blob: fc54fc9a3dd16b80c463f9331c98235a67f9603c [file] [log] [blame]
# Copyright (c) 2018-2019 Linaro
# Copyright (c) 2019 Nordic Semiconductor ASA
#
# SPDX-License-Identifier: Apache-2.0
import os
import pickle
import sys
ZEPHYR_BASE = os.environ["ZEPHYR_BASE"]
sys.path.insert(0, os.path.join(ZEPHYR_BASE, "scripts", "dts",
"python-devicetree", "src"))
from devicetree import edtlib
# Types we support
# 'string', 'int', 'hex', 'bool'
doc_mode = os.environ.get('KCONFIG_DOC_MODE') == "1"
if not doc_mode:
EDT_PICKLE = os.environ.get("EDT_PICKLE")
# The "if" handles a missing dts.
if EDT_PICKLE is not None and os.path.isfile(EDT_PICKLE):
with open(EDT_PICKLE, 'rb') as f:
edt = pickle.load(f)
else:
edt = None
def _warn(kconf, msg):
print("{}:{}: WARNING: {}".format(kconf.filename, kconf.linenr, msg))
def _dt_units_to_scale(unit):
if not unit:
return 0
if unit in {'k', 'K'}:
return 10
if unit in {'m', 'M'}:
return 20
if unit in {'g', 'G'}:
return 30
def dt_chosen_label(kconf, _, chosen):
"""
This function takes a 'chosen' property and treats that property as a path
to an EDT node. If it finds an EDT node, it will look to see if that node
has a "label" property and return the value of that "label", if not we
return an empty string.
"""
if doc_mode or edt is None:
return ""
node = edt.chosen_node(chosen)
if not node:
return ""
if "label" not in node.props:
return ""
return node.props["label"].val
def dt_chosen_enabled(kconf, _, chosen):
"""
This function returns "y" if /chosen contains a property named 'chosen'
that points to an enabled node, and "n" otherwise
"""
if doc_mode or edt is None:
return "n"
node = edt.chosen_node(chosen)
return "y" if node and node.status == "okay" else "n"
def dt_chosen_path(kconf, _, chosen):
"""
This function takes a /chosen node property and returns the path
to the node in the property value, or the empty string.
"""
if doc_mode or edt is None:
return "n"
node = edt.chosen_node(chosen)
return node.path if node else ""
def dt_node_enabled(kconf, name, node):
"""
This function is used to test if a node is enabled (has status
'okay') or not.
The 'node' argument is a string which is either a path or an
alias, or both, depending on 'name'.
If 'name' is 'dt_path_enabled', 'node' is an alias or a path. If
'name' is 'dt_alias_enabled, 'node' is an alias.
"""
if doc_mode or edt is None:
return "n"
if name == "dt_alias_enabled":
if node.startswith("/"):
# EDT.get_node() works with either aliases or paths. If we
# are specifically being asked about an alias, reject paths.
return "n"
else:
# Make sure this is being called appropriately.
assert name == "dt_path_enabled"
try:
node = edt.get_node(node)
except edtlib.EDTError:
return "n"
return "y" if node and node.status == "okay" else "n"
def dt_nodelabel_enabled(kconf, _, label):
"""
This function is like dt_node_enabled(), but the 'label' argument
should be a node label, like "foo" is here:
foo: some-node { ... };
"""
if doc_mode or edt is None:
return "n"
node = edt.label2node.get(label)
return "y" if node and node.status == "okay" else "n"
def _node_reg_addr(node, index, unit):
if not node:
return 0
if not node.regs:
return 0
if int(index) >= len(node.regs):
return 0
if node.regs[int(index)].addr is None:
return 0
return node.regs[int(index)].addr >> _dt_units_to_scale(unit)
def _node_reg_size(node, index, unit):
if not node:
return 0
if not node.regs:
return 0
if int(index) >= len(node.regs):
return 0
if node.regs[int(index)].size is None:
return 0
return node.regs[int(index)].size >> _dt_units_to_scale(unit)
def _node_int_prop(node, prop, unit=None):
"""
This function takes a 'node' and will look to see if that 'node' has a
property called 'prop' and if that 'prop' is an integer type will return
the value of the property 'prop' as either a string int or string hex
value, if not we return 0.
