/** | |
****************************************************************************** | |
* @file stm32l4xx_hal_smartcard_ex.c | |
* @author MCD Application Team | |
* @version V1.6.0 | |
* @date 28-October-2016 | |
* @brief SMARTCARD HAL module driver. | |
* This file provides extended firmware functions to manage the following | |
* functionalities of the SmartCard. | |
* + Initialization and de-initialization functions | |
* + Peripheral Control functions | |
* | |
* | |
@verbatim | |
============================================================================= | |
##### SMARTCARD peripheral extended features ##### | |
============================================================================= | |
[..] | |
The Extended SMARTCARD HAL driver can be used as follows: | |
(#) After having configured the SMARTCARD basic features with HAL_SMARTCARD_Init(), | |
then program SMARTCARD advanced features if required (TX/RX pins swap, TimeOut, | |
auto-retry counter,...) in the hsmartcard AdvancedInit structure. | |
@endverbatim | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32l4xx_hal.h" | |
/** @addtogroup STM32L4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @defgroup SMARTCARDEx SMARTCARDEx | |
* @brief SMARTCARD Extended HAL module driver | |
* @{ | |
*/ | |
#ifdef HAL_SMARTCARD_MODULE_ENABLED | |
/* Private typedef -----------------------------------------------------------*/ | |
/* Private define ------------------------------------------------------------*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/* Private function prototypes -----------------------------------------------*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup SMARTCARDEx_Exported_Functions SMARTCARD Extended Exported Functions | |
* @{ | |
*/ | |
/** @defgroup SMARTCARDEx_Exported_Functions_Group1 Extended Peripheral Control functions | |
* @brief Extended control functions | |
* | |
@verbatim | |
=============================================================================== | |
##### Peripheral Control functions ##### | |
=============================================================================== | |
[..] | |
This subsection provides a set of functions allowing to initialize the SMARTCARD. | |
(+) HAL_SMARTCARDEx_BlockLength_Config() API allows to configure the Block Length on the fly | |
(+) HAL_SMARTCARDEx_TimeOut_Config() API allows to configure the receiver timeout value on the fly | |
(+) HAL_SMARTCARDEx_EnableReceiverTimeOut() API enables the receiver timeout feature | |
(+) HAL_SMARTCARDEx_DisableReceiverTimeOut() API disables the receiver timeout feature | |
@endverbatim | |
* @{ | |
*/ | |
/** | |
* @brief Update on the fly the SMARTCARD block length in RTOR register. | |
* @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains | |
* the configuration information for the specified SMARTCARD module. | |
* @param BlockLength: SMARTCARD block length (8-bit long at most) | |
* @retval None | |
*/ | |
void HAL_SMARTCARDEx_BlockLength_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint8_t BlockLength) | |
{ | |
MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_BLEN, ((uint32_t)BlockLength << SMARTCARD_RTOR_BLEN_LSB_POS)); | |
} | |
/** | |
* @brief Update on the fly the receiver timeout value in RTOR register. | |
* @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains | |
* the configuration information for the specified SMARTCARD module. | |
* @param TimeOutValue: receiver timeout value in number of baud blocks. The timeout | |
* value must be less or equal to 0x0FFFFFFFF. | |
* @retval None | |
*/ | |
void HAL_SMARTCARDEx_TimeOut_Config(SMARTCARD_HandleTypeDef *hsmartcard, uint32_t TimeOutValue) | |
{ | |
assert_param(IS_SMARTCARD_TIMEOUT_VALUE(hsmartcard->Init.TimeOutValue)); | |
MODIFY_REG(hsmartcard->Instance->RTOR, USART_RTOR_RTO, TimeOutValue); | |
} | |
/** | |
* @brief Enable the SMARTCARD receiver timeout feature. | |
* @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains | |
* the configuration information for the specified SMARTCARD module. | |
* @retval HAL status | |
*/ | |
HAL_StatusTypeDef HAL_SMARTCARDEx_EnableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) | |
{ | |
if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY) | |
{ | |
/* Process Locked */ | |
__HAL_LOCK(hsmartcard); | |
hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; | |
/* Set the USART RTOEN bit */ | |
SET_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); | |
hsmartcard->gState = HAL_SMARTCARD_STATE_READY; | |
/* Process Unlocked */ | |
__HAL_UNLOCK(hsmartcard); | |
return HAL_OK; | |
} | |
else | |
{ | |
return HAL_BUSY; | |
} | |
} | |
/** | |
* @brief Disable the SMARTCARD receiver timeout feature. | |
* @param hsmartcard: Pointer to a SMARTCARD_HandleTypeDef structure that contains | |
* the configuration information for the specified SMARTCARD module. | |
* @retval HAL status | |
*/ | |
HAL_StatusTypeDef HAL_SMARTCARDEx_DisableReceiverTimeOut(SMARTCARD_HandleTypeDef *hsmartcard) | |
{ | |
if(hsmartcard->gState == HAL_SMARTCARD_STATE_READY) | |
{ | |
/* Process Locked */ | |
__HAL_LOCK(hsmartcard); | |
hsmartcard->gState = HAL_SMARTCARD_STATE_BUSY; | |
/* Clear the USART RTOEN bit */ | |
CLEAR_BIT(hsmartcard->Instance->CR2, USART_CR2_RTOEN); | |
hsmartcard->gState = HAL_SMARTCARD_STATE_READY; | |
/* Process Unlocked */ | |
__HAL_UNLOCK(hsmartcard); | |
return HAL_OK; | |
} | |
else | |
{ | |
return HAL_BUSY; | |
} | |
} | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#endif /* HAL_SMARTCARD_MODULE_ENABLED */ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |