| # Raspberry Pi RP2XXX MCU line |
| |
| # Copyright (c) 2021 Nordic Semiconductor ASA |
| # Copyright (c) 2021 Yonatan Schachter |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| config SOC_SERIES_RP2XXX |
| select ARM |
| select CPU_CORTEX_M0PLUS |
| select CPU_CORTEX_M_HAS_SYSTICK |
| select CPU_CORTEX_M_HAS_VTOR |
| select CPU_HAS_ARM_MPU |
| select HAS_RPI_PICO |
| select XIP |
| select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE |
| help |
| Enable support for Raspberry Pi RP2 MCU series |
| |
| config RP2_REQUIRES_SECOND_STAGE_BOOT |
| bool |
| default y if FLASH_LOAD_OFFSET = 0x100 |
| |
| # Flash type used by the SoC. The board should select the one used. |
| |
| config RP2_FLASH_W25Q080 |
| bool |
| help |
| Configure RP2 to use a W25Q080 flash chip, or similar. Should be selected |
| by the board definition, not the user. |
| |
| config RP2_FLASH_GENERIC_03H |
| bool |
| help |
| Configure RP2 to use a flash chip supporting the standard 03h command. |
| Should be selected by the board definition, not the user. |
| |
| config RP2_FLASH_IS25LP080 |
| bool |
| help |
| Configure RP2 to use a IS25LP080 flash chip, or similar. Should be selected |
| by the board definition, not the user. |
| |
| config RP2_FLASH_W25X10CL |
| bool |
| help |
| Configure RP2 to use a W25X10CL flash chip, or similar. Should be selected |
| by the board definition, not the user. |
| |
| config RP2_FLASH_AT25SF128A |
| bool |
| help |
| Configure RP2 to use a AT25SF128A flash chip, or similar. Should be selected |
| by the board definition, not the user. |
