/** | |
****************************************************************************** | |
* @file stm32f7xx_hal_dac_ex.c | |
* @author MCD Application Team | |
* @version V1.1.1 | |
* @date 01-July-2016 | |
* @brief Extended DAC HAL module driver. | |
* This file provides firmware functions to manage the following | |
* functionalities of DAC extension peripheral: | |
* + Extended features functions | |
* | |
* | |
@verbatim | |
============================================================================== | |
##### How to use this driver ##### | |
============================================================================== | |
[..] | |
(+) When Dual mode is enabled (i.e DAC Channel1 and Channel2 are used simultaneously) : | |
Use HAL_DACEx_DualGetValue() to get digital data to be converted and use | |
HAL_DACEx_DualSetValue() to set digital value to converted simultaneously in Channel 1 and Channel 2. | |
(+) Use HAL_DACEx_TriangleWaveGenerate() to generate Triangle signal. | |
(+) Use HAL_DACEx_NoiseWaveGenerate() to generate Noise signal. | |
@endverbatim | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f7xx_hal.h" | |
/** @addtogroup STM32F7xx_HAL_Driver | |
* @{ | |
*/ | |
/** @defgroup DACEx DACEx | |
* @brief DAC driver modules | |
* @{ | |
*/ | |
#ifdef HAL_DAC_MODULE_ENABLED | |
/* Private typedef -----------------------------------------------------------*/ | |
/* Private define ------------------------------------------------------------*/ | |
/* Private macro -------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/* Private function prototypes -----------------------------------------------*/ | |
/* Private functions ---------------------------------------------------------*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup DACEx_Exported_Functions DAC Exported Functions | |
* @{ | |
*/ | |
/** @defgroup DACEx_Exported_Functions_Group1 Extended features functions | |
* @brief Extended features functions | |
* | |
@verbatim | |
============================================================================== | |
##### Extended features functions ##### | |
============================================================================== | |
[..] This section provides functions allowing to: | |
(+) Start conversion. | |
(+) Stop conversion. | |
(+) Start conversion and enable DMA transfer. | |
(+) Stop conversion and disable DMA transfer. | |
(+) Get result of conversion. | |
(+) Get result of dual mode conversion. | |
@endverbatim | |
* @{ | |
*/ | |
/** | |
* @brief Returns the last data output value of the selected DAC channel. | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @retval The selected DAC channel data output value. | |
*/ | |
uint32_t HAL_DACEx_DualGetValue(DAC_HandleTypeDef* hdac) | |
{ | |
uint32_t tmp = 0; | |
tmp |= hdac->Instance->DOR1; | |
tmp |= hdac->Instance->DOR2 << 16; | |
/* Returns the DAC channel data output register value */ | |
return tmp; | |
} | |
/** | |
* @brief Enables or disables the selected DAC channel wave generation. | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @param Channel: The selected DAC channel. | |
* This parameter can be one of the following values: | |
* @arg DAC_CHANNEL_1: DAC Channel1 selected | |
* @arg DAC_CHANNEL_2: DAC Channel2 selected | |
* @param Amplitude: Select max triangle amplitude. | |
* This parameter can be one of the following values: | |
* @arg DAC_TRIANGLEAMPLITUDE_1: Select max triangle amplitude of 1 | |
* @arg DAC_TRIANGLEAMPLITUDE_3: Select max triangle amplitude of 3 | |
* @arg DAC_TRIANGLEAMPLITUDE_7: Select max triangle amplitude of 7 | |
* @arg DAC_TRIANGLEAMPLITUDE_15: Select max triangle amplitude of 15 | |
* @arg DAC_TRIANGLEAMPLITUDE_31: Select max triangle amplitude of 31 | |
* @arg DAC_TRIANGLEAMPLITUDE_63: Select max triangle amplitude of 63 | |
* @arg DAC_TRIANGLEAMPLITUDE_127: Select max triangle amplitude of 127 | |
* @arg DAC_TRIANGLEAMPLITUDE_255: Select max triangle amplitude of 255 | |
* @arg DAC_TRIANGLEAMPLITUDE_511: Select max triangle amplitude of 511 | |
* @arg DAC_TRIANGLEAMPLITUDE_1023: Select max triangle amplitude of 1023 | |
* @arg DAC_TRIANGLEAMPLITUDE_2047: Select max triangle amplitude of 2047 | |
* @arg DAC_TRIANGLEAMPLITUDE_4095: Select max triangle amplitude of 4095 | |
* @retval HAL status | |
*/ | |
HAL_StatusTypeDef HAL_DACEx_TriangleWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude) | |
{ | |
/* Check the parameters */ | |
assert_param(IS_DAC_CHANNEL(Channel)); | |
assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); | |
/* Process locked */ | |
__HAL_LOCK(hdac); | |
/* Change DAC state */ | |
hdac->State = HAL_DAC_STATE_BUSY; | |
/* Enable the selected wave generation for the selected DAC channel */ | |
MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_1 | Amplitude) << Channel); | |
/* Change DAC state */ | |
hdac->State = HAL_DAC_STATE_READY; | |
/* Process unlocked */ | |
__HAL_UNLOCK(hdac); | |
/* Return function status */ | |
return HAL_OK; | |
} | |
/** | |
* @brief Enables or disables the selected DAC channel wave generation. | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @param Channel: The selected DAC channel. | |
* This parameter can be one of the following values: | |
* @arg DAC_CHANNEL_1: DAC Channel1 selected | |
* @arg DAC_CHANNEL_2: DAC Channel2 selected | |
* @param Amplitude: Unmask DAC channel LFSR for noise wave generation. | |
* This parameter can be one of the following values: | |
* @arg DAC_LFSRUNMASK_BIT0: Unmask DAC channel LFSR bit0 for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS1_0: Unmask DAC channel LFSR bit[1:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS2_0: Unmask DAC channel LFSR bit[2:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS3_0: Unmask DAC channel LFSR bit[3:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS4_0: Unmask DAC channel LFSR bit[4:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS5_0: Unmask DAC channel LFSR bit[5:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS6_0: Unmask DAC channel LFSR bit[6:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS7_0: Unmask DAC channel LFSR bit[7:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS8_0: Unmask DAC channel LFSR bit[8:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS9_0: Unmask DAC channel LFSR bit[9:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS10_0: Unmask DAC channel LFSR bit[10:0] for noise wave generation | |
* @arg DAC_LFSRUNMASK_BITS11_0: Unmask DAC channel LFSR bit[11:0] for noise wave generation | |
* @retval HAL status | |
*/ | |
HAL_StatusTypeDef HAL_DACEx_NoiseWaveGenerate(DAC_HandleTypeDef* hdac, uint32_t Channel, uint32_t Amplitude) | |
{ | |
/* Check the parameters */ | |
assert_param(IS_DAC_CHANNEL(Channel)); | |
assert_param(IS_DAC_LFSR_UNMASK_TRIANGLE_AMPLITUDE(Amplitude)); | |
/* Process locked */ | |
__HAL_LOCK(hdac); | |
/* Change DAC state */ | |
hdac->State = HAL_DAC_STATE_BUSY; | |
/* Enable the selected wave generation for the selected DAC channel */ | |
MODIFY_REG(hdac->Instance->CR, (DAC_CR_WAVE1 | DAC_CR_MAMP1) << Channel, (DAC_CR_WAVE1_0 | Amplitude) << Channel); | |
/* Change DAC state */ | |
hdac->State = HAL_DAC_STATE_READY; | |
/* Process unlocked */ | |
__HAL_UNLOCK(hdac); | |
/* Return function status */ | |
return HAL_OK; | |
} | |
/** | |
* @brief Set the specified data holding register value for dual DAC channel. | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @param Alignment: Specifies the data alignment for dual channel DAC. | |
* This parameter can be one of the following values: | |
* DAC_ALIGN_8B_R: 8bit right data alignment selected | |
* DAC_ALIGN_12B_L: 12bit left data alignment selected | |
* DAC_ALIGN_12B_R: 12bit right data alignment selected | |
* @param Data1: Data for DAC Channel2 to be loaded in the selected data holding register. | |
* @param Data2: Data for DAC Channel1 to be loaded in the selected data holding register. | |
* @note In dual mode, a unique register access is required to write in both | |
* DAC channels at the same time. | |
* @retval HAL status | |
*/ | |
HAL_StatusTypeDef HAL_DACEx_DualSetValue(DAC_HandleTypeDef* hdac, uint32_t Alignment, uint32_t Data1, uint32_t Data2) | |
