blob: 1eae4875c13dac60ac756a367f98ddee60834379 [file] [log] [blame]
/*
* Copyright (c) 2021 Espressif Systems (Shanghai) Co., Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*/
/* Include esp-idf headers first to avoid redefining BIT() macro */
#include <soc/rtc_cntl_reg.h>
#include <soc/timer_group_reg.h>
#include <soc/gpio_reg.h>
#include <soc/syscon_reg.h>
#include <soc/system_reg.h>
#include <soc/cache_memory.h>
#include "hal/soc_ll.h"
#include "esp_spi_flash.h"
#include <soc/interrupt_reg.h>
#include <drivers/interrupt_controller/intc_esp32c3.h>
#include <kernel_structs.h>
#include <kernel_internal.h>
#include <string.h>
#include <toolchain/gcc.h>
#include <soc.h>
/*
* This is written in C rather than assembly since, during the port bring up,
* Zephyr is being booted by the Espressif bootloader. With it, the C stack
* is already set up.
*/
void __attribute__((section(".iram1"))) __esp_platform_start(void)
{
volatile uint32_t *wdt_rtc_protect = (uint32_t *)RTC_CNTL_WDTWPROTECT_REG;
volatile uint32_t *wdt_rtc_reg = (uint32_t *)RTC_CNTL_WDTCONFIG0_REG;
#ifdef CONFIG_RISCV_GP
/* Configure the global pointer register
* (This should be the first thing startup does, as any other piece of code could be
* relaxed by the linker to access something relative to __global_pointer$)
*/
__asm__ __volatile__(".option push\n"
".option norelax\n"
"la gp, __global_pointer$\n"
".option pop");
#endif /* CONFIG_RISCV_GP */
__asm__ __volatile__("la t0, _esp32c3_vector_table\n"
"csrw mtvec, t0\n");
z_bss_zero();
/* Disable normal interrupts. */
csr_read_clear(mstatus, MSTATUS_MIE);
/* ESP-IDF 2nd stage bootloader enables RTC WDT to check on startup sequence
* related issues in application. Hence disable that as we are about to start
* Zephyr environment.
*/
*wdt_rtc_protect = RTC_CNTL_WDT_WKEY_VALUE;
*wdt_rtc_reg &= ~RTC_CNTL_WDT_EN;
*wdt_rtc_protect = 0;
/* Configure the Cache MMU size for instruction and rodata in flash. */
extern uint32_t esp_rom_cache_set_idrom_mmu_size(uint32_t irom_size,
uint32_t drom_size);
extern int _rodata_reserved_start;
uint32_t rodata_reserved_start_align =
(uint32_t)&_rodata_reserved_start & ~(MMU_PAGE_SIZE - 1);
uint32_t cache_mmu_irom_size =
((rodata_reserved_start_align - SOC_DROM_LOW) / MMU_PAGE_SIZE) *
sizeof(uint32_t);
esp_rom_cache_set_idrom_mmu_size(cache_mmu_irom_size,
CACHE_DROM_MMU_MAX_END - cache_mmu_irom_size);
/* Enable wireless phy subsystem clock,
* This needs to be done before the kernel starts
*/
REG_CLR_BIT(SYSTEM_WIFI_CLK_EN_REG, SYSTEM_WIFI_CLK_SDIOSLAVE_EN);
SET_PERI_REG_MASK(SYSTEM_WIFI_CLK_EN_REG, SYSTEM_WIFI_CLK_EN);
#if CONFIG_SOC_FLASH_ESP32
spi_flash_guard_set(&g_flash_guard_default_ops);
#endif
/*Initialize the esp32c3 interrupt controller */
esp_intr_initialize();
/* Start Zephyr */
z_cstart();
CODE_UNREACHABLE;
}
/* Boot-time static default printk handler, possibly to be overridden later. */
int IRAM_ATTR arch_printk_char_out(int c)
{
if (c == '\n') {
esp_rom_uart_tx_one_char('\r');
}
esp_rom_uart_tx_one_char(c);
return 0;
}
void IRAM_ATTR esp_restart_noos(void)
{
/* Disable interrupts */
csr_read_clear(mstatus, MSTATUS_MIE);
/* Flush any data left in UART FIFOs */
esp_rom_uart_tx_wait_idle(0);
esp_rom_uart_tx_wait_idle(1);
esp_rom_uart_tx_wait_idle(2);
/* 2nd stage bootloader reconfigures SPI flash signals. */
/* Reset them to the defaults expected by ROM */
WRITE_PERI_REG(GPIO_FUNC0_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC1_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC2_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC3_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC4_IN_SEL_CFG_REG, 0x30);
WRITE_PERI_REG(GPIO_FUNC5_IN_SEL_CFG_REG, 0x30);
/* Reset wifi/bluetooth/ethernet/sdio (bb/mac) */
SET_PERI_REG_MASK(SYSTEM_CORE_RST_EN_REG,
SYSTEM_BB_RST | SYSTEM_FE_RST | SYSTEM_MAC_RST | SYSTEM_BT_RST |
SYSTEM_BTMAC_RST | SYSTEM_SDIO_RST | SYSTEM_EMAC_RST |
SYSTEM_MACPWR_RST | SYSTEM_RW_BTMAC_RST | SYSTEM_RW_BTLP_RST |
BLE_REG_REST_BIT | BLE_PWR_REG_REST_BIT | BLE_BB_REG_REST_BIT);
REG_WRITE(SYSTEM_CORE_RST_EN_REG, 0);
/* Reset timer/spi/uart */
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN0_REG,
SYSTEM_TIMERS_RST | SYSTEM_SPI01_RST | SYSTEM_UART_RST);
REG_WRITE(SYSTEM_PERIP_RST_EN0_REG, 0);
/* Reset dma */
SET_PERI_REG_MASK(SYSTEM_PERIP_RST_EN1_REG, SYSTEM_DMA_RST);
REG_WRITE(SYSTEM_PERIP_RST_EN1_REG, 0);
/* Reset core */
soc_ll_reset_core(0);
while (true) {
;
}
}
void sys_arch_reboot(int type)
{
esp_restart_noos();
}