/** | |
****************************************************************************** | |
* @file stm32f7xx_hal_timebase_rtc_wakeup_template.c | |
* @author MCD Application Team | |
* @version V1.1.1 | |
* @date 01-July-2016 | |
* @brief HAL time base based on the hardware RTC_WAKEUP Template. | |
* | |
* This file overrides the native HAL time base functions (defined as weak) | |
* to use the RTC WAKEUP for the time base generation: | |
* + Intializes the RTC peripheral and configures the wakeup timer to be | |
* incremented each 1ms | |
* + The wakeup feature is configured to assert an interrupt each 1ms | |
* + HAL_IncTick is called inside the HAL_RTCEx_WakeUpTimerEventCallback | |
* + HSE (default), LSE or LSI can be selected as RTC clock source | |
@verbatim | |
============================================================================== | |
##### How to use this driver ##### | |
============================================================================== | |
[..] | |
This file must be copied to the application folder and modified as follows: | |
(#) Rename it to 'stm32f7xx_hal_timebase_rtc_wakeup.c' | |
(#) Add this file and the RTC HAL drivers to your project and uncomment | |
HAL_RTC_MODULE_ENABLED define in stm32f7xx_hal_conf.h | |
[..] | |
(@) HAL RTC alarm and HAL RTC wakeup drivers cant be used with low power modes: | |
The wake up capability of the RTC may be intrusive in case of prior low power mode | |
configuration requiring different wake up sources. | |
Application/Example behavior is no more guaranteed | |
(@) The stm32f7xx_hal_timebase_tim use is recommended for the Applications/Examples | |
requiring low power modes | |
@endverbatim | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f7xx_hal.h" | |
/** @addtogroup STM32F7xx_HAL_Driver | |
* @{ | |
*/ | |
/** @defgroup HAL_TimeBase_RTC_WakeUp_Template HAL TimeBase RTC WakeUp Template | |
* @{ | |
*/ | |
/* Private typedef -----------------------------------------------------------*/ | |
/* Private define ------------------------------------------------------------*/ | |
/* Uncomment the line below to select the appropriate RTC Clock source for your application: | |
+ RTC_CLOCK_SOURCE_HSE: can be selected for applications requiring timing precision. | |
+ RTC_CLOCK_SOURCE_LSE: can be selected for applications with low constraint on timing | |
precision. | |
+ RTC_CLOCK_SOURCE_LSI: can be selected for applications with low constraint on timing | |
precision. | |
*/ | |
#define RTC_CLOCK_SOURCE_HSE | |
/* #define RTC_CLOCK_SOURCE_LSE */ | |
/* #define RTC_CLOCK_SOURCE_LSI */ | |
#ifdef RTC_CLOCK_SOURCE_HSE | |
#define RTC_ASYNCH_PREDIV 99U | |
#define RTC_SYNCH_PREDIV 9U | |
#define RCC_RTCCLKSOURCE_1MHZ ((uint32_t)((uint32_t)RCC_BDCR_RTCSEL | (uint32_t)((HSE_VALUE/1000000U) << 16U))) | |
#else /* RTC_CLOCK_SOURCE_LSE || RTC_CLOCK_SOURCE_LSI */ | |
#define RTC_ASYNCH_PREDIV 0U | |
#define RTC_SYNCH_PREDIV 31U | |
#endif /* RTC_CLOCK_SOURCE_HSE */ | |
/* Private macro -------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
RTC_HandleTypeDef hRTC_Handle; | |
/* Private function prototypes -----------------------------------------------*/ | |
void RTC_WKUP_IRQHandler(void); | |
/* Private functions ---------------------------------------------------------*/ | |
/** | |
* @brief This function configures the RTC_WKUP as a time base source. | |
* The time source is configured to have 1ms time base with a dedicated | |
* Tick interrupt priority. | |
* Wakeup Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK | |
= 1ms | |
* Wakeup Time = WakeupTimebase * WakeUpCounter (0 + 1) | |
= 1 ms | |
* @note This function is called automatically at the beginning of program after | |
* reset by HAL_Init() or at any time when clock is configured, by HAL_RCC_ClockConfig(). | |
* @param TickPriority: Tick interrupt priority. | |
* @retval HAL status | |
*/ | |
HAL_StatusTypeDef HAL_InitTick (uint32_t TickPriority) | |
{ | |
__IO uint32_t counter = 0U; | |
RCC_OscInitTypeDef RCC_OscInitStruct; | |
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct; | |
#ifdef RTC_CLOCK_SOURCE_LSE | |
/* Configue LSE as RTC clock soucre */ | |
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSE; | |
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; | |
RCC_OscInitStruct.LSEState = RCC_LSE_ON; | |
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSE; | |
#elif defined (RTC_CLOCK_SOURCE_LSI) | |
/* Configue LSI as RTC clock soucre */ | |
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_LSI; | |
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; | |
RCC_OscInitStruct.LSIState = RCC_LSI_ON; | |
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_LSI; | |
#elif defined (RTC_CLOCK_SOURCE_HSE) | |
/* Configue HSE as RTC clock soucre */ | |
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE; | |
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE; | |
