| /* h4.c - H:4 UART based Bluetooth driver */ |
| |
| /* |
| * Copyright (c) 2015-2016 Intel Corporation |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <errno.h> |
| #include <stddef.h> |
| |
| #include <zephyr/zephyr.h> |
| #include <zephyr/arch/cpu.h> |
| |
| #include <zephyr/init.h> |
| #include <zephyr/drivers/uart.h> |
| #include <zephyr/sys/util.h> |
| #include <zephyr/sys/byteorder.h> |
| #include <string.h> |
| |
| #include <zephyr/bluetooth/bluetooth.h> |
| #include <zephyr/bluetooth/hci.h> |
| #include <zephyr/drivers/bluetooth/hci_driver.h> |
| |
| #define BT_DBG_ENABLED IS_ENABLED(CONFIG_BT_DEBUG_HCI_DRIVER) |
| #define LOG_MODULE_NAME bt_driver |
| #include "common/log.h" |
| |
| #include "../util.h" |
| |
| #define H4_NONE 0x00 |
| #define H4_CMD 0x01 |
| #define H4_ACL 0x02 |
| #define H4_SCO 0x03 |
| #define H4_EVT 0x04 |
| #define H4_ISO 0x05 |
| |
| static K_KERNEL_STACK_DEFINE(rx_thread_stack, CONFIG_BT_RX_STACK_SIZE); |
| static struct k_thread rx_thread_data; |
| |
| static struct { |
| struct net_buf *buf; |
| struct k_fifo fifo; |
| |
| uint16_t remaining; |
| uint16_t discard; |
| |
| bool have_hdr; |
| bool discardable; |
| |
| uint8_t hdr_len; |
| |
| uint8_t type; |
| union { |
| struct bt_hci_evt_hdr evt; |
| struct bt_hci_acl_hdr acl; |
| struct bt_hci_iso_hdr iso; |
| uint8_t hdr[4]; |
| }; |
| } rx = { |
| .fifo = Z_FIFO_INITIALIZER(rx.fifo), |
| }; |
| |
| static struct { |
| uint8_t type; |
| struct net_buf *buf; |
| struct k_fifo fifo; |
| } tx = { |
| .fifo = Z_FIFO_INITIALIZER(tx.fifo), |
| }; |
| |
| static const struct device *h4_dev; |
| |
| static inline void h4_get_type(void) |
| { |
| /* Get packet type */ |
| if (uart_fifo_read(h4_dev, &rx.type, 1) != 1) { |
| BT_WARN("Unable to read H:4 packet type"); |
| rx.type = H4_NONE; |
| return; |
| } |
| |
| switch (rx.type) { |
| case H4_EVT: |
| rx.remaining = sizeof(rx.evt); |
| rx.hdr_len = rx.remaining; |
| break; |
| case H4_ACL: |
| rx.remaining = sizeof(rx.acl); |
| rx.hdr_len = rx.remaining; |
| break; |
| case H4_ISO: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| rx.remaining = sizeof(rx.iso); |
| rx.hdr_len = rx.remaining; |
| break; |
| } |
| __fallthrough; |
| default: |
| BT_ERR("Unknown H:4 type 0x%02x", rx.type); |
| rx.type = H4_NONE; |
| } |
| } |
| |
| static void h4_read_hdr(void) |
| { |
| int bytes_read = rx.hdr_len - rx.remaining; |
| int ret; |
| |
| ret = uart_fifo_read(h4_dev, rx.hdr + bytes_read, rx.remaining); |
| if (unlikely(ret < 0)) { |
| BT_ERR("Unable to read from UART (ret %d)", ret); |
| } else { |
| rx.remaining -= ret; |
| } |
| } |
| |
| static inline void get_acl_hdr(void) |
| { |
| h4_read_hdr(); |
| |
| if (!rx.remaining) { |
| struct bt_hci_acl_hdr *hdr = &rx.acl; |
| |
| rx.remaining = sys_le16_to_cpu(hdr->len); |
| BT_DBG("Got ACL header. Payload %u bytes", rx.remaining); |
| rx.have_hdr = true; |
| } |
| } |
| |
| static inline void get_iso_hdr(void) |
| { |
| h4_read_hdr(); |
| |
| if (!rx.remaining) { |
| struct bt_hci_iso_hdr *hdr = &rx.iso; |
| |
| rx.remaining = bt_iso_hdr_len(sys_le16_to_cpu(hdr->len)); |
| BT_DBG("Got ISO header. Payload %u bytes", rx.remaining); |
| rx.have_hdr = true; |
| } |
| } |
| |
| static inline void get_evt_hdr(void) |
