blob: 57bdb8f84198168f54ccc85591194aaf4c6d6872 [file] [log] [blame]
/*
* Copyright (c) 2018 Aurelien Jarno
* Copyright (c) 2023 Gerson Fernando Budke
*
* SPDX-License-Identifier: Apache-2.0
*/
#define DT_DRV_COMPAT atmel_sam_trng
#include <zephyr/device.h>
#include <zephyr/drivers/entropy.h>
#include <zephyr/drivers/clock_control/atmel_sam_pmc.h>
#include <errno.h>
#include <zephyr/init.h>
#include <zephyr/kernel.h>
#include <soc.h>
#include <string.h>
struct trng_sam_dev_cfg {
Trng *regs;
};
static inline bool _ready(Trng * const trng)
{
#ifdef TRNG_ISR_DATRDY
return trng->TRNG_ISR & TRNG_ISR_DATRDY;
#else
return trng->INTFLAG.bit.DATARDY;
#endif
}
static inline uint32_t _data(Trng * const trng)
{
#ifdef REG_TRNG_DATA
(void) trng;
return TRNG->DATA.reg;
#else
return trng->TRNG_ODATA;
#endif
}
static int entropy_sam_wait_ready(Trng * const trng)
{
/* According to the reference manual, the generator provides
* one 32-bit random value every 84 peripheral clock cycles.
* MCK may not be smaller than HCLK/4, so it should not take
* more than 336 HCLK ticks. Assuming the CPU can do 1
* instruction per HCLK the number of times to loop before
* the TRNG is ready is less than 1000. And that is when
* assuming the loop only takes 1 instruction. So looping a
* million times should be more than enough.
*/
int timeout = 1000000;
while (!_ready(trng)) {
if (timeout-- == 0) {
return -ETIMEDOUT;
}
}
return 0;
}
static int entropy_sam_get_entropy_internal(const struct device *dev,
uint8_t *buffer,
uint16_t length)
{
const struct trng_sam_dev_cfg *config = dev->config;
Trng *const trng = config->regs;
while (length > 0) {
size_t to_copy;
uint32_t value;
int res;
res = entropy_sam_wait_ready(trng);
if (res < 0) {
return res;
}
value = _data(trng);
to_copy = MIN(length, sizeof(value));
memcpy(buffer, &value, to_copy);
buffer += to_copy;
length -= to_copy;
}
return 0;
}
static int entropy_sam_get_entropy(const struct device *dev, uint8_t *buffer,
uint16_t length)
{
return entropy_sam_get_entropy_internal(dev, buffer, length);
}
static int entropy_sam_get_entropy_isr(const struct device *dev,
uint8_t *buffer,
uint16_t length, uint32_t flags)
{
uint16_t cnt = length;
if ((flags & ENTROPY_BUSYWAIT) == 0U) {
const struct trng_sam_dev_cfg *config = dev->config;
/* No busy wait; return whatever data is available. */
Trng * const trng = config->regs;
do {
size_t to_copy;
uint32_t value;
if (!_ready(trng)) {
/* Data not ready */
break;
}
value = _data(trng);
to_copy = MIN(length, sizeof(value));
memcpy(buffer, &value, to_copy);
buffer += to_copy;
length -= to_copy;
} while (length > 0);
return cnt - length;
} else {
/* Allowed to busy-wait */
int ret =
entropy_sam_get_entropy_internal(dev,
buffer, length);
if (ret == 0) {
/* Data retrieved successfully. */
return cnt;
}
return ret;
}
}
static int entropy_sam_init(const struct device *dev)
{
const struct trng_sam_dev_cfg *config = dev->config;
Trng *const trng = config->regs;
#ifdef MCLK
/* Enable the MCLK */
MCLK->APBCMASK.bit.TRNG_ = 1;
/* Enable the TRNG */
trng->CTRLA.bit.ENABLE = 1;
#else
/* Enable TRNG in PMC */
const struct atmel_sam_pmc_config clock_cfg = SAM_DT_INST_CLOCK_PMC_CFG(0);
(void)clock_control_on(SAM_DT_PMC_CONTROLLER,
(clock_control_subsys_t)&clock_cfg);
/* Enable the TRNG */
trng->TRNG_CR = TRNG_CR_KEY_PASSWD | TRNG_CR_ENABLE;
#endif
return 0;
}
static const struct entropy_driver_api entropy_sam_api = {
.get_entropy = entropy_sam_get_entropy,
.get_entropy_isr = entropy_sam_get_entropy_isr
};
static const struct trng_sam_dev_cfg trng_sam_cfg = {
.regs = (Trng *)DT_INST_REG_ADDR(0),
};
DEVICE_DT_INST_DEFINE(0,
entropy_sam_init, NULL,
NULL, &trng_sam_cfg,
PRE_KERNEL_1, CONFIG_ENTROPY_INIT_PRIORITY,
&entropy_sam_api);