The function will divide the value based on 'unit':
None No division
'k' or 'K' divide by 1024 (1 << 10)
'm' or 'M' divide by 1,048,576 (1 << 20)
'g' or 'G' divide by 1,073,741,824 (1 << 30)
"""
if not node:
return 0
if prop not in node.props:
return 0
if node.props[prop].type != "int":
return 0
return node.props[prop].val >> _dt_units_to_scale(unit)
def _dt_chosen_reg_addr(kconf, chosen, index=0, unit=None):
"""
This function takes a 'chosen' property and treats that property as a path
to an EDT node. If it finds an EDT node, it will look to see if that
node has a register at the given 'index' and return the address value of
that reg, if not we return 0.
The function will divide the value based on 'unit':
None No division
'k' or 'K' divide by 1024 (1 << 10)
'm' or 'M' divide by 1,048,576 (1 << 20)
'g' or 'G' divide by 1,073,741,824 (1 << 30)
"""
if doc_mode or edt is None:
return 0
node = edt.chosen_node(chosen)
return _node_reg_addr(node, index, unit)
def _dt_chosen_reg_size(kconf, chosen, index=0, unit=None):
"""
This function takes a 'chosen' property and treats that property as a path
to an EDT node. If it finds an EDT node, it will look to see if that node
has a register at the given 'index' and return the size value of that reg,
if not we return 0.
The function will divide the value based on 'unit':
None No division
'k' or 'K' divide by 1024 (1 << 10)
'm' or 'M' divide by 1,048,576 (1 << 20)
'g' or 'G' divide by 1,073,741,824 (1 << 30)
"""
if doc_mode or edt is None:
return 0
node = edt.chosen_node(chosen)
return _node_reg_size(node, index, unit)
def dt_chosen_reg(kconf, name, chosen, index=0, unit=None):
"""
This function just routes to the proper function and converts
the result to either a string int or string hex value.
"""
if name == "dt_chosen_reg_size_int":
return str(_dt_chosen_reg_size(kconf, chosen, index, unit))
if name == "dt_chosen_reg_size_hex":
return hex(_dt_chosen_reg_size(kconf, chosen, index, unit))
if name == "dt_chosen_reg_addr_int":
return str(_dt_chosen_reg_addr(kconf, chosen, index, unit))
if name == "dt_chosen_reg_addr_hex":
return hex(_dt_chosen_reg_addr(kconf, chosen, index, unit))
def _dt_node_reg_addr(kconf, path, index=0, unit=None):
"""
This function takes a 'path' and looks for an EDT node at that path. If it
finds an EDT node, it will look to see if that node has a register at the
given 'index' and return the address value of that reg, if not we return 0.
The function will divide the value based on 'unit':
None No division
'k' or 'K' divide by 1024 (1 << 10)
'm' or 'M' divide by 1,048,576 (1 << 20)
'g' or 'G' divide by 1,073,741,824 (1 << 30)
"""
if doc_mode or edt is None:
return 0
try:
node = edt.get_node(path)
except edtlib.EDTError:
return 0
return _node_reg_addr(node, index, unit)
def _dt_node_reg_size(kconf, path, index=0, unit=None):
"""
This function takes a 'path' and looks for an EDT node at that path. If it
finds an EDT node, it will look to see if that node has a register at the
given 'index' and return the size value of that reg, if not we return 0.
The function will divide the value based on 'unit':
None No division
'k' or 'K' divide by 1024 (1 << 10)
'm' or 'M' divide by 1,048,576 (1 << 20)
'g' or 'G' divide by 1,073,741,824 (1 << 30)
"""
if doc_mode or edt is None:
return 0
try:
node = edt.get_node(path)
except edtlib.EDTError:
return 0
return _node_reg_size(node, index, unit)
def dt_node_reg(kconf, name, path, index=0, unit=None):
"""
This function just routes to the proper function and converts
the result to either a string int or string hex value.
"""
if name == "dt_node_reg_size_int":
return str(_dt_node_reg_size(kconf, path, index, unit))
if name == "dt_node_reg_size_hex":
return hex(_dt_node_reg_size(kconf, path, index, unit))
if name == "dt_node_reg_addr_int":
return str(_dt_node_reg_addr(kconf, path, index, unit))
if name == "dt_node_reg_addr_hex":
return hex(_dt_node_reg_addr(kconf, path, index, unit))
def _dt_node_bool_prop_generic(node_search_function, search_arg, prop):
"""
This function takes the 'node_search_function' and uses it to search for
a node with 'search_arg' and if node exists, checks if 'prop' exists
inside the node and is a boolean, if it is true, returns "y".
Otherwise, it returns "n".
"""
try:
node = node_search_function(search_arg)
except edtlib.EDTError:
return "n"
if node is None:
return "n"
if prop not in node.props:
return "n"
if node.props[prop].type != "boolean":
return "n"
if node.props[prop].val:
return "y"
return "n"
def dt_node_bool_prop(kconf, _, path, prop):
"""
This function takes a 'path' and looks for an EDT node at that path. If it
finds an EDT node, it will look to see if that node has a boolean property
by the name of 'prop'. If the 'prop' exists it will return "y" otherwise
we return "n".
"""
if doc_mode or edt is None:
return "n"
return _dt_node_bool_prop_generic(edt.get_node, path, prop)
def dt_nodelabel_bool_prop(kconf, _, label, prop):
"""
This function takes a 'label' and looks for an EDT node with that label.
If it finds an EDT node, it will look to see if that node has a boolean
property by the name of 'prop'. If the 'prop' exists it will return "y"
otherwise we return "n".
"""
if doc_mode or edt is None:
return "n"
return _dt_node_bool_prop_generic(edt.label2node.get, label, prop)
def _dt_node_has_prop_generic(node_search_function, search_arg, prop):
"""
This function takes the 'node_search_function' and uses it to search for
a node with 'search_arg' and if node exists, then checks if 'prop'
exists inside the node and returns "y". Otherwise, it returns "n".
"""
try:
node = node_search_function(search_arg)
except edtlib.EDTError:
return "n"
if node is None:
return "n"
if prop in node.props:
return "y"
return "n"
def dt_node_has_prop(kconf, _, path, prop):
"""
This function takes a 'path' and looks for an EDT node at that path. If it
finds an EDT node, it will look to see if that node has a property
by the name of 'prop'. If the 'prop' exists it will return "y" otherwise
it returns "n".
"""
if doc_mode or edt is None:
return "n"
return _dt_node_has_prop_generic(edt.get_node, path, prop)
def dt_nodelabel_has_prop(kconf, _, label, prop):
"""
This function takes a 'label' and looks for an EDT node with that label.
If it finds an EDT node, it will look to see if that node has a property
by the name of 'prop'. If the 'prop' exists it will return "y" otherwise
it returns "n".
"""
if doc_mode or edt is None:
return "n"
return _dt_node_has_prop_generic(edt.label2node.get, label, prop)
def dt_node_int_prop(kconf, name, path, prop, unit=None):
"""
This function takes a 'path' and property name ('prop') looks for an EDT
node at that path. If it finds an EDT node, it will look to see if that
node has a property called 'prop' and if that 'prop' is an integer type
will return the value of the property 'prop' as either a string int or
string hex value, if not we return 0.
The function will divide the value based on 'unit':
None No division
'k' or 'K' divide by 1024 (1 << 10)
'm' or 'M' divide by 1,048,576 (1 << 20)
'g' or 'G' divide by 1,073,741,824 (1 << 30)
"""
if doc_mode or edt is None:
return "0"
try:
node = edt.get_node(path)
except edtlib.EDTError:
return "0"
if name == "dt_node_int_prop_int":
return str(_node_int_prop(node, prop, unit))
if name == "dt_node_int_prop_hex":
return hex(_node_int_prop(node, prop, unit))
def dt_node_str_prop_equals(kconf, _, path, prop, val):
"""
This function takes a 'path' and property name ('prop') looks for an EDT
node at that path. If it finds an EDT node, it will look to see if that
node has a property 'prop' of type string. If that 'prop' is equal to 'val'
it will return "y" otherwise return "n".
"""
if doc_mode or edt is None:
return "n"
try:
node = edt.get_node(path)
except edtlib.EDTError:
return "n"
if prop not in node.props:
return "n"
if node.props[prop].type != "string":
return "n"
if node.props[prop].val == val:
return "y"
return "n"
def dt_has_compat(kconf, _, compat):
"""
This function takes a 'compat' and returns "y" if any compatible node
can be found in the EDT, otherwise it returns "n".
"""
if doc_mode or edt is None:
return "n"
return "y" if compat in edt.compat2nodes else "n"
def dt_compat_enabled(kconf, _, compat):
"""
This function takes a 'compat' and returns "y" if we find a status "okay"
compatible node in the EDT otherwise we return "n"
"""
if doc_mode or edt is None:
return "n"
return "y" if compat in edt.compat2okay else "n"
def dt_compat_on_bus(kconf, _, compat, bus):
"""
This function takes a 'compat' and returns "y" if we find an "enabled"
compatible node in the EDT which is on bus 'bus'. It returns "n" otherwise.
