| /* |
| * Copyright (c) 2015, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| #include "fsl_lpsci_dma.h" |
| #include "fsl_dmamux.h" |
| |
| /******************************************************************************* |
| * Definitions |
| ******************************************************************************/ |
| |
| /*<! Structure definition for lpsci_dma_handle_t. The structure is private. */ |
| typedef struct _lpsci_dma_private_handle |
| { |
| UART0_Type *base; |
| lpsci_dma_handle_t *handle; |
| } lpsci_dma_private_handle_t; |
| |
| /* LPSCI DMA transfer handle. */ |
| enum _lpsci_dma_tansfer_states |
| { |
| kLPSCI_TxIdle, /* TX idle. */ |
| kLPSCI_TxBusy, /* TX busy. */ |
| kLPSCI_RxIdle, /* RX idle. */ |
| kLPSCI_RxBusy /* RX busy. */ |
| }; |
| |
| /******************************************************************************* |
| * Variables |
| ******************************************************************************/ |
| |
| /*<! Private handle only used for internally. */ |
| static lpsci_dma_private_handle_t s_dmaPrivateHandle[FSL_FEATURE_SOC_LPSCI_COUNT]; |
| |
| /******************************************************************************* |
| * Prototypes |
| ******************************************************************************/ |
| |
| /*! |
| * @brief LPSCI DMA send finished callback function. |
| * |
| * This function is called when LPSCI DMA send finished. It disables the LPSCI |
| * TX DMA request and sends @ref kStatus_LPSCI_TxIdle to LPSCI callback. |
| * |
| * @param handle The DMA handle. |
| * @param param Callback function parameter. |
| */ |
| static void LPSCI_TransferSendDMACallback(dma_handle_t *handle, void *param); |
| |
| /*! |
| * @brief LPSCI DMA receive finished callback function. |
| * |
| * This function is called when LPSCI DMA receive finished. It disables the LPSCI |
| * RX DMA request and sends @ref kStatus_LPSCI_RxIdle to LPSCI callback. |
| * |
| * @param handle The DMA handle. |
| * @param param Callback function parameter. |
| */ |
| static void LPSCI_TransferReceiveDMACallback(dma_handle_t *handle, void *param); |
| |
| /*! |
| * @brief Get the LPSCI instance from peripheral base address. |
| * |
| * @param base LPSCI peripheral base address. |
| * @return LPSCI instance. |
| */ |
| extern uint32_t LPSCI_GetInstance(UART0_Type *base); |
| |
| /******************************************************************************* |
| * Code |
| ******************************************************************************/ |
| static void LPSCI_TransferSendDMACallback(dma_handle_t *handle, void *param) |
| { |
| assert(handle); |
| assert(param); |
| |
| lpsci_dma_private_handle_t *lpsciPrivateHandle = (lpsci_dma_private_handle_t *)param; |
| |
| /* Disable LPSCI TX DMA. */ |
| LPSCI_EnableTxDMA(lpsciPrivateHandle->base, false); |
| |
| /* Disable interrupt. */ |
| DMA_DisableInterrupts(handle->base, handle->channel); |
| |
| lpsciPrivateHandle->handle->txState = kLPSCI_TxIdle; |
| |
| if (lpsciPrivateHandle->handle->callback) |
| { |
| lpsciPrivateHandle->handle->callback(lpsciPrivateHandle->base, lpsciPrivateHandle->handle, kStatus_LPSCI_TxIdle, |
| lpsciPrivateHandle->handle->userData); |
| } |
| } |
| |
| static void LPSCI_TransferReceiveDMACallback(dma_handle_t *handle, void *param) |
| { |
| assert(handle); |
| assert(param); |
| |
| lpsci_dma_private_handle_t *lpsciPrivateHandle = (lpsci_dma_private_handle_t *)param; |
| |
| /* Disable LPSCI RX DMA. */ |
| LPSCI_EnableRxDMA(lpsciPrivateHandle->base, false); |
| |
| /* Disable interrupt. */ |
| DMA_DisableInterrupts(handle->base, handle->channel); |
| |
| lpsciPrivateHandle->handle->rxState = kLPSCI_RxIdle; |
| |
| if (lpsciPrivateHandle->handle->callback) |
| { |
| lpsciPrivateHandle->handle->callback(lpsciPrivateHandle->base, lpsciPrivateHandle->handle, kStatus_LPSCI_RxIdle, |
| lpsciPrivateHandle->handle->userData); |
| } |
| } |
| |
| void LPSCI_TransferCreateHandleDMA(UART0_Type *base, |
| lpsci_dma_handle_t *handle, |
| lpsci_dma_transfer_callback_t callback, |
| void *userData, |
| dma_handle_t *txDmaHandle, |
| dma_handle_t *rxDmaHandle) |
| { |
| assert(handle); |
| |
| uint32_t instance = LPSCI_GetInstance(base); |
| |
| memset(handle, 0, sizeof(lpsci_dma_handle_t)); |
| |
| s_dmaPrivateHandle[instance].base = base; |
| s_dmaPrivateHandle[instance].handle = handle; |
| |
| handle->rxState = kLPSCI_RxIdle; |
| handle->txState = kLPSCI_TxIdle; |
| |
| handle->callback = callback; |
| handle->userData = userData; |
| |
| #if defined(FSL_FEATURE_LPSCI_HAS_FIFO) && FSL_FEATURE_LPSCI_HAS_FIFO |
| /* Note: |
| Take care of the RX FIFO, DMA request only assert when received bytes |
| equal or more than RX water mark, there is potential issue if RX water |
| mark larger than 1. |
| For example, if RX FIFO water mark is 2, upper layer needs 5 bytes and |
| 5 bytes are received. the last byte will be saved in FIFO but not trigger |
| DMA transfer because the water mark is 2. |
| */ |
| if (rxDmaHandle) |
| { |
| base->RWFIFO = 1U; |
| } |
| #endif |
| |
| handle->rxDmaHandle = rxDmaHandle; |
| handle->txDmaHandle = txDmaHandle; |
| |
| /* Configure TX. */ |
| if (txDmaHandle) |
| { |
| DMA_SetCallback(txDmaHandle, LPSCI_TransferSendDMACallback, &s_dmaPrivateHandle[instance]); |
| } |
| |
| /* Configure RX. */ |
| if (rxDmaHandle) |
| { |
| DMA_SetCallback(rxDmaHandle, LPSCI_TransferReceiveDMACallback, &s_dmaPrivateHandle[instance]); |
| } |
| } |
| |
| status_t LPSCI_TransferSendDMA(UART0_Type *base, lpsci_dma_handle_t *handle, lpsci_transfer_t *xfer) |
| { |
| assert(handle); |
| assert(handle->txDmaHandle); |
| assert(xfer); |
| assert(xfer->data); |
| assert(xfer->dataSize); |
| |
| dma_transfer_config_t xferConfig; |
| status_t status; |
| |
| /* If previous TX not finished. */ |
| if (kLPSCI_TxBusy == handle->txState) |
| { |
| status = kStatus_LPSCI_TxBusy; |
| } |
| else |
| { |
| handle->txState = kLPSCI_TxBusy; |
| handle->txDataSizeAll = xfer->dataSize; |
| |
| /* Prepare transfer. */ |
| DMA_PrepareTransfer(&xferConfig, xfer->data, sizeof(uint8_t), (void *)LPSCI_GetDataRegisterAddress(base), |
| sizeof(uint8_t), xfer->dataSize, kDMA_MemoryToPeripheral); |
| |
| /* Submit transfer. */ |
| DMA_SubmitTransfer(handle->txDmaHandle, &xferConfig, kDMA_EnableInterrupt); |
| DMA_StartTransfer(handle->txDmaHandle); |
| |
| /* Enable LPSCI TX DMA. */ |
| LPSCI_EnableTxDMA(base, true); |
| |
| status = kStatus_Success; |
| } |
| |
| return status; |
| } |
| |
| status_t LPSCI_TransferReceiveDMA(UART0_Type *base, lpsci_dma_handle_t *handle, lpsci_transfer_t *xfer) |
| { |
| assert(handle); |
| assert(handle->rxDmaHandle); |
| assert(xfer); |
| assert(xfer->data); |
| assert(xfer->dataSize); |
| |
| dma_transfer_config_t xferConfig; |
| status_t status; |
| |
| /* If previous RX not finished. */ |
| if (kLPSCI_RxBusy == handle->rxState) |
| { |
| status = kStatus_LPSCI_RxBusy; |
| } |
| else |
| { |
| handle->rxState = kLPSCI_RxBusy; |
| handle->rxDataSizeAll = xfer->dataSize; |
| |
| /* Prepare transfer. */ |
| DMA_PrepareTransfer(&xferConfig, (void *)LPSCI_GetDataRegisterAddress(base), sizeof(uint8_t), xfer->data, |
| sizeof(uint8_t), xfer->dataSize, kDMA_PeripheralToMemory); |
| |
| /* Submit transfer. */ |
| DMA_SubmitTransfer(handle->rxDmaHandle, &xferConfig, kDMA_EnableInterrupt); |
| DMA_StartTransfer(handle->rxDmaHandle); |
| |
| /* Enable LPSCI RX DMA. */ |
| LPSCI_EnableRxDMA(base, true); |
| |
| status = kStatus_Success; |
| } |
| |
| return status; |
| } |
| |
| void LPSCI_TransferAbortSendDMA(UART0_Type *base, lpsci_dma_handle_t *handle) |
| { |
| assert(handle); |
| assert(handle->txDmaHandle); |
| |
| /* Disable LPSCI TX DMA. */ |
| LPSCI_EnableTxDMA(base, false); |
| |
| /* Stop transfer. */ |
| DMA_AbortTransfer(handle->txDmaHandle); |
| |
| /* Write DMA->DSR[DONE] to abort transfer and clear status. */ |
| DMA_ClearChannelStatusFlags(handle->txDmaHandle->base, handle->txDmaHandle->channel, kDMA_TransactionsDoneFlag); |
| |
| handle->txState = kLPSCI_TxIdle; |
| } |
| |
| void LPSCI_TransferAbortReceiveDMA(UART0_Type *base, lpsci_dma_handle_t *handle) |
| { |
| assert(handle); |
| assert(handle->rxDmaHandle); |
| |
| /* Disable LPSCI RX DMA. */ |
| LPSCI_EnableRxDMA(base, false); |
| |
| /* Stop transfer. */ |
| DMA_AbortTransfer(handle->rxDmaHandle); |
| |
| /* Write DMA->DSR[DONE] to abort transfer and clear status. */ |
| DMA_ClearChannelStatusFlags(handle->rxDmaHandle->base, handle->rxDmaHandle->channel, kDMA_TransactionsDoneFlag); |
| |
| handle->rxState = kLPSCI_RxIdle; |
| } |
| |
| status_t LPSCI_TransferGetSendCountDMA(UART0_Type *base, lpsci_dma_handle_t *handle, uint32_t *count) |
| { |
| assert(handle); |
| assert(handle->txDmaHandle); |
| assert(count); |
| |
| if (kLPSCI_TxIdle == handle->txState) |
| { |
| return kStatus_NoTransferInProgress; |
| } |
| |
| *count = handle->txDataSizeAll - DMA_GetRemainingBytes(handle->txDmaHandle->base, handle->txDmaHandle->channel); |
| |
| return kStatus_Success; |
| } |
| |
| status_t LPSCI_TransferGetReceiveCountDMA(UART0_Type *base, lpsci_dma_handle_t *handle, uint32_t *count) |
| { |
| assert(handle); |
| assert(handle->rxDmaHandle); |
| assert(count); |
| |
| if (kLPSCI_RxIdle == handle->rxState) |
| { |
| return kStatus_NoTransferInProgress; |
| } |
| |
| *count = handle->rxDataSizeAll - DMA_GetRemainingBytes(handle->rxDmaHandle->base, handle->rxDmaHandle->channel); |
| |
| return kStatus_Success; |
| } |