| /** |
| ****************************************************************************** |
| * @file stm32f3xx_hal_comp.h |
| * @author MCD Application Team |
| * @brief Header file of COMP HAL module. |
| ****************************************************************************** |
| * @attention |
| * |
| * <h2><center>© COPYRIGHT(c) 2016 STMicroelectronics</center></h2> |
| * |
| * Redistribution and use in source and binary forms, with or without modification, |
| * are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright notice, |
| * this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright notice, |
| * this list of conditions and the following disclaimer in the documentation |
| * and/or other materials provided with the distribution. |
| * 3. Neither the name of STMicroelectronics nor the names of its contributors |
| * may be used to endorse or promote products derived from this software |
| * without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE |
| * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE |
| * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL |
| * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR |
| * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER |
| * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, |
| * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE |
| * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. |
| * |
| ****************************************************************************** |
| */ |
| |
| /* Define to prevent recursive inclusion -------------------------------------*/ |
| #ifndef __STM32F3xx_HAL_COMP_H |
| #define __STM32F3xx_HAL_COMP_H |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /* Includes ------------------------------------------------------------------*/ |
| #include "stm32f3xx_hal_def.h" |
| |
| /** @addtogroup STM32F3xx_HAL_Driver |
| * @{ |
| */ |
| |
| /** @addtogroup COMP |
| * @{ |
| */ |
| |
| /* Exported types ------------------------------------------------------------*/ |
| /** @defgroup COMP_Exported_Types COMP Exported Types |
| * @{ |
| */ |
| /** |
| * @brief COMP Init structure definition |
| */ |
| typedef struct |
| { |
| |
| uint32_t InvertingInput; /*!< Selects the inverting input of the comparator. |
| This parameter can be a value of @ref COMPEx_InvertingInput */ |
| |
| uint32_t NonInvertingInput; /*!< Selects the non inverting input of the comparator. |
| This parameter can be a value of @ref COMPEx_NonInvertingInput |
| Note: Only available on STM32F302xB/xC, STM32F303xB/xC and STM32F358xx devices */ |
| |
| uint32_t Output; /*!< Selects the output redirection of the comparator. |
| This parameter can be a value of @ref COMPEx_Output */ |
| |
| uint32_t OutputPol; /*!< Selects the output polarity of the comparator. |
| This parameter can be a value of @ref COMP_OutputPolarity */ |
| |
| uint32_t Hysteresis; /*!< Selects the hysteresis voltage of the comparator. |
| This parameter can be a value of @ref COMPEx_Hysteresis |
| Note: Only available on STM32F302xB/xC, STM32F303xB/xC, STM32F373xB/xC, STM32F358xx and STM32F378xx devices */ |
| |
| uint32_t BlankingSrce; /*!< Selects the output blanking source of the comparator. |
| This parameter can be a value of @ref COMPEx_BlankingSrce |
| Note: Not available on STM32F373xB/C and STM32F378xx devices */ |
| |
| uint32_t Mode; /*!< Selects the operating consumption mode of the comparator |
| to adjust the speed/consumption. |
| This parameter can be a value of @ref COMPEx_Mode |
| Note: Not available on STM32F301x6/x8, STM32F302x6/x8, STM32F334x6/x8, STM32F318xx and STM32F328xx devices */ |
| |
| uint32_t WindowMode; /*!< Selects the window mode of the comparator X (X=2U, 4 or 6 if available). |
| This parameter can be a value of @ref COMPEx_WindowMode */ |
| |
| uint32_t TriggerMode; /*!< Selects the trigger mode of the comparator (interrupt mode). |
| This parameter can be a value of @ref COMP_TriggerMode */ |
| |
| }COMP_InitTypeDef; |
| |
| /** |
| * @brief HAL State structures definition |
| */ |
| typedef enum |
| { |
| HAL_COMP_STATE_RESET = 0x00U, /*!< COMP not yet initialized or disabled */ |
| HAL_COMP_STATE_READY = 0x01U, /*!< COMP initialized and ready for use */ |
| HAL_COMP_STATE_READY_LOCKED = 0x11U, /*!< COMP initialized but the configuration is locked */ |
| HAL_COMP_STATE_BUSY = 0x02U, /*!< COMP is running */ |
| HAL_COMP_STATE_BUSY_LOCKED = 0x12 /*!< COMP is running and the configuration is locked */ |
| }HAL_COMP_StateTypeDef; |
| |
| /** |
| * @brief COMP Handle Structure definition |
| */ |
| typedef struct |
| { |
| COMP_TypeDef *Instance; /*!< Register base address */ |
| COMP_InitTypeDef Init; /*!< COMP required parameters */ |
| HAL_LockTypeDef Lock; /*!< Locking object */ |
| __IO HAL_COMP_StateTypeDef State; /*!< COMP communication state */ |
| }COMP_HandleTypeDef; |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported constants --------------------------------------------------------*/ |
| /** @defgroup COMP_Exported_Constants COMP Exported Constants |
| * @{ |
| */ |
| |
| /** @defgroup COMP_OutputPolarity COMP Output Polarity |