"""
if doc_mode or edt is None:
return "n"
if compat in edt.compat2okay:
for node in edt.compat2okay[compat]:
if node.on_bus is not None and node.on_bus == bus:
return "y"
return "n"
def dt_nodelabel_has_compat(kconf, _, label, compat):
"""
This function takes a 'label' and looks for an EDT node with that label.
If it finds such node, it returns "y" if this node is compatible with
the provided 'compat'. Otherwise, it return "n" .
"""
if doc_mode or edt is None:
return "n"
node = edt.label2node.get(label)
if node and compat in node.compats:
return "y"
return "n"
def dt_nodelabel_enabled_with_compat(kconf, _, label, compat):
"""
This function takes a 'label' and returns "y" if an "enabled" node with
such label can be found in the EDT and that node is compatible with the
provided 'compat', otherwise it returns "n".
"""
if doc_mode or edt is None:
return "n"
if compat in edt.compat2okay:
for node in edt.compat2okay[compat]:
if label in node.labels:
return "y"
return "n"
def dt_nodelabel_path(kconf, _, label):
"""
This function takes a node label (not a label property) and
returns the path to the node which has that label, or an empty
string if there is no such node.
"""
if doc_mode or edt is None:
return ""
node = edt.label2node.get(label)
return node.path if node else ""
def shields_list_contains(kconf, _, shield):
"""
Return "n" if cmake environment variable 'SHIELD_AS_LIST' doesn't exist.
Return "y" if 'shield' is present list obtained after 'SHIELD_AS_LIST'
has been split using ";" as a separator and "n" otherwise.
"""
try:
list = os.environ['SHIELD_AS_LIST']
except KeyError:
return "n"
return "y" if shield in list.split(";") else "n"
# Keys in this dict are the function names as they appear
# in Kconfig files. The values are tuples in this form:
#
# (python_function, minimum_number_of_args, maximum_number_of_args)
#
# Each python function is given a kconf object and its name in the
# Kconfig file, followed by arguments from the Kconfig file.
#
# See the kconfiglib documentation for more details.
functions = {
"dt_has_compat": (dt_has_compat, 1, 1),
"dt_compat_enabled": (dt_compat_enabled, 1, 1),
"dt_compat_on_bus": (dt_compat_on_bus, 2, 2),
"dt_chosen_label": (dt_chosen_label, 1, 1),
"dt_chosen_enabled": (dt_chosen_enabled, 1, 1),
"dt_chosen_path": (dt_chosen_path, 1, 1),
"dt_path_enabled": (dt_node_enabled, 1, 1),
"dt_alias_enabled": (dt_node_enabled, 1, 1),
"dt_nodelabel_enabled": (dt_nodelabel_enabled, 1, 1),
"dt_nodelabel_enabled_with_compat": (dt_nodelabel_enabled_with_compat, 2, 2),
"dt_chosen_reg_addr_int": (dt_chosen_reg, 1, 3),
"dt_chosen_reg_addr_hex": (dt_chosen_reg, 1, 3),
"dt_chosen_reg_size_int": (dt_chosen_reg, 1, 3),
"dt_chosen_reg_size_hex": (dt_chosen_reg, 1, 3),
"dt_node_reg_addr_int": (dt_node_reg, 1, 3),
"dt_node_reg_addr_hex": (dt_node_reg, 1, 3),
"dt_node_reg_size_int": (dt_node_reg, 1, 3),
"dt_node_reg_size_hex": (dt_node_reg, 1, 3),
"dt_node_bool_prop": (dt_node_bool_prop, 2, 2),
"dt_nodelabel_bool_prop": (dt_nodelabel_bool_prop, 2, 2),
"dt_node_has_prop": (dt_node_has_prop, 2, 2),
"dt_nodelabel_has_prop": (dt_nodelabel_has_prop, 2, 2),
"dt_node_int_prop_int": (dt_node_int_prop, 2, 3),
"dt_node_int_prop_hex": (dt_node_int_prop, 2, 3),
"dt_node_str_prop_equals": (dt_node_str_prop_equals, 3, 3),
"dt_nodelabel_has_compat": (dt_nodelabel_has_compat, 2, 2),
"dt_nodelabel_path": (dt_nodelabel_path, 1, 1),
"shields_list_contains": (shields_list_contains, 1, 1),
}