| { |
| struct bt_hci_evt_hdr *hdr = &rx.evt; |
| |
| h4_read_hdr(); |
| |
| if (rx.hdr_len == sizeof(*hdr) && rx.remaining < sizeof(*hdr)) { |
| switch (rx.evt.evt) { |
| case BT_HCI_EVT_LE_META_EVENT: |
| rx.remaining++; |
| rx.hdr_len++; |
| break; |
| #if defined(CONFIG_BT_BREDR) |
| case BT_HCI_EVT_INQUIRY_RESULT_WITH_RSSI: |
| case BT_HCI_EVT_EXTENDED_INQUIRY_RESULT: |
| rx.discardable = true; |
| break; |
| #endif |
| } |
| } |
| |
| if (!rx.remaining) { |
| if (rx.evt.evt == BT_HCI_EVT_LE_META_EVENT && |
| (rx.hdr[sizeof(*hdr)] == BT_HCI_EVT_LE_ADVERTISING_REPORT)) { |
| BT_DBG("Marking adv report as discardable"); |
| rx.discardable = true; |
| } |
| |
| rx.remaining = hdr->len - (rx.hdr_len - sizeof(*hdr)); |
| BT_DBG("Got event header. Payload %u bytes", hdr->len); |
| rx.have_hdr = true; |
| } |
| } |
| |
| |
| static inline void copy_hdr(struct net_buf *buf) |
| { |
| net_buf_add_mem(buf, rx.hdr, rx.hdr_len); |
| } |
| |
| static void reset_rx(void) |
| { |
| rx.type = H4_NONE; |
| rx.remaining = 0U; |
| rx.have_hdr = false; |
| rx.hdr_len = 0U; |
| rx.discardable = false; |
| } |
| |
| static struct net_buf *get_rx(k_timeout_t timeout) |
| { |
| BT_DBG("type 0x%02x, evt 0x%02x", rx.type, rx.evt.evt); |
| |
| switch (rx.type) { |
| case H4_EVT: |
| return bt_buf_get_evt(rx.evt.evt, rx.discardable, timeout); |
| case H4_ACL: |
| return bt_buf_get_rx(BT_BUF_ACL_IN, timeout); |
| case H4_ISO: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| return bt_buf_get_rx(BT_BUF_ISO_IN, timeout); |
| } |
| } |
| |
| return NULL; |
| } |
| |
| static void rx_thread(void *p1, void *p2, void *p3) |
| { |
| struct net_buf *buf; |
| |
| ARG_UNUSED(p1); |
| ARG_UNUSED(p2); |
| ARG_UNUSED(p3); |
| |
| BT_DBG("started"); |
| |
| while (1) { |
| BT_DBG("rx.buf %p", rx.buf); |
| |
| /* We can only do the allocation if we know the initial |
| * header, since Command Complete/Status events must use the |
| * original command buffer (if available). |
| */ |
| if (rx.have_hdr && !rx.buf) { |
| rx.buf = get_rx(K_FOREVER); |
| BT_DBG("Got rx.buf %p", rx.buf); |
| if (rx.remaining > net_buf_tailroom(rx.buf)) { |
| BT_ERR("Not enough space in buffer"); |
| rx.discard = rx.remaining; |
| reset_rx(); |
| } else { |
| copy_hdr(rx.buf); |
| } |
| } |
| |
| /* Let the ISR continue receiving new packets */ |
| uart_irq_rx_enable(h4_dev); |
| |
| buf = net_buf_get(&rx.fifo, K_FOREVER); |
| do { |
| uart_irq_rx_enable(h4_dev); |
| |
| BT_DBG("Calling bt_recv(%p)", buf); |
| bt_recv(buf); |
| |
| /* Give other threads a chance to run if the ISR |
| * is receiving data so fast that rx.fifo never |
| * or very rarely goes empty. |
| */ |
| k_yield(); |
| |
| uart_irq_rx_disable(h4_dev); |
| buf = net_buf_get(&rx.fifo, K_NO_WAIT); |
| } while (buf); |
| } |
| } |
| |
| static size_t h4_discard(const struct device *uart, size_t len) |
| { |
| uint8_t buf[33]; |
| int err; |
| |
| err = uart_fifo_read(uart, buf, MIN(len, sizeof(buf))); |
| if (unlikely(err < 0)) { |
| BT_ERR("Unable to read from UART (err %d)", err); |
| return 0; |
| } |
| |
| return err; |
| } |
| |
| static inline void read_payload(void) |
| { |
| struct net_buf *buf; |
| uint8_t evt_flags; |
| int read; |
| |
| if (!rx.buf) { |
