

	data->buffer[addr] = cmd[1];

	return 0;
	}

	static int ht16k33_led_on(const struct device *dev, uint32_t led)
	{
	return ht16k33_led_set_state(dev, led, true);
	}

	static int ht16k33_led_off(const struct device *dev, uint32_t led)
	{
	return ht16k33_led_set_state(dev, led, false);
	}

	#ifdef CONFIG_HT16K33_KEYSCAN
	static bool ht16k33_process_keyscan_data(const struct device *dev)
	{
	const struct ht16k33_cfg *config = dev->config;
	struct ht16k33_data *data = dev->data;
	uint8_t keys[HT16K33_KEYSCAN_DATA_SIZE];
	bool pressed = false;
	uint16_t state;
	uint16_t changed;
	int row;
	int col;
	int err;

	err = i2c_burst_read(config->i2c_dev, config->i2c_addr,
	HT16K33_CMD_KEY_DATA_ADDR, keys,
	sizeof(keys));
	if (err) {
	LOG_WRN("Failed to to read HT16K33 key data (err %d)", err);
	/* Reprocess */
	return true;
	}

	k_mutex_lock(&data->lock, K_FOREVER);

	for (row = 0; row < HT16K33_KEYSCAN_ROWS; row++) {
	state = sys_get_le16(&keys[row * 2]);
	changed = data->key_state[row] ^ state;
	data->key_state[row] = state;

	if (state) {
	pressed = true;
	}

	if (data->kscan_cb == NULL) {
	continue;
	}

	for (col = 0; col < HT16K33_KEYSCAN_COLS; col++) {
	if (changed & BIT(col)) {
	data->kscan_cb(data->child, row, col,
	state & BIT(col));
	}
	}
	}

	k_mutex_unlock(&data->lock);

	return pressed;
	}

	static void ht16k33_irq_thread(struct ht16k33_data *data)
	{
	bool pressed;

	while (true) {
	k_sem_take(&data->irq_sem, K_FOREVER);

	do {
	k_sem_reset(&data->irq_sem);
	pressed = ht16k33_process_keyscan_data(data->dev);
	k_msleep(CONFIG_HT16K33_KEYSCAN_DEBOUNCE_MSEC);
	} while (pressed);
	}
	}

	static void ht16k33_irq_callback(const struct device *gpiob,
	struct gpio_callback *cb, uint32_t pins)
	{
	struct ht16k33_data *data;

	ARG_UNUSED(gpiob);
	ARG_UNUSED(pins);

	data = CONTAINER_OF(cb, struct ht16k33_data, irq_cb);
	k_sem_give(&data->irq_sem);
	}

	static void ht16k33_timer_callback(struct k_timer *timer)
	{
	struct ht16k33_data *data;

	data = CONTAINER_OF(timer, struct ht16k33_data, timer);
	k_sem_give(&data->irq_sem);
	}

	int ht16k33_register_keyscan_callback(const struct device *parent,
	const struct device *child,
	kscan_callback_t callback)
	{
	struct ht16k33_data *data = parent->data;

	k_mutex_lock(&data->lock, K_FOREVER);
	data->child = child;
	data->kscan_cb = callback;
	k_mutex_unlock(&data->lock);

	return 0;
	}
	#endif /* CONFIG_HT16K33_KEYSCAN */

	static int ht16k33_init(const struct device *dev)
	{
	const struct ht16k33_cfg *config = dev->config;
	struct ht16k33_data *data = dev->data;
	struct led_data *dev_data = &data->dev_data;
	uint8_t cmd[1 + HT16K33_DISP_DATA_SIZE]; /* 1 byte command + data */
	int err;

	data->dev = dev;

	if (!device_is_ready(config->i2c_dev)) {
	LOG_ERR("I2C bus device not ready");
	return -EINVAL;
	}

	memset(&data->buffer, 0, sizeof(data->buffer));

	/* Hardware specific limits */
	dev_data->min_period = 0U;
	dev_data->max_period = 2000U;
	dev_data->min_brightness = 0U;
	dev_data->max_brightness = 100U;

	/* System oscillator on */
	cmd[0] = HT16K33_CMD_SYSTEM_SETUP \| HT16K33_OPT_S;
	err = i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr);
	if (err) {
	LOG_ERR("Enabling HT16K33 system oscillator failed (err %d)",
	err);
	return -EIO;
	}

	/* Clear display RAM */
	memset(cmd, 0, sizeof(cmd));
	cmd[0] = HT16K33_CMD_DISP_DATA_ADDR;
	err = i2c_write(config->i2c_dev, cmd, sizeof(cmd), config->i2c_addr);
	if (err) {
	LOG_ERR("Clearing HT16K33 display RAM failed (err %d)", err);
	return -EIO;
	}

	/* Full brightness */
	cmd[0] = HT16K33_CMD_DIMMING_SET \| 0x0f;
	err = i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr);
	if (err) {
	LOG_ERR("Setting HT16K33 brightness failed (err %d)", err);
	return -EIO;
	}

	/* Display on, blinking off */
	cmd[0] = HT16K33_CMD_DISP_SETUP \| HT16K33_OPT_D \| HT16K33_OPT_BLINK_OFF;
	err = i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr);
	if (err) {
	LOG_ERR("Enabling HT16K33 display failed (err %d)", err);
	return -EIO;
	}

