| /* |
| * Copyright (c) 2015-2016, Freescale Semiconductor, Inc. |
| * Copyright 2016-2017 NXP |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * |
| * o Redistributions of source code must retain the above copyright notice, this list |
| * of conditions and the following disclaimer. |
| * |
| * o Redistributions in binary form must reproduce the above copyright notice, this |
| * list of conditions and the following disclaimer in the documentation and/or |
| * other materials provided with the distribution. |
| * |
| * o Neither the name of the copyright holder nor the names of its |
| * contributors may be used to endorse or promote products derived from this |
| * software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND |
| * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR |
| * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES |
| * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; |
| * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON |
| * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT |
| * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS |
| * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| */ |
| #ifndef _FSL_TRNG_DRIVER_H_ |
| #define _FSL_TRNG_DRIVER_H_ |
| |
| #include "fsl_common.h" |
| |
| #if defined(FSL_FEATURE_SOC_TRNG_COUNT) && FSL_FEATURE_SOC_TRNG_COUNT |
| |
| /*! |
| * @addtogroup trng |
| * @{ |
| */ |
| |
| |
| /******************************************************************************* |
| * Definitions |
| *******************************************************************************/ |
| |
| /*! @name Driver version */ |
| /*@{*/ |
| /*! @brief TRNG driver version 2.0.1. |
| * |
| * Current version: 2.0.1 |
| * |
| * Change log: |
| * - Version 2.0.1 |
| * - add support for KL8x and KL28Z |
| * - update default OSCDIV for K81 to divide by 2 |
| */ |
| #define FSL_TRNG_DRIVER_VERSION (MAKE_VERSION(2, 0, 1)) |
| /*@}*/ |
| |
| /*! @brief TRNG sample mode. Used by trng_config_t. */ |
| typedef enum _trng_sample_mode |
| { |
| kTRNG_SampleModeVonNeumann = 0U, /*!< Use von Neumann data in both Entropy shifter and Statistical Checker. */ |
| kTRNG_SampleModeRaw = 1U, /*!< Use raw data into both Entropy shifter and Statistical Checker. */ |
| kTRNG_SampleModeVonNeumannRaw = |
| 2U /*!< Use von Neumann data in Entropy shifter. Use raw data into Statistical Checker. */ |
| } trng_sample_mode_t; |
| |
| /*! @brief TRNG clock mode. Used by trng_config_t. */ |
| typedef enum _trng_clock_mode |
| { |
| kTRNG_ClockModeRingOscillator = 0U, /*!< Ring oscillator is used to operate the TRNG (default). */ |
| kTRNG_ClockModeSystem = 1U /*!< System clock is used to operate the TRNG. This is for test use only, and |
| indeterminate results may occur. */ |
| } trng_clock_mode_t; |
| |
| /*! @brief TRNG ring oscillator divide. Used by trng_config_t. */ |
| typedef enum _trng_ring_osc_div |
| { |
| kTRNG_RingOscDiv0 = 0U, /*!< Ring oscillator with no divide */ |
| kTRNG_RingOscDiv2 = 1U, /*!< Ring oscillator divided-by-2. */ |
| kTRNG_RingOscDiv4 = 2U, /*!< Ring oscillator divided-by-4. */ |
| kTRNG_RingOscDiv8 = 3U /*!< Ring oscillator divided-by-8. */ |
| } trng_ring_osc_div_t; |
| |
| /*! @brief Data structure for definition of statistical check limits. Used by trng_config_t. */ |
| typedef struct _trng_statistical_check_limit |
| { |
| uint32_t maximum; /*!< Maximum limit.*/ |
| uint32_t minimum; /*!< Minimum limit.*/ |
| } trng_statistical_check_limit_t; |
| |
| /*! |
| * @brief Data structure for the TRNG initialization |
| * |
| * This structure initializes the TRNG by calling the the TRNG_Init() function. |
| * It contains all TRNG configurations. |
| */ |
| typedef struct _trng_user_config |
| { |
| bool lock; /*!< @brief Disable programmability of TRNG registers. */ |
| trng_clock_mode_t clockMode; /*!< @brief Clock mode used to operate TRNG.*/ |
| trng_ring_osc_div_t ringOscDiv; /*!< @brief Ring oscillator divide used by TRNG. */ |
| trng_sample_mode_t sampleMode; /*!< @brief Sample mode of the TRNG ring oscillator. */ |
| /* Seed Control*/ |
| uint16_t |
| entropyDelay; /*!< @brief Entropy Delay. Defines the length (in system clocks) of each Entropy sample taken. */ |
| uint16_t sampleSize; /*!< @brief Sample Size. Defines the total number of Entropy samples that will be taken during |
| Entropy generation. */ |
| uint16_t |
| sparseBitLimit; /*!< @brief Sparse Bit Limit which defines the maximum number of |
| * consecutive samples that may be discarded before an error is generated. |
| * This limit is used only for during von Neumann sampling (enabled by TRNG_HAL_SetSampleMode()). |
| * Samples are discarded if two consecutive raw samples are both 0 or both 1. If |
| * this discarding occurs for a long period of time, it indicates that there is |
| * insufficient Entropy. */ |
| /* Statistical Check Parameters.*/ |
| uint8_t retryCount; /*!< @brief Retry count. It defines the number of times a statistical check may fails |
| * during the TRNG Entropy Generation before generating an error. */ |
| uint8_t longRunMaxLimit; /*!< @brief Largest allowable number of consecutive samples of all 1, or all 0, |
| * that is allowed during the Entropy generation. */ |
| trng_statistical_check_limit_t |
| monobitLimit; /*!< @brief Maximum and minimum limits for statistical check of number of ones/zero detected |
| during entropy generation. */ |
| trng_statistical_check_limit_t |
| runBit1Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 1 |
| detected during entropy generation. */ |
| trng_statistical_check_limit_t |
| runBit2Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 2 |
| detected during entropy generation. */ |
| trng_statistical_check_limit_t |
| runBit3Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 3 |
| detected during entropy generation. */ |
| trng_statistical_check_limit_t |
| runBit4Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 4 |
| detected during entropy generation. */ |
| trng_statistical_check_limit_t |
| runBit5Limit; /*!< @brief Maximum and minimum limits for statistical check of number of runs of length 5 |
| detected during entropy generation. */ |
| trng_statistical_check_limit_t runBit6PlusLimit; /*!< @brief Maximum and minimum limits for statistical check of |
| number of runs of length 6 or more detected during entropy |
| generation. */ |
| trng_statistical_check_limit_t |
| pokerLimit; /*!< @brief Maximum and minimum limits for statistical check of "Poker Test". */ |
| trng_statistical_check_limit_t |
| frequencyCountLimit; /*!< @brief Maximum and minimum limits for statistical check of entropy sample frequency |
| count. */ |
| } trng_config_t; |
| |
| /******************************************************************************* |
| * API |
| *******************************************************************************/ |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| /*! |
| * @brief Initializes the user configuration structure to default values. |
| * |
| * This function initializes the configuration structure to default values. The default |
| * values are as follows. |
| * @code |
| * user_config->lock = 0; |
| * user_config->clockMode = kTRNG_ClockModeRingOscillator; |
| * user_config->ringOscDiv = kTRNG_RingOscDiv0; Or to other kTRNG_RingOscDiv[2|8] depending on the platform. |
| * user_config->sampleMode = kTRNG_SampleModeRaw; |
| * user_config->entropyDelay = 3200; |
| * user_config->sampleSize = 2500; |
| * user_config->sparseBitLimit = TRNG_USER_CONFIG_DEFAULT_SPARSE_BIT_LIMIT; |
| * user_config->retryCount = 63; |
| * user_config->longRunMaxLimit = 34; |
| * user_config->monobitLimit.maximum = 1384; |
| * user_config->monobitLimit.minimum = 1116; |
| * user_config->runBit1Limit.maximum = 405; |
| * user_config->runBit1Limit.minimum = 227; |
| * user_config->runBit2Limit.maximum = 220; |
| * user_config->runBit2Limit.minimum = 98; |
| * user_config->runBit3Limit.maximum = 125; |
| * user_config->runBit3Limit.minimum = 37; |
| * user_config->runBit4Limit.maximum = 75; |
| * user_config->runBit4Limit.minimum = 11; |
| * user_config->runBit5Limit.maximum = 47; |
| * user_config->runBit5Limit.minimum = 1; |
| * user_config->runBit6PlusLimit.maximum = 47; |
| * user_config->runBit6PlusLimit.minimum = 1; |
| * user_config->pokerLimit.maximum = 26912; |
| * user_config->pokerLimit.minimum = 24445; |
| * user_config->frequencyCountLimit.maximum = 25600; |
| * user_config->frequencyCountLimit.minimum = 1600; |
| * @endcode |
| * |
| * @param user_config User configuration structure. |
| * @return If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error. |
| */ |
| status_t TRNG_GetDefaultConfig(trng_config_t *userConfig); |
| |
| /*! |
| * @brief Initializes the TRNG. |
| * |
| * This function initializes the TRNG. |
| * When called, the TRNG entropy generation starts immediately. |
| * |
| * @param base TRNG base address |
| * @param userConfig Pointer to the initialization configuration structure. |
| * @return If successful, returns the kStatus_TRNG_Success. Otherwise, it returns an error. |
| */ |
| status_t TRNG_Init(TRNG_Type *base, const trng_config_t *userConfig); |
| |
| /*! |
| * @brief Shuts down the TRNG. |
| * |
| * This function shuts down the TRNG. |
| * |
| * @param base TRNG base address. |
| */ |
| void TRNG_Deinit(TRNG_Type *base); |
| |
| /*! |
| * @brief Gets random data. |
| * |
| * This function gets random data from the TRNG. |
| * |
| * @param base TRNG base address. |
| * @param data Pointer address used to store random data. |
| * @param dataSize Size of the buffer pointed by the data parameter. |
| * @return random data |
| */ |
| status_t TRNG_GetRandomData(TRNG_Type *base, void *data, size_t dataSize); |
| |
| #if defined(__cplusplus) |
| } |
| #endif |
| |
| /*! @}*/ |
| |
| #endif /* FSL_FEATURE_SOC_TRNG_COUNT */ |
| #endif /*_FSL_TRNG_H_*/ |