| size_t buf_tailroom; |
| |
| rx.buf = get_rx(K_NO_WAIT); |
| if (!rx.buf) { |
| if (rx.discardable) { |
| BT_WARN("Discarding event 0x%02x", rx.evt.evt); |
| rx.discard = rx.remaining; |
| reset_rx(); |
| return; |
| } |
| |
| BT_WARN("Failed to allocate, deferring to rx_thread"); |
| uart_irq_rx_disable(h4_dev); |
| return; |
| } |
| |
| BT_DBG("Allocated rx.buf %p", rx.buf); |
| |
| buf_tailroom = net_buf_tailroom(rx.buf); |
| if (buf_tailroom < rx.remaining) { |
| BT_ERR("Not enough space in buffer %u/%zu", |
| rx.remaining, buf_tailroom); |
| rx.discard = rx.remaining; |
| reset_rx(); |
| return; |
| } |
| |
| copy_hdr(rx.buf); |
| } |
| |
| read = uart_fifo_read(h4_dev, net_buf_tail(rx.buf), rx.remaining); |
| if (unlikely(read < 0)) { |
| BT_ERR("Failed to read UART (err %d)", read); |
| return; |
| } |
| |
| net_buf_add(rx.buf, read); |
| rx.remaining -= read; |
| |
| BT_DBG("got %d bytes, remaining %u", read, rx.remaining); |
| BT_DBG("Payload (len %u): %s", rx.buf->len, |
| bt_hex(rx.buf->data, rx.buf->len)); |
| |
| if (rx.remaining) { |
| return; |
| } |
| |
| buf = rx.buf; |
| rx.buf = NULL; |
| |
| if (rx.type == H4_EVT) { |
| evt_flags = bt_hci_evt_get_flags(rx.evt.evt); |
| bt_buf_set_type(buf, BT_BUF_EVT); |
| } else { |
| evt_flags = BT_HCI_EVT_FLAG_RECV; |
| bt_buf_set_type(buf, BT_BUF_ACL_IN); |
| } |
| |
| reset_rx(); |
| |
| if (IS_ENABLED(CONFIG_BT_RECV_BLOCKING) && |
| (evt_flags & BT_HCI_EVT_FLAG_RECV_PRIO)) { |
| BT_DBG("Calling bt_recv_prio(%p)", buf); |
| bt_recv_prio(buf); |
| } |
| |
| if (evt_flags & BT_HCI_EVT_FLAG_RECV) { |
| BT_DBG("Putting buf %p to rx fifo", buf); |
| net_buf_put(&rx.fifo, buf); |
| } |
| } |
| |
| static inline void read_header(void) |
| { |
| switch (rx.type) { |
| case H4_NONE: |
| h4_get_type(); |
| return; |
| case H4_EVT: |
| get_evt_hdr(); |
| break; |
| case H4_ACL: |
| get_acl_hdr(); |
| break; |
| case H4_ISO: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| get_iso_hdr(); |
| break; |
| } |
| __fallthrough; |
| default: |
| CODE_UNREACHABLE; |
| return; |
| } |
| |
| if (rx.have_hdr && rx.buf) { |
| if (rx.remaining > net_buf_tailroom(rx.buf)) { |
| BT_ERR("Not enough space in buffer"); |
| rx.discard = rx.remaining; |
| reset_rx(); |
| } else { |
| copy_hdr(rx.buf); |
| } |
| } |
| } |
| |
| static inline void process_tx(void) |
| { |
| int bytes; |
| |
| if (!tx.buf) { |
| tx.buf = net_buf_get(&tx.fifo, K_NO_WAIT); |
| if (!tx.buf) { |
| BT_ERR("TX interrupt but no pending buffer!"); |
| uart_irq_tx_disable(h4_dev); |
| return; |
| } |
| } |
| |
| if (!tx.type) { |
| switch (bt_buf_get_type(tx.buf)) { |
| case BT_BUF_ACL_OUT: |
| tx.type = H4_ACL; |
| break; |
| case BT_BUF_CMD: |
| tx.type = H4_CMD; |
| break; |
| case BT_BUF_ISO_OUT: |
| if (IS_ENABLED(CONFIG_BT_ISO)) { |
| tx.type = H4_ISO; |
| break; |
| } |
| __fallthrough; |
| default: |
| BT_ERR("Unknown buffer type"); |
| goto done; |
| } |
| |
| bytes = uart_fifo_fill(h4_dev, &tx.type, 1); |
| if (bytes != 1) { |
| BT_WARN("Unable to send H:4 type"); |
| tx.type = H4_NONE; |
| return; |
| } |
| } |
| |
| bytes = uart_fifo_fill(h4_dev, tx.buf->data, tx.buf->len); |
| if (unlikely(bytes < 0)) { |
| BT_ERR("Unable to write to UART (err %d)", bytes); |