	#ifdef CONFIG_HT16K33_KEYSCAN
	k_mutex_init(&data->lock);
	k_sem_init(&data->irq_sem, 0, 1);

	/* Configure interrupt */
	if (config->irq_enabled) {
	uint8_t keys[HT16K33_KEYSCAN_DATA_SIZE];

	if (!device_is_ready(config->irq.port)) {
	LOG_ERR("IRQ device not ready");
	return -EINVAL;
	}

	err = gpio_pin_configure_dt(&config->irq, GPIO_INPUT);
	if (err) {
	LOG_ERR("Failed to configure IRQ pin (err %d)", err);
	return -EINVAL;
	}

	gpio_init_callback(&data->irq_cb, &ht16k33_irq_callback,
	BIT(config->irq.pin));

	err = gpio_add_callback(config->irq.port, &data->irq_cb);
	if (err) {
	LOG_ERR("Failed to add IRQ callback (err %d)", err);
	return -EINVAL;
	}

	/* Enable interrupt pin */
	cmd[0] = HT16K33_CMD_ROW_INT_SET \| HT16K33_OPT_INT_LOW;
	if (i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr)) {
	LOG_ERR("Enabling HT16K33 IRQ output failed");
	return -EIO;
	}

	/* Flush key data before enabling interrupt */
	err = i2c_burst_read(config->i2c_dev, config->i2c_addr,
	HT16K33_CMD_KEY_DATA_ADDR, keys, sizeof(keys));
	if (err) {
	LOG_ERR("Failed to to read HT16K33 key data");
	return -EIO;
	}

	err = gpio_pin_interrupt_configure_dt(&config->irq,
	GPIO_INT_EDGE_FALLING);
	if (err) {
	LOG_ERR("Failed to configure IRQ pin flags (err %d)",
	err);
	return -EINVAL;
	}
	} else {
	/* No interrupt pin, enable ROW15 */
	cmd[0] = HT16K33_CMD_ROW_INT_SET \| HT16K33_OPT_ROW;
	if (i2c_write(config->i2c_dev, cmd, 1, config->i2c_addr)) {
	LOG_ERR("Enabling HT16K33 ROW15 output failed");
	return -EIO;
	}

	/* Setup timer for polling key data */
	k_timer_init(&data->timer, ht16k33_timer_callback, NULL);
	k_timer_start(&data->timer, K_NO_WAIT,
	K_MSEC(CONFIG_HT16K33_KEYSCAN_POLL_MSEC));
	}

	k_thread_create(&data->irq_thread, data->irq_thread_stack,
	CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_STACK_SIZE,
	(k_thread_entry_t)ht16k33_irq_thread, data, NULL, NULL,
	K_PRIO_COOP(CONFIG_HT16K33_KEYSCAN_IRQ_THREAD_PRIO),
	0, K_NO_WAIT);
	#endif /* CONFIG_HT16K33_KEYSCAN */

	return 0;
	}

	static const struct led_driver_api ht16k33_leds_api = {
	.blink = ht16k33_led_blink,
	.set_brightness = ht16k33_led_set_brightness,
	.on = ht16k33_led_on,
	.off = ht16k33_led_off,
	};

	#define HT16K33_DEVICE(id) \
	static const struct ht16k33_cfg ht16k33_##id##_cfg = { \
	.i2c_dev = DEVICE_DT_GET(DT_INST_BUS(id)), \
	.i2c_addr = DT_INST_REG_ADDR(id), \
	.irq_enabled = false, \
	}; \
	\
	static struct ht16k33_data ht16k33_##id##_data; \
	\
	DEVICE_DT_INST_DEFINE(id, &ht16k33_init, NULL, \
	&ht16k33_##id##_data, \
	&ht16k33_##id##_cfg, POST_KERNEL, \
	CONFIG_LED_INIT_PRIORITY, &ht16k33_leds_api)

	#ifdef CONFIG_HT16K33_KEYSCAN
	#define HT16K33_DEVICE_WITH_IRQ(id) \
	static const struct ht16k33_cfg ht16k33_##id##_cfg = { \
	.i2c_dev = DEVICE_DT_GET(DT_INST_BUS(id)), \
	.i2c_addr = DT_INST_REG_ADDR(id), \
	.irq_enabled = true, \
	.irq = GPIO_DT_SPEC_INST_GET(id, irq_gpios), \
	}; \
	\
	static struct ht16k33_data ht16k33_##id##_data; \
	\
	DEVICE_DT_INST_DEFINE(id, &ht16k33_init, NULL, \
	&ht16k33_##id##_data, \
	&ht16k33_##id##_cfg, POST_KERNEL, \
	CONFIG_LED_INIT_PRIORITY, &ht16k33_leds_api)
	#else /* ! CONFIG_HT16K33_KEYSCAN */
	#define HT16K33_DEVICE_WITH_IRQ(id) HT16K33_DEVICE(id)
	#endif /* ! CONFIG_HT16K33_KEYSCAN */

	#define HT16K33_INSTANTIATE(id) \
	COND_CODE_1(DT_INST_NODE_HAS_PROP(id, irq_gpios), \
	(HT16K33_DEVICE_WITH_IRQ(id)), \
	(HT16K33_DEVICE(id)));

	DT_INST_FOREACH_STATUS_OKAY(HT16K33_INSTANTIATE)