| # I2C configuration options |
| |
| # Copyright (c) 2015 Intel Corporation |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| # |
| # I2C options |
| # |
| menuconfig I2C |
| bool "I2C Drivers" |
| help |
| Enable I2C Driver Configuration |
| |
| if I2C |
| |
| config I2C_SHELL |
| bool "I2C Shell" |
| default y |
| depends on SHELL |
| help |
| Enable I2C Shell. |
| |
| The I2C shell currently support scanning and bus recovery. |
| |
| config I2C_STATS |
| bool "I2C device Stats" |
| depends on STATS |
| help |
| Enable I2C Stats. |
| |
| # Include these first so that any properties (e.g. defaults) below can be |
| # overridden (by defining symbols in multiple locations) |
| source "drivers/i2c/Kconfig.b91" |
| source "drivers/i2c/Kconfig.cc13xx_cc26xx" |
| source "drivers/i2c/Kconfig.dw" |
| source "drivers/i2c/Kconfig.esp32" |
| source "drivers/i2c/target/Kconfig" |
| source "drivers/i2c/Kconfig.gpio" |
| source "drivers/i2c/Kconfig.xec" |
| source "drivers/i2c/Kconfig.nrfx" |
| source "drivers/i2c/Kconfig.i2c_emul" |
| source "drivers/i2c/Kconfig.it8xxx2" |
| source "drivers/i2c/Kconfig.sbcon" |
| source "drivers/i2c/Kconfig.sifive" |
| source "drivers/i2c/Kconfig.stm32" |
| source "drivers/i2c/Kconfig.sam0" |
| source "drivers/i2c/Kconfig.litex" |
| source "drivers/i2c/Kconfig.lpc11u6x" |
| source "drivers/i2c/Kconfig.npcx" |
| source "drivers/i2c/Kconfig.test" |
| source "drivers/i2c/Kconfig.rcar" |
| source "drivers/i2c/Kconfig.tca954x" |
| source "drivers/i2c/Kconfig.gd32" |
| |
| config I2C_INIT_PRIORITY |
| int "Init priority" |
| default KERNEL_INIT_PRIORITY_DEVICE |
| help |
| I2C device driver initialization priority. |
| |
| |
| module = I2C |
| module-str = i2c |
| source "subsys/logging/Kconfig.template.log_config" |
| |
| config I2C_GECKO |
| bool "Gecko I2C driver" |
| depends on HAS_SILABS_GECKO |
| select SOC_GECKO_I2C |
| help |
| Enable the SiLabs Gecko I2C bus driver. |
| |
| config I2C_SAM_TWIHS |
| bool "Atmel SAM (TWIHS) I2C driver" |
| depends on SOC_FAMILY_SAM |
| help |
| Enable Atmel SAM MCU Family (TWIHS) I2C bus driver. |
| |
| config I2C_SAM_TWIM |
| bool "Atmel SAM (TWIM) I2C driver" |
| depends on SOC_SERIES_SAM4L |
| help |
| Enable Atmel SAM MCU Family (TWIM) I2C bus driver. |
| |
| config I2C_SAM_TWI |
| bool "Atmel SAM (TWI) I2C driver" |
| depends on SOC_FAMILY_SAM |
| help |
| Enable Atmel SAM MCU Family (TWI) I2C bus driver. |
| |
| config I2C_MCUX |
| bool "MCUX I2C driver" |
| depends on HAS_MCUX |
| select PINCTRL |
| help |
| Enable the mcux I2C driver. |
| |
| config I2C_MCUX_FLEXCOMM |
| bool "MCUX FLEXCOMM I2C driver" |
| depends on HAS_MCUX_FLEXCOMM |
| help |
| Enable the mcux flexcomm i2c driver. |
| |
| config I2C_MCUX_LPI2C |
| bool "MCUX LPI2C driver" |
| depends on HAS_MCUX_LPI2C && CLOCK_CONTROL |
| help |
| Enable the mcux LPI2C driver. |
| |
| config I2C_MCUX_LPI2C_BUS_RECOVERY |
| bool "Bus recovery support" |
| depends on I2C_MCUX_LPI2C && PINCTRL |
| select I2C_BITBANG |
| help |
| Enable LPI2C driver bus recovery support via GPIO bitbanging. |
| |
| config I2C_IMX |
| bool "i.MX I2C driver" |
| depends on HAS_IMX_I2C |
| help |
| Enable the i.MX I2C driver. |
| |
| config I2C_CC32XX |
| bool "CC32XX I2C driver" |
| depends on SOC_SERIES_CC32XX |
| help |
| Enable the CC32XX I2C driver. |
| |
| config I2C_BITBANG |
| bool |
| help |
| Enable library used for software driven (bit banging) I2C support |
| |
| config I2C_NIOS2 |
| bool "Nios-II I2C driver" |
| depends on HAS_ALTERA_HAL |
| help |
| Enable the Nios-II I2C driver. |
| |
| config I2C_RV32M1_LPI2C |
| bool "RV32M1 LPI2C driver" |
| depends on HAS_RV32M1_LPI2C && CLOCK_CONTROL |
| help |
| Enable the RV32M1 LPI2C driver. |
| |
| endif # I2C |