{ | |
uint32_t data = 0, tmp = 0; | |
/* Check the parameters */ | |
assert_param(IS_DAC_ALIGN(Alignment)); | |
assert_param(IS_DAC_DATA(Data1)); | |
assert_param(IS_DAC_DATA(Data2)); | |
/* Calculate and set dual DAC data holding register value */ | |
if (Alignment == DAC_ALIGN_8B_R) | |
{ | |
data = ((uint32_t)Data2 << 8) | Data1; | |
} | |
else | |
{ | |
data = ((uint32_t)Data2 << 16) | Data1; | |
} | |
tmp = (uint32_t)hdac->Instance; | |
tmp += DAC_DHR12RD_ALIGNMENT(Alignment); | |
/* Set the dual DAC selected data holding register */ | |
*(__IO uint32_t *)tmp = data; | |
/* Return function status */ | |
return HAL_OK; | |
} | |
/** | |
* @} | |
*/ | |
/** | |
* @brief Conversion complete callback in non blocking mode for Channel2 | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @retval None | |
*/ | |
__weak void HAL_DACEx_ConvCpltCallbackCh2(DAC_HandleTypeDef* hdac) | |
{ | |
/* Prevent unused argument(s) compilation warning */ | |
UNUSED(hdac); | |
/* NOTE : This function Should not be modified, when the callback is needed, | |
the HAL_DAC_ConvCpltCallbackCh2 could be implemented in the user file | |
*/ | |
} | |
/** | |
* @brief Conversion half DMA transfer callback in non blocking mode for Channel2 | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @retval None | |
*/ | |
__weak void HAL_DACEx_ConvHalfCpltCallbackCh2(DAC_HandleTypeDef* hdac) | |
{ | |
/* Prevent unused argument(s) compilation warning */ | |
UNUSED(hdac); | |
/* NOTE : This function Should not be modified, when the callback is needed, | |
the HAL_DACEx_ConvHalfCpltCallbackCh2 could be implemented in the user file | |
*/ | |
} | |
/** | |
* @brief Error DAC callback for Channel2. | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @retval None | |
*/ | |
__weak void HAL_DACEx_ErrorCallbackCh2(DAC_HandleTypeDef *hdac) | |
{ | |
/* Prevent unused argument(s) compilation warning */ | |
UNUSED(hdac); | |
/* NOTE : This function Should not be modified, when the callback is needed, | |
the HAL_DACEx_ErrorCallbackCh2 could be implemented in the user file | |
*/ | |
} | |
/** | |
* @brief DMA underrun DAC callback for channel2. | |
* @param hdac: pointer to a DAC_HandleTypeDef structure that contains | |
* the configuration information for the specified DAC. | |
* @retval None | |
*/ | |
__weak void HAL_DACEx_DMAUnderrunCallbackCh2(DAC_HandleTypeDef *hdac) | |
{ | |
/* Prevent unused argument(s) compilation warning */ | |
UNUSED(hdac); | |
/* NOTE : This function Should not be modified, when the callback is needed, | |
the HAL_DACEx_DMAUnderrunCallbackCh2 could be implemented in the user file | |
*/ | |
} | |
/** | |
* @brief DMA conversion complete callback. | |
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains | |
* the configuration information for the specified DMA module. | |
* @retval None | |
*/ | |
void DAC_DMAConvCpltCh2(DMA_HandleTypeDef *hdma) | |
{ | |
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; | |
HAL_DACEx_ConvCpltCallbackCh2(hdac); | |
hdac->State= HAL_DAC_STATE_READY; | |
} | |
/** | |
* @brief DMA half transfer complete callback. | |
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains | |
* the configuration information for the specified DMA module. | |
* @retval None | |
*/ | |
void DAC_DMAHalfConvCpltCh2(DMA_HandleTypeDef *hdma) | |
{ | |
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; | |
/* Conversion complete callback */ | |
HAL_DACEx_ConvHalfCpltCallbackCh2(hdac); | |
} | |
/** | |
* @brief DMA error callback | |
* @param hdma: pointer to a DMA_HandleTypeDef structure that contains | |
* the configuration information for the specified DMA module. | |
* @retval None | |
*/ | |
void DAC_DMAErrorCh2(DMA_HandleTypeDef *hdma) | |
{ | |
DAC_HandleTypeDef* hdac = ( DAC_HandleTypeDef* )((DMA_HandleTypeDef* )hdma)->Parent; | |
/* Set DAC error code to DMA error */ | |
hdac->ErrorCode |= HAL_DAC_ERROR_DMA; | |
HAL_DACEx_ErrorCallbackCh2(hdac); | |
hdac->State= HAL_DAC_STATE_READY; | |
} | |
/** | |
* @} | |
*/ | |
#endif /* HAL_DAC_MODULE_ENABLED */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |