blob: 957129a3d0e3a879c7c4cc19b39558c40662c8e7 [file] [log] [blame]
/*
* Copyright (c) 2023 Antmicro <www.antmicro.com>
*
* SPDX-License-Identifier: Apache-2.0
*/
#ifndef ZEPHYR_SOC_ARM_QUICKLOGIC_EOS_S3_PINCTRL_H_
#define ZEPHYR_SOC_ARM_QUICKLOGIC_EOS_S3_PINCTRL_H_
#include <zephyr/types.h>
#ifdef __cplusplus
extern "C" {
#endif
typedef struct pinctrl_soc_pin_t {
uint32_t pin;
uint32_t iof;
uint32_t input_enable: 1;
uint32_t output_enable: 1;
uint32_t pull_up: 1;
uint32_t pull_down: 1;
uint32_t high_impedance: 1;
uint32_t slew_rate: 2;
uint8_t drive_strength;
uint32_t schmitt_enable: 1;
uint32_t control_selection: 2;
} pinctrl_soc_pin_t;
#define QUICKLOGIC_EOS_S3_DT_PIN(node_id) \
{ \
.pin = DT_PROP_BY_IDX(node_id, pinmux, 0), \
.iof = DT_PROP_BY_IDX(node_id, pinmux, 1), \
.input_enable = DT_PROP(node_id, input_enable), \
.output_enable = DT_PROP(node_id, output_enable), \
.pull_up = DT_PROP(node_id, bias_pull_up), \
.pull_down = DT_PROP(node_id, bias_pull_down), \
.high_impedance = DT_PROP(node_id, bias_high_impedance), \
.slew_rate = DT_ENUM_IDX(node_id, slew_rate), \
.drive_strength = DT_PROP_OR(node_id, drive_strength, 4), \
.schmitt_enable = DT_PROP(node_id, input_schmitt_enable), \
.control_selection = DT_ENUM_IDX(node_id, quicklogic_control_selection), \
},
#define Z_PINCTRL_STATE_PIN_INIT(node_id, prop, idx) \
QUICKLOGIC_EOS_S3_DT_PIN(DT_PROP_BY_IDX(node_id, prop, idx))
#define Z_PINCTRL_STATE_PINS_INIT(node_id, prop) \
{ DT_FOREACH_PROP_ELEM(node_id, prop, Z_PINCTRL_STATE_PIN_INIT) }
#ifdef __cplusplus
}
#endif
#endif /* ZEPHYR_SOC_ARM_QUICKLOGIC_EOS_S3_PINCTRL_H_ */