blob: 091aaf0e36fea90618ad8a386c6787af034ebd9a [file] [log] [blame]
/*
* Copyright (c) 2021 Nordic Semiconductor ASA
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <device.h>
#include <devicetree.h>
#include <drivers/gpio.h>
#include <bluetooth/bluetooth.h>
#include <bluetooth/conn.h>
#include <bluetooth/iso.h>
#include <sys/byteorder.h>
#define TIMEOUT_SYNC_CREATE K_SECONDS(10)
#define NAME_LEN 30
#define BT_LE_SCAN_CUSTOM BT_LE_SCAN_PARAM(BT_LE_SCAN_TYPE_ACTIVE, \
BT_LE_SCAN_OPT_NONE, \
BT_GAP_SCAN_FAST_INTERVAL, \
BT_GAP_SCAN_FAST_WINDOW)
#define PA_RETRY_COUNT 6
static bool per_adv_found;
static bool per_adv_lost;
static bt_addr_le_t per_addr;
static uint8_t per_sid;
static uint16_t per_interval_ms;
static K_SEM_DEFINE(sem_per_adv, 0, 1);
static K_SEM_DEFINE(sem_per_sync, 0, 1);
static K_SEM_DEFINE(sem_per_sync_lost, 0, 1);
static K_SEM_DEFINE(sem_per_big_info, 0, 1);
static K_SEM_DEFINE(sem_big_sync, 0, 1);
static K_SEM_DEFINE(sem_big_sync_lost, 0, 1);
/* The devicetree node identifier for the "led0" alias. */
#define LED0_NODE DT_ALIAS(led0)
#if DT_NODE_HAS_STATUS(LED0_NODE, okay)
#define HAS_LED 1
#define LED0 DT_GPIO_LABEL(LED0_NODE, gpios)
#define PIN DT_GPIO_PIN(LED0_NODE, gpios)
#define FLAGS DT_GPIO_FLAGS(LED0_NODE, gpios)
#define BLINK_ONOFF K_MSEC(500)
static struct device const *dev;
static struct k_work_delayable blink_work;
static bool led_is_on;
static bool blink;
static void blink_timeout(struct k_work *work)
{
if (!blink) {
return;
}
led_is_on = !led_is_on;
gpio_pin_set(dev, PIN, (int)led_is_on);
k_work_schedule(&blink_work, BLINK_ONOFF);
}
#endif
static bool data_cb(struct bt_data *data, void *user_data)
{
char *name = user_data;
uint8_t len;
switch (data->type) {
case BT_DATA_NAME_SHORTENED:
case BT_DATA_NAME_COMPLETE:
len = MIN(data->data_len, NAME_LEN - 1);
memcpy(name, data->data, len);
name[len] = '\0';
return false;
default:
return true;
}
}
static const char *phy2str(uint8_t phy)
{
switch (phy) {
case 0: return "No packets";
case BT_GAP_LE_PHY_1M: return "LE 1M";
case BT_GAP_LE_PHY_2M: return "LE 2M";
case BT_GAP_LE_PHY_CODED: return "LE Coded";
default: return "Unknown";
}
}
static void scan_recv(const struct bt_le_scan_recv_info *info,
struct net_buf_simple *buf)
{
char le_addr[BT_ADDR_LE_STR_LEN];
char name[NAME_LEN];
(void)memset(name, 0, sizeof(name));
bt_data_parse(buf, data_cb, name);
bt_addr_le_to_str(info->addr, le_addr, sizeof(le_addr));
printk("[DEVICE]: %s, AD evt type %u, Tx Pwr: %i, RSSI %i %s "
"C:%u S:%u D:%u SR:%u E:%u Prim: %s, Secn: %s, "
"Interval: 0x%04x (%u ms), SID: %u\n",
le_addr, info->adv_type, info->tx_power, info->rssi, name,
(info->adv_props & BT_GAP_ADV_PROP_CONNECTABLE) != 0,
(info->adv_props & BT_GAP_ADV_PROP_SCANNABLE) != 0,
(info->adv_props & BT_GAP_ADV_PROP_DIRECTED) != 0,
(info->adv_props & BT_GAP_ADV_PROP_SCAN_RESPONSE) != 0,
(info->adv_props & BT_GAP_ADV_PROP_EXT_ADV) != 0,
phy2str(info->primary_phy), phy2str(info->secondary_phy),
info->interval, BT_CONN_INTERVAL_TO_MS(info->interval), info->sid);
if (!per_adv_found && info->interval) {
per_adv_found = true;
per_sid = info->sid;
per_interval_ms = BT_CONN_INTERVAL_TO_MS(info->interval);
bt_addr_le_copy(&per_addr, info->addr);
k_sem_give(&sem_per_adv);
}
}
static struct bt_le_scan_cb scan_callbacks = {
.recv = scan_recv,
};
static void sync_cb(struct bt_le_per_adv_sync *sync,
struct bt_le_per_adv_sync_synced_info *info)
{
char le_addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(info->addr, le_addr, sizeof(le_addr));
printk("PER_ADV_SYNC[%u]: [DEVICE]: %s synced, "
"Interval 0x%04x (%u ms), PHY %s\n",
bt_le_per_adv_sync_get_index(sync), le_addr,
info->interval, info->interval * 5 / 4, phy2str(info->phy));
k_sem_give(&sem_per_sync);
}
static void term_cb(struct bt_le_per_adv_sync *sync,
const struct bt_le_per_adv_sync_term_info *info)
{
char le_addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(info->addr, le_addr, sizeof(le_addr));
printk("PER_ADV_SYNC[%u]: [DEVICE]: %s sync terminated\n",
bt_le_per_adv_sync_get_index(sync), le_addr);
per_adv_lost = true;
k_sem_give(&sem_per_sync_lost);
}
static void recv_cb(struct bt_le_per_adv_sync *sync,
const struct bt_le_per_adv_sync_recv_info *info,
struct net_buf_simple *buf)
{
char le_addr[BT_ADDR_LE_STR_LEN];
char data_str[129];
bt_addr_le_to_str(info->addr, le_addr, sizeof(le_addr));
bin2hex(buf->data, buf->len, data_str, sizeof(data_str));
printk("PER_ADV_SYNC[%u]: [DEVICE]: %s, tx_power %i, "
"RSSI %i, CTE %u, data length %u, data: %s\n",
bt_le_per_adv_sync_get_index(sync), le_addr, info->tx_power,
info->rssi, info->cte_type, buf->len, data_str);
}
static void biginfo_cb(struct bt_le_per_adv_sync *sync,
const struct bt_iso_biginfo *biginfo)
{
char le_addr[BT_ADDR_LE_STR_LEN];
bt_addr_le_to_str(biginfo->addr, le_addr, sizeof(le_addr));
printk("BIG INFO[%u]: [DEVICE]: %s, sid 0x%02x, "
"num_bis %u, nse %u, interval 0x%04x (%u ms), "
"bn %u, pto %u, irc %u, max_pdu %u, "
"sdu_interval %u us, max_sdu %u, phy %s, "
"%s framing, %sencrypted\n",
bt_le_per_adv_sync_get_index(sync), le_addr, biginfo->sid,
biginfo->num_bis, biginfo->sub_evt_count,
biginfo->iso_interval,
(biginfo->iso_interval * 5 / 4),
biginfo->burst_number, biginfo->offset,
biginfo->rep_count, biginfo->max_pdu, biginfo->sdu_interval,
biginfo->max_sdu, phy2str(biginfo->phy),
biginfo->framing ? "with" : "without",
biginfo->encryption ? "" : "not ");
k_sem_give(&sem_per_big_info);
}
static struct bt_le_per_adv_sync_cb sync_callbacks = {
.synced = sync_cb,
.term = term_cb,
.recv = recv_cb,
.biginfo = biginfo_cb,
};
#define BIS_ISO_CHAN_COUNT 1
static void iso_recv(struct bt_iso_chan *chan, const struct bt_iso_recv_info *info,
struct net_buf *buf)
{
char data_str[128];
size_t str_len;
uint32_t count = 0; /* only valid if the data is a counter */
if (buf->len == sizeof(count)) {
count = sys_get_le32(buf->data);
}
str_len = bin2hex(buf->data, buf->len, data_str, sizeof(data_str));
printk("Incoming data channel %p len %u: %s (counter value %u)\n",
chan, buf->len, data_str, count);
}
static void iso_connected(struct bt_iso_chan *chan)
{
printk("ISO Channel %p connected\n", chan);
k_sem_give(&sem_big_sync);
}
static void iso_disconnected(struct bt_iso_chan *chan, uint8_t reason)
{
printk("ISO Channel %p disconnected with reason 0x%02x\n",
chan, reason);
if (reason != BT_HCI_ERR_OP_CANCELLED_BY_HOST) {
k_sem_give(&sem_big_sync_lost);
}
}
static struct bt_iso_chan_ops iso_ops = {
.recv = iso_recv,
.connected = iso_connected,
.disconnected = iso_disconnected,
};
static struct bt_iso_chan_io_qos iso_rx_qos;
static struct bt_iso_chan_qos bis_iso_qos = {
.rx = &iso_rx_qos,
};
static struct bt_iso_chan bis_iso_chan = {
.ops = &iso_ops,
.qos = &bis_iso_qos,
};
static struct bt_iso_chan *bis[BIS_ISO_CHAN_COUNT] = { &bis_iso_chan };
static struct bt_iso_big_sync_param big_sync_param = {
.bis_channels = bis,
.num_bis = BIS_ISO_CHAN_COUNT,
.bis_bitfield = (BIT_MASK(BIS_ISO_CHAN_COUNT) << 1),
.mse = 1,
.sync_timeout = 100, /* in 10 ms units */
};
void main(void)
{
struct bt_le_per_adv_sync_param sync_create_param;
struct bt_le_per_adv_sync *sync;
struct bt_iso_big *big;
uint32_t sem_timeout;
int err;
printk("Starting Synchronized Receiver Demo\n");
#if defined(HAS_LED)
printk("Get reference to LED device...");
dev = device_get_binding(LED0);
if (!dev) {
printk("Failed.\n");
return;
}
printk("done.\n");
printk("Configure GPIO pin...");
err = gpio_pin_configure(dev, PIN, GPIO_OUTPUT_ACTIVE | FLAGS);
if (err) {
return;
}
printk("done.\n");
k_work_init_delayable(&blink_work, blink_timeout);
#endif /* HAS_LED */
/* Initialize the Bluetooth Subsystem */
err = bt_enable(NULL);
if (err) {
printk("Bluetooth init failed (err %d)\n", err);
return;
}
printk("Scan callbacks register...");
bt_le_scan_cb_register(&scan_callbacks);
printk("success.\n");
printk("Periodic Advertising callbacks register...");
bt_le_per_adv_sync_cb_register(&sync_callbacks);
printk("Success.\n");
do {
per_adv_lost = false;
printk("Start scanning...");
err = bt_le_scan_start(BT_LE_SCAN_CUSTOM, NULL);
if (err) {
printk("failed (err %d)\n", err);
return;
}
printk("success.\n");
#if defined(HAS_LED)
printk("Start blinking LED...\n");
led_is_on = false;
blink = true;
gpio_pin_set(dev, PIN, (int)led_is_on);
k_work_reschedule(&blink_work, BLINK_ONOFF);
#endif /* HAS_LED */
printk("Waiting for periodic advertising...\n");
per_adv_found = false;
err = k_sem_take(&sem_per_adv, K_FOREVER);
if (err) {
printk("failed (err %d)\n", err);
return;
}
printk("Found periodic advertising.\n");
printk("Stop scanning...");
err = bt_le_scan_stop();
if (err) {
printk("failed (err %d)\n", err);
return;
}
printk("success.\n");
printk("Creating Periodic Advertising Sync...");
bt_addr_le_copy(&sync_create_param.addr, &per_addr);
sync_create_param.options = 0;
sync_create_param.sid = per_sid;
sync_create_param.skip = 0;
sync_create_param.timeout = (per_interval_ms * PA_RETRY_COUNT) / 10;
sem_timeout = per_interval_ms * PA_RETRY_COUNT;
err = bt_le_per_adv_sync_create(&sync_create_param, &sync);
if (err) {
printk("failed (err %d)\n", err);
return;
}
printk("success.\n");
printk("Waiting for periodic sync...\n");
err = k_sem_take(&sem_per_sync, K_MSEC(sem_timeout));
if (err) {
printk("failed (err %d)\n", err);
printk("Deleting Periodic Advertising Sync...");
err = bt_le_per_adv_sync_delete(sync);
if (err) {
printk("failed (err %d)\n", err);
return;
}
continue;
}
printk("Periodic sync established.\n");
printk("Waiting for BIG info...\n");
err = k_sem_take(&sem_per_big_info, K_MSEC(sem_timeout));
if (err) {
printk("failed (err %d)\n", err);
if (per_adv_lost) {
continue;
}
printk("Deleting Periodic Advertising Sync...");
err = bt_le_per_adv_sync_delete(sync);
if (err) {
printk("failed (err %d)\n", err);
return;
}
continue;
}
printk("Periodic sync established.\n");
big_sync_create:
printk("Create BIG Sync...\n");
err = bt_iso_big_sync(sync, &big_sync_param, &big);
if (err) {
printk("failed (err %d)\n", err);
return;
}
printk("success.\n");
printk("Waiting for BIG sync...\n");
err = k_sem_take(&sem_big_sync, TIMEOUT_SYNC_CREATE);
if (err) {
printk("failed (err %d)\n", err);
printk("BIG Sync Terminate...");
err = bt_iso_big_terminate(big);
if (err) {
printk("failed (err %d)\n", err);
return;
}
printk("done.\n");
goto per_sync_lost_check;
}
printk("BIG sync established.\n");
#if defined(HAS_LED)
printk("Stop blinking LED.\n");
blink = false;
/* If this fails, we'll exit early in the handler because blink
* is false.
*/
k_work_cancel_delayable(&blink_work);
/* Keep LED on */
led_is_on = true;
gpio_pin_set(dev, PIN, (int)led_is_on);
#endif /* HAS_LED */
printk("Waiting for BIG sync lost...\n");
err = k_sem_take(&sem_big_sync_lost, K_FOREVER);
if (err) {
printk("failed (err %d)\n", err);
return;
}
printk("BIG sync lost.\n");
per_sync_lost_check:
printk("Check for periodic sync lost...\n");
err = k_sem_take(&sem_per_sync_lost, K_NO_WAIT);
if (err) {
/* Periodic Sync active, go back to creating BIG Sync */
goto big_sync_create;
}
printk("Periodic sync lost.\n");
} while (true);
}