| } else { |
| net_buf_pull(tx.buf, bytes); |
| } |
| |
| if (tx.buf->len) { |
| return; |
| } |
| |
| done: |
| tx.type = H4_NONE; |
| net_buf_unref(tx.buf); |
| tx.buf = net_buf_get(&tx.fifo, K_NO_WAIT); |
| if (!tx.buf) { |
| uart_irq_tx_disable(h4_dev); |
| } |
| } |
| |
| static inline void process_rx(void) |
| { |
| BT_DBG("remaining %u discard %u have_hdr %u rx.buf %p len %u", |
| rx.remaining, rx.discard, rx.have_hdr, rx.buf, |
| rx.buf ? rx.buf->len : 0); |
| |
| if (rx.discard) { |
| rx.discard -= h4_discard(h4_dev, rx.discard); |
| return; |
| } |
| |
| if (rx.have_hdr) { |
| read_payload(); |
| } else { |
| read_header(); |
| } |
| } |
| |
| static void bt_uart_isr(const struct device *unused, void *user_data) |
| { |
| ARG_UNUSED(unused); |
| ARG_UNUSED(user_data); |
| |
| while (uart_irq_update(h4_dev) && uart_irq_is_pending(h4_dev)) { |
| if (uart_irq_tx_ready(h4_dev)) { |
| process_tx(); |
| } |
| |
| if (uart_irq_rx_ready(h4_dev)) { |
| process_rx(); |
| } |
| } |
| } |
| |
| static int h4_send(struct net_buf *buf) |
| { |
| BT_DBG("buf %p type %u len %u", buf, bt_buf_get_type(buf), buf->len); |
| |
| net_buf_put(&tx.fifo, buf); |
| uart_irq_tx_enable(h4_dev); |
| |
| return 0; |
| } |
| |
| /** Setup the HCI transport, which usually means to reset the Bluetooth IC |
| * |
| * @param dev The device structure for the bus connecting to the IC |
| * |
| * @return 0 on success, negative error value on failure |
| */ |
| int __weak bt_hci_transport_setup(const struct device *dev) |
| { |
| h4_discard(h4_dev, 32); |
| return 0; |
| } |
| |
| static int h4_open(void) |
| { |
| int ret; |
| k_tid_t tid; |
| |
| BT_DBG(""); |
| |
| uart_irq_rx_disable(h4_dev); |
| uart_irq_tx_disable(h4_dev); |
| |
| ret = bt_hci_transport_setup(h4_dev); |
| if (ret < 0) { |
| return -EIO; |
| } |
| |
| uart_irq_callback_set(h4_dev, bt_uart_isr); |
| |
| tid = k_thread_create(&rx_thread_data, rx_thread_stack, |
| K_KERNEL_STACK_SIZEOF(rx_thread_stack), |
| rx_thread, NULL, NULL, NULL, |
| K_PRIO_COOP(CONFIG_BT_RX_PRIO), |
| 0, K_NO_WAIT); |
| k_thread_name_set(tid, "bt_rx_thread"); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_BT_HCI_SETUP) |
| static int h4_setup(void) |
| { |
| /* Extern bt_h4_vnd_setup function. |
| * This function executes vendor-specific commands sequence to |
| * initialize BT Controller before BT Host executes Reset sequence. |
| * bt_h4_vnd_setup function must be implemented in vendor-specific HCI |
| * extansion module if CONFIG_BT_HCI_SETUP is enabled. |
| */ |
| extern int bt_h4_vnd_setup(const struct device *dev); |
| |
| return bt_h4_vnd_setup(h4_dev); |
| } |
| #endif |
| |
| static const struct bt_hci_driver drv = { |
| .name = "H:4", |
| .bus = BT_HCI_DRIVER_BUS_UART, |
| .open = h4_open, |
| .send = h4_send, |
| #if defined(CONFIG_BT_HCI_SETUP) |
| .setup = h4_setup |
| #endif |
| }; |
| |
| static int bt_uart_init(const struct device *unused) |
| { |
| ARG_UNUSED(unused); |
| |
| h4_dev = DEVICE_DT_GET(DT_CHOSEN(zephyr_bt_uart)); |
| if (!device_is_ready(h4_dev)) { |
| return -EINVAL; |
| } |
| |
| bt_hci_driver_register(&drv); |
| |
| return 0; |
| } |
| |
| SYS_INIT(bt_uart_init, POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE); |