RCC_OscInitStruct.HSEState = RCC_HSE_ON; | |
/* Ensure that RTC is clocked by 1MHz */ | |
PeriphClkInitStruct.RTCClockSelection = RCC_RTCCLKSOURCE_1MHZ; | |
#else | |
#error Please select the RTC Clock source | |
#endif /* RTC_CLOCK_SOURCE_LSE */ | |
if(HAL_RCC_OscConfig(&RCC_OscInitStruct) == HAL_OK) | |
{ | |
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_RTC; | |
if(HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) == HAL_OK) | |
{ | |
/* Enable RTC Clock */ | |
__HAL_RCC_RTC_ENABLE(); | |
/* The time base should be 1ms | |
Time base = ((RTC_ASYNCH_PREDIV + 1) * (RTC_SYNCH_PREDIV + 1)) / RTC_CLOCK | |
HSE as RTC clock | |
Time base = ((99 + 1) * (9 + 1)) / 1Mhz | |
= 1ms | |
LSE as RTC clock | |
Time base = ((31 + 1) * (0 + 1)) / 32.768Khz | |
= ~1ms | |
LSI as RTC clock | |
Time base = ((31 + 1) * (0 + 1)) / 32Khz | |
= 1ms | |
*/ | |
hRTC_Handle.Instance = RTC; | |
hRTC_Handle.Init.HourFormat = RTC_HOURFORMAT_24; | |
hRTC_Handle.Init.AsynchPrediv = RTC_ASYNCH_PREDIV; | |
hRTC_Handle.Init.SynchPrediv = RTC_SYNCH_PREDIV; | |
hRTC_Handle.Init.OutPut = RTC_OUTPUT_DISABLE; | |
hRTC_Handle.Init.OutPutPolarity = RTC_OUTPUT_POLARITY_HIGH; | |
hRTC_Handle.Init.OutPutType = RTC_OUTPUT_TYPE_OPENDRAIN; | |
HAL_RTC_Init(&hRTC_Handle); | |
/* Disable the write protection for RTC registers */ | |
__HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); | |
/* Disable the Wake-up Timer */ | |
__HAL_RTC_WAKEUPTIMER_DISABLE(&hRTC_Handle); | |
/* In case of interrupt mode is used, the interrupt source must disabled */ | |
__HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle,RTC_IT_WUT); | |
/* Wait till RTC WUTWF flag is set */ | |
while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(&hRTC_Handle, RTC_FLAG_WUTWF) == RESET) | |
{ | |
if(counter++ == (SystemCoreClock /48U)) | |
{ | |
return HAL_ERROR; | |
} | |
} | |
/* Clear PWR wake up Flag */ | |
__HAL_PWR_CLEAR_FLAG(PWR_FLAG_WU); | |
/* Clear RTC Wake Up timer Flag */ | |
__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&hRTC_Handle, RTC_FLAG_WUTF); | |
/* Configure the Wake-up Timer counter */ | |
hRTC_Handle.Instance->WUTR = (uint32_t)0U; | |
/* Clear the Wake-up Timer clock source bits in CR register */ | |
hRTC_Handle.Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; | |
/* Configure the clock source */ | |
hRTC_Handle.Instance->CR |= (uint32_t)RTC_WAKEUPCLOCK_CK_SPRE_16BITS; | |
/* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ | |
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT(); | |
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE(); | |
/* Configure the Interrupt in the RTC_CR register */ | |
__HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle,RTC_IT_WUT); | |
/* Enable the Wake-up Timer */ | |
__HAL_RTC_WAKEUPTIMER_ENABLE(&hRTC_Handle); | |
/* Enable the write protection for RTC registers */ | |
__HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); | |
HAL_NVIC_SetPriority(RTC_WKUP_IRQn, TickPriority, 0U); | |
HAL_NVIC_EnableIRQ(RTC_WKUP_IRQn); | |
return HAL_OK; | |
} | |
} | |
return HAL_ERROR; | |
} | |
/** | |
* @brief Suspend Tick increment. | |
* @note Disable the tick increment by disabling RTC_WKUP interrupt. | |
* @param None | |
* @retval None | |
*/ | |
void HAL_SuspendTick(void) | |
{ | |
/* Disable the write protection for RTC registers */ | |
__HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); | |
/* Disable WAKE UP TIMER Interrupt */ | |
__HAL_RTC_WAKEUPTIMER_DISABLE_IT(&hRTC_Handle, RTC_IT_WUT); | |
/* Enable the write protection for RTC registers */ | |
__HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); | |
} | |
/** | |
* @brief Resume Tick increment. | |
* @note Enable the tick increment by Enabling RTC_WKUP interrupt. | |
* @param None | |
* @retval None | |
*/ | |
void HAL_ResumeTick(void) | |
{ | |
/* Disable the write protection for RTC registers */ | |
__HAL_RTC_WRITEPROTECTION_DISABLE(&hRTC_Handle); | |
/* Enable WAKE UP TIMER interrupt */ | |
__HAL_RTC_WAKEUPTIMER_ENABLE_IT(&hRTC_Handle, RTC_IT_WUT); | |
/* Enable the write protection for RTC registers */ | |
__HAL_RTC_WRITEPROTECTION_ENABLE(&hRTC_Handle); | |
} | |
/** | |
* @brief Wake Up Timer Event Callback in non blocking mode | |
* @note This function is called when RTC_WKUP interrupt took place, inside | |
* RTC_WKUP_IRQHandler(). It makes a direct call to HAL_IncTick() to increment | |
* a global variable "uwTick" used as application time base. | |
* @param hrtc : RTC handle | |
* @retval None | |
*/ | |
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) | |
{ | |
HAL_IncTick(); | |
} | |
/** | |
* @brief This function handles WAKE UP TIMER interrupt request. | |
* @param None | |
* @retval None | |
*/ | |
void RTC_WKUP_IRQHandler(void) | |
{ | |
HAL_RTCEx_WakeUpTimerIRQHandler(&hRTC_Handle); | |
} | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |