| /** |
| * Copyright (c) 2015 - 2018, Nordic Semiconductor ASA |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * |
| * 1. Redistributions of source code must retain the above copyright notice, this |
| * list of conditions and the following disclaimer. |
| * |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * |
| * 3. Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #ifndef NRFX_COMP_H__ |
| #define NRFX_COMP_H__ |
| |
| #include <nrfx.h> |
| #include <hal/nrf_comp.h> |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /** |
| * @defgroup nrfx_comp COMP driver |
| * @{ |
| * @ingroup nrf_comp |
| * @brief Comparator (COMP) peripheral driver. |
| */ |
| |
| /** |
| * @brief Macro to convert the threshold voltage to an integer value |
| * (needed by the COMP_TH register). |
| * |
| * @param[in] vol Voltage to be changed to COMP_TH register value. This value |
| * must not be smaller than reference voltage divided by 64. |
| * @param[in] ref Reference voltage. |
| */ |
| #define NRFX_VOLTAGE_THRESHOLD_TO_INT(vol, ref) \ |
| (uint8_t)(((vol) > ((ref) / 64)) ? (NRFX_ROUNDED_DIV((vol) * 64,(ref)) - 1) : 0) |
| |
| /** |
| * @brief COMP event handler function type. |
| * @param[in] event COMP event. |
| */ |
| typedef void (* nrfx_comp_event_handler_t)(nrf_comp_event_t event); |
| |
| /** @brief COMP shortcut masks. */ |
| typedef enum |
| { |
| NRFX_COMP_SHORT_STOP_AFTER_CROSS_EVT = COMP_SHORTS_CROSS_STOP_Msk, /*!< Shortcut between the CROSS event and the STOP task. */ |
| NRFX_COMP_SHORT_STOP_AFTER_UP_EVT = COMP_SHORTS_UP_STOP_Msk, /*!< Shortcut between the UP event and the STOP task. */ |
| NRFX_COMP_SHORT_STOP_AFTER_DOWN_EVT = COMP_SHORTS_DOWN_STOP_Msk /*!< Shortcut between the DOWN event and the STOP task. */ |
| } nrfx_comp_short_mask_t; |
| |
| /** @brief COMP events masks. */ |
| typedef enum |
| { |
| NRFX_COMP_EVT_EN_CROSS_MASK = COMP_INTENSET_CROSS_Msk, /*!< CROSS event (generated after VIN+ == VIN-). */ |
| NRFX_COMP_EVT_EN_UP_MASK = COMP_INTENSET_UP_Msk, /*!< UP event (generated when VIN+ crosses VIN- while increasing). */ |
| NRFX_COMP_EVT_EN_DOWN_MASK = COMP_INTENSET_DOWN_Msk, /*!< DOWN event (generated when VIN+ crosses VIN- while decreasing). */ |
| NRFX_COMP_EVT_EN_READY_MASK = COMP_INTENSET_READY_Msk /*!< READY event (generated when the module is ready). */ |
| } nrfx_comp_evt_en_mask_t; |
| |
| /** @brief COMP configuration. */ |
| typedef struct |
| { |
| nrf_comp_ref_t reference; /**< Reference selection. */ |
| nrf_comp_ext_ref_t ext_ref; /**< External analog reference selection. */ |
| nrf_comp_main_mode_t main_mode; /**< Main operation mode. */ |
| nrf_comp_th_t threshold; /**< Structure holding THDOWN and THUP values needed by the COMP_TH register. */ |
| nrf_comp_sp_mode_t speed_mode; /**< Speed and power mode. */ |
| nrf_comp_hyst_t hyst; /**< Comparator hysteresis.*/ |
| #if defined (COMP_ISOURCE_ISOURCE_Msk) || defined (__NRFX_DOXYGEN__) |
| nrf_isource_t isource; /**< Current source selected on analog input. */ |
| #endif |
| nrf_comp_input_t input; /**< Input to be monitored. */ |
| uint8_t interrupt_priority; /**< Interrupt priority. */ |
| } nrfx_comp_config_t; |
| |
| /** @brief COMP threshold default configuration. */ |
| #define NRFX_COMP_CONFIG_TH \ |
| { \ |
| .th_down = NRFX_VOLTAGE_THRESHOLD_TO_INT(0.5, 1.8), \ |
| .th_up = NRFX_VOLTAGE_THRESHOLD_TO_INT(1.5, 1.8) \ |
| } |
| |
| /** @brief COMP driver default configuration including the COMP HAL configuration. */ |
| #if defined (COMP_ISOURCE_ISOURCE_Msk) || defined (__NRFX_DOXYGEN__) |
| #define NRFX_COMP_DEFAULT_CONFIG(_input) \ |
| { \ |
| .reference = (nrf_comp_ref_t)NRFX_COMP_CONFIG_REF, \ |
| .main_mode = (nrf_comp_main_mode_t)NRFX_COMP_CONFIG_MAIN_MODE, \ |
| .threshold = NRFX_COMP_CONFIG_TH, \ |
| .speed_mode = (nrf_comp_sp_mode_t)NRFX_COMP_CONFIG_SPEED_MODE, \ |
| .hyst = (nrf_comp_hyst_t)NRFX_COMP_CONFIG_HYST, \ |
| .isource = (nrf_isource_t)NRFX_COMP_CONFIG_ISOURCE, \ |
| .input = (nrf_comp_input_t)_input, \ |
| .interrupt_priority = NRFX_COMP_CONFIG_IRQ_PRIORITY \ |
| } |
| #else |
| #define NRFX_COMP_DEFAULT_CONFIG(_input) \ |
| { \ |
| .reference = (nrf_comp_ref_t)NRFX_COMP_CONFIG_REF, \ |
| .main_mode = (nrf_comp_main_mode_t)NRFX_COMP_CONFIG_MAIN_MODE, \ |
| .threshold = NRFX_COMP_CONFIG_TH, \ |
| .speed_mode = (nrf_comp_sp_mode_t)NRFX_COMP_CONFIG_SPEED_MODE, \ |
| .hyst = (nrf_comp_hyst_t)NRFX_COMP_CONFIG_HYST, \ |
| .input = (nrf_comp_input_t)_input, \ |
| .interrupt_priority = NRFX_COMP_CONFIG_IRQ_PRIORITY \ |
| } |
| #endif |
| |
| /** |
| * @brief Function for initializing the COMP driver. |
| * |
| * This function initializes the COMP driver, but does not enable the peripheral or any interrupts. |
| * To start the driver, call the function @ref nrfx_comp_start() after initialization. |
| * |
| * @param[in] p_config Pointer to the structure with initial configuration. |
| * @param[in] event_handler Event handler provided by the user. |
| * Must not be NULL. |
| * |
| * @retval NRFX_SUCCESS If initialization was successful. |
| * @retval NRFX_ERROR_INVALID_STATE If the driver has already been initialized. |
| * @retval NRFX_ERROR_BUSY If the LPCOMP peripheral is already in use. |
| * This is possible only if @ref nrfx_prs module |
| * is enabled. |
| */ |
| nrfx_err_t nrfx_comp_init(nrfx_comp_config_t const * p_config, |
| nrfx_comp_event_handler_t event_handler); |
| |
| |
| /** |
| * @brief Function for uninitializing the COMP driver. |
| * |
| * This function uninitializes the COMP driver. The COMP peripheral and |
| * its interrupts are disabled, and local variables are cleaned. After this call, you must |
| * initialize the driver again by calling nrfx_comp_init() if you want to use it. |
| * |
| * @sa nrfx_comp_stop() |
| */ |
| void nrfx_comp_uninit(void); |
| |
| /** |
| * @brief Function for setting the analog input. |
| * |
| * @param[in] psel COMP analog pin selection. |
| */ |
| void nrfx_comp_pin_select(nrf_comp_input_t psel); |
| |
| /** |
| * @brief Function for starting the COMP peripheral and interrupts. |
| * |
| * Before calling this function, the driver must be initialized. This function |
| * enables the COMP peripheral and its interrupts. |
| * |
| * @param[in] comp_evt_en_mask Mask of events to be enabled. This parameter should be built as |
| * 'or' of elements from @ref nrfx_comp_evt_en_mask_t. |
| * @param[in] comp_shorts_mask Mask of shorts to be enabled. This parameter should be built as |
| * 'or' of elements from @ref nrfx_comp_short_mask_t. |
| * |
| * @sa nrfx_comp_init() |
| * |
| */ |
| void nrfx_comp_start(uint32_t comp_evt_en_mask, uint32_t comp_shorts_mask); |
| |
| /**@brief Function for stopping the COMP peripheral. |
| * |
| * Before calling this function, the driver must be enabled. This function disables the COMP |
| * peripheral and its interrupts. |
| * |
| * @sa nrfx_comp_uninit() |
| * |
| */ |
| void nrfx_comp_stop(void); |
| |
| /** |
| * @brief Function for copying the current state of the comparator result to the RESULT register. |
| * |
| * @retval 0 If the input voltage is below the threshold (VIN+ < VIN-). |
| * @retval 1 If the input voltage is above the threshold (VIN+ > VIN-). |
| */ |
| uint32_t nrfx_comp_sample(void); |
| |
| /** |
| * @brief Function for getting the address of a COMP task. |
| * |
| * @param[in] task COMP task. |
| * |
| * @return Address of the given COMP task. |
| */ |
| __STATIC_INLINE uint32_t nrfx_comp_task_address_get(nrf_comp_task_t task) |
| { |
| return (uint32_t)nrf_comp_task_address_get(task); |
| } |
| |
| /** |
| * @brief Function for getting the address of a COMP event. |
| * |
| * @param[in] event COMP event. |
| * |
| * @return Address of the given COMP event. |
| */ |
| __STATIC_INLINE uint32_t nrfx_comp_event_address_get(nrf_comp_event_t event) |
| { |
| return (uint32_t)nrf_comp_event_address_get(event); |
| } |
| |
| |
| void nrfx_comp_irq_handler(void); |
| |
| |
| /** @} **/ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif // NRFX_COMP_H__ |