| .. _bq274xx-sample: |
| |
| BQ274XX Sensor Sample |
| ##################### |
| |
| Overview |
| ******** |
| |
| This sample application retrieves all the fuel gauge parameters, |
| - Voltage, in volts |
| - Average current, in amps |
| - Standby current, in amps |
| - Maximum load current, in amps |
| - Gauge temperature |
| - State of charge measurement in percentage |
| - Full Charge Capacity in mAh |
| - Remaining Charge Capacity in mAh |
| - Nominal Available Capacity in mAh |
| - Full Available Capacity in mAh |
| - Average power in mW |
| - State of health measurement in percentage |
| |
| from BQ274XX sensor and prints this information to the UART console. |
| |
| Requirements |
| ************ |
| |
| - nrf9160_innblue22 board with BQ274XX sensor `BQ274XX Sensor`_ |
| |
| Building and Running |
| ******************** |
| |
| Build this sample using the following commands: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/sensor/bq274xx |
| :board: nrf9160_innblue22 |
| :goals: build flash |
| |
| References |
| ********** |
| |
| .. target-notes:: |
| |
| .. _BQ274XX Sensor: http://www.ti.com/lit/ds/symlink/bq27421-g1.pdf |