| * @{ |
| */ |
| #define COMP_OUTPUTPOL_NONINVERTED (0x00000000U) /*!< COMP output on GPIO isn't inverted */ |
| #define COMP_OUTPUTPOL_INVERTED COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup COMP_OutputLevel COMP Output Level |
| * @{ |
| */ |
| /* When output polarity is not inverted, comparator output is low when |
| the non-inverting input is at a lower voltage than the inverting input*/ |
| #define COMP_OUTPUTLEVEL_LOW (0x00000000U) |
| /* When output polarity is not inverted, comparator output is high when |
| the non-inverting input is at a higher voltage than the inverting input */ |
| #define COMP_OUTPUTLEVEL_HIGH COMP_CSR_COMPxOUT |
| /** |
| * @} |
| */ |
| |
| /** @defgroup COMP_TriggerMode COMP Trigger Mode |
| * @{ |
| */ |
| #define COMP_TRIGGERMODE_NONE (0x00000000U) /*!< No External Interrupt trigger detection */ |
| #define COMP_TRIGGERMODE_IT_RISING (0x00000001U) /*!< External Interrupt Mode with Rising edge trigger detection */ |
| #define COMP_TRIGGERMODE_IT_FALLING (0x00000002U) /*!< External Interrupt Mode with Falling edge trigger detection */ |
| #define COMP_TRIGGERMODE_IT_RISING_FALLING (0x00000003U) /*!< External Interrupt Mode with Rising/Falling edge trigger detection */ |
| #define COMP_TRIGGERMODE_EVENT_RISING (0x00000010U) /*!< Event Mode with Rising edge trigger detection */ |
| #define COMP_TRIGGERMODE_EVENT_FALLING (0x00000020U) /*!< Event Mode with Falling edge trigger detection */ |
| #define COMP_TRIGGERMODE_EVENT_RISING_FALLING (0x00000030U) /*!< Event Mode with Rising/Falling edge trigger detection */ |
| /** |
| * @} |
| */ |
| |
| /** @defgroup COMP_State_Lock COMP State Lock |
| * @{ |
| */ |
| #define COMP_STATE_BIT_LOCK (0x00000010U) /* Lock bit in COMP handle state */ |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Exported macros -----------------------------------------------------------*/ |
| /** @defgroup COMP_Exported_Macros COMP Exported Macros |
| * @{ |
| */ |
| |
| /** @brief Reset COMP handle state. |
| * @param __HANDLE__ COMP handle. |
| * @retval None |
| */ |
| #define __HAL_COMP_RESET_HANDLE_STATE(__HANDLE__) ((__HANDLE__)->State = HAL_COMP_STATE_RESET) |
| /** |
| * @} |
| */ |
| |
| /* Include COMP HAL Extended module */ |
| #include "stm32f3xx_hal_comp_ex.h" |
| |
| /* Exported functions --------------------------------------------------------*/ |
| /** @addtogroup COMP_Exported_Functions |
| * @{ |
| */ |
| /** @addtogroup COMP_Exported_Functions_Group1 |
| * @{ |
| */ |
| /* Initialization and de-initialization functions ****************************/ |
| HAL_StatusTypeDef HAL_COMP_Init(COMP_HandleTypeDef *hcomp); |
| HAL_StatusTypeDef HAL_COMP_DeInit (COMP_HandleTypeDef *hcomp); |
| void HAL_COMP_MspInit(COMP_HandleTypeDef *hcomp); |
| void HAL_COMP_MspDeInit(COMP_HandleTypeDef *hcomp); |
| /** |
| * @} |
| */ |
| |
| /* IO operation functions *****************************************************/ |
| /** @addtogroup COMP_Exported_Functions_Group2 |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_COMP_Start(COMP_HandleTypeDef *hcomp); |
| HAL_StatusTypeDef HAL_COMP_Stop(COMP_HandleTypeDef *hcomp); |
| HAL_StatusTypeDef HAL_COMP_Start_IT(COMP_HandleTypeDef *hcomp); |
| HAL_StatusTypeDef HAL_COMP_Stop_IT(COMP_HandleTypeDef *hcomp); |
| void HAL_COMP_IRQHandler(COMP_HandleTypeDef *hcomp); |
| /* Callback in Interrupt mode */ |
| void HAL_COMP_TriggerCallback(COMP_HandleTypeDef *hcomp); |
| /** |
| * @} |
| */ |
| |
| /* Peripheral Control functions ************************************************/ |
| /** @addtogroup COMP_Exported_Functions_Group3 |
| * @{ |
| */ |
| HAL_StatusTypeDef HAL_COMP_Lock(COMP_HandleTypeDef *hcomp); |
| uint32_t HAL_COMP_GetOutputLevel(COMP_HandleTypeDef *hcomp); |
| /** |
| * @} |
| */ |
| |
| /* Peripheral State functions **************************************************/ |
| /** @addtogroup COMP_Exported_Functions_Group4 |
| * @{ |
| */ |
| HAL_COMP_StateTypeDef HAL_COMP_GetState(COMP_HandleTypeDef *hcomp); |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /* Private macros ------------------------------------------------------------*/ |
| /** @defgroup COMP_Private_Macros COMP Private Macros |
| * @{ |
| */ |
| |
| /** @defgroup COMP_IS_COMP_Definitions COMP Private macros to check input parameters |
| * @{ |
| */ |
| |
| #define IS_COMP_OUTPUTPOL(__POL__) (((__POL__) == COMP_OUTPUTPOL_NONINVERTED) || \ |
| ((__POL__) == COMP_OUTPUTPOL_INVERTED)) |
| |
| #define IS_COMP_TRIGGERMODE(__MODE__) (((__MODE__) == COMP_TRIGGERMODE_NONE) || \ |
| ((__MODE__) == COMP_TRIGGERMODE_IT_RISING) || \ |
| ((__MODE__) == COMP_TRIGGERMODE_IT_FALLING) || \ |
| ((__MODE__) == COMP_TRIGGERMODE_IT_RISING_FALLING) || \ |
| ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING) || \ |
| ((__MODE__) == COMP_TRIGGERMODE_EVENT_FALLING) || \ |
| ((__MODE__) == COMP_TRIGGERMODE_EVENT_RISING_FALLING)) |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| /** |
| * @} |
| */ |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| |
| #endif /* __STM32F3xx_HAL_COMP_H */ |
| |
| /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |