/** | |
****************************************************************************** | |
* @file stm32f4xx_hal_rtc_ex.h | |
* @author MCD Application Team | |
* @version V1.7.1 | |
* @date 14-April-2017 | |
* @brief Header file of RTC HAL Extension module. | |
****************************************************************************** | |
* @attention | |
* | |
* <h2><center>© COPYRIGHT(c) 2017 STMicroelectronics</center></h2> | |
* | |
* Redistribution and use in source and binary forms, with or without modification, | |
* are permitted provided that the following conditions are met: | |
* 1. Redistributions of source code must retain the above copyright notice, | |
* this list of conditions and the following disclaimer. | |
* 2. Redistributions in binary form must reproduce the above copyright notice, | |
* this list of conditions and the following disclaimer in the documentation | |
* and/or other materials provided with the distribution. | |
* 3. Neither the name of STMicroelectronics nor the names of its contributors | |
* may be used to endorse or promote products derived from this software | |
* without specific prior written permission. | |
* | |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" | |
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE | |
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE | |
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE | |
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL | |
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR | |
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER | |
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, | |
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE | |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. | |
* | |
****************************************************************************** | |
*/ | |
/* Define to prevent recursive inclusion -------------------------------------*/ | |
#ifndef __STM32F4xx_HAL_RTC_EX_H | |
#define __STM32F4xx_HAL_RTC_EX_H | |
#ifdef __cplusplus | |
extern "C" { | |
#endif | |
/* Includes ------------------------------------------------------------------*/ | |
#include "stm32f4xx_hal_def.h" | |
/** @addtogroup STM32F4xx_HAL_Driver | |
* @{ | |
*/ | |
/** @addtogroup RTCEx | |
* @{ | |
*/ | |
/* Exported types ------------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Types RTCEx Exported Types | |
* @{ | |
*/ | |
/** | |
* @brief RTC Tamper structure definition | |
*/ | |
typedef struct | |
{ | |
uint32_t Tamper; /*!< Specifies the Tamper Pin. | |
This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions */ | |
uint32_t PinSelection; /*!< Specifies the Tamper Pin. | |
This parameter can be a value of @ref RTCEx_Tamper_Pins_Selection */ | |
uint32_t Trigger; /*!< Specifies the Tamper Trigger. | |
This parameter can be a value of @ref RTCEx_Tamper_Trigger_Definitions */ | |
uint32_t Filter; /*!< Specifies the RTC Filter Tamper. | |
This parameter can be a value of @ref RTCEx_Tamper_Filter_Definitions */ | |
uint32_t SamplingFrequency; /*!< Specifies the sampling frequency. | |
This parameter can be a value of @ref RTCEx_Tamper_Sampling_Frequencies_Definitions */ | |
uint32_t PrechargeDuration; /*!< Specifies the Precharge Duration . | |
This parameter can be a value of @ref RTCEx_Tamper_Pin_Precharge_Duration_Definitions */ | |
uint32_t TamperPullUp; /*!< Specifies the Tamper PullUp . | |
This parameter can be a value of @ref RTCEx_Tamper_Pull_UP_Definitions */ | |
uint32_t TimeStampOnTamperDetection; /*!< Specifies the TimeStampOnTamperDetection. | |
This parameter can be a value of @ref RTCEx_Tamper_TimeStampOnTamperDetection_Definitions */ | |
}RTC_TamperTypeDef; | |
/** | |
* @} | |
*/ | |
/* Exported constants --------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Constants RTCEx Exported Constants | |
* @{ | |
*/ | |
/** @defgroup RTCEx_Backup_Registers_Definitions RTC Backup Registers Definitions | |
* @{ | |
*/ | |
#define RTC_BKP_DR0 0x00000000U | |
#define RTC_BKP_DR1 0x00000001U | |
#define RTC_BKP_DR2 0x00000002U | |
#define RTC_BKP_DR3 0x00000003U | |
#define RTC_BKP_DR4 0x00000004U | |
#define RTC_BKP_DR5 0x00000005U | |
#define RTC_BKP_DR6 0x00000006U | |
#define RTC_BKP_DR7 0x00000007U | |
#define RTC_BKP_DR8 0x00000008U | |
#define RTC_BKP_DR9 0x00000009U | |
#define RTC_BKP_DR10 0x0000000AU | |
#define RTC_BKP_DR11 0x0000000BU | |
#define RTC_BKP_DR12 0x0000000CU | |
#define RTC_BKP_DR13 0x0000000DU | |
#define RTC_BKP_DR14 0x0000000EU | |
#define RTC_BKP_DR15 0x0000000FU | |
#define RTC_BKP_DR16 0x00000010U | |
#define RTC_BKP_DR17 0x00000011U | |
#define RTC_BKP_DR18 0x00000012U | |
#define RTC_BKP_DR19 0x00000013U | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Time_Stamp_Edges_definitions RTC TimeStamp Edges Definitions | |
* @{ | |
*/ | |
#define RTC_TIMESTAMPEDGE_RISING 0x00000000U | |
#define RTC_TIMESTAMPEDGE_FALLING 0x00000008U | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Pins_Definitions RTC Tamper Pins Definitions | |
* @{ | |
*/ | |
#define RTC_TAMPER_1 RTC_TAFCR_TAMP1E | |
#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx) | |
#define RTC_TAMPER_2 RTC_TAFCR_TAMP2E | |
#endif | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Pins_Selection RTC tamper Pins Selection | |
* @{ | |
*/ | |
#define RTC_TAMPERPIN_DEFAULT 0x00000000U | |
#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx) | |
#define RTC_TAMPERPIN_POS1 0x00010000U | |
#endif | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_TimeStamp_Pin_Selection RTC TimeStamp Pins Selection | |
* @{ | |
*/ | |
#define RTC_TIMESTAMPPIN_DEFAULT 0x00000000U | |
#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx) | |
#define RTC_TIMESTAMPPIN_POS1 0x00020000U | |
#endif | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Trigger_Definitions RTC Tamper Triggers Definitions | |
* @{ | |
*/ | |
#define RTC_TAMPERTRIGGER_RISINGEDGE 0x00000000U | |
#define RTC_TAMPERTRIGGER_FALLINGEDGE 0x00000002U | |
#define RTC_TAMPERTRIGGER_LOWLEVEL RTC_TAMPERTRIGGER_RISINGEDGE | |
#define RTC_TAMPERTRIGGER_HIGHLEVEL RTC_TAMPERTRIGGER_FALLINGEDGE | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Filter_Definitions RTC Tamper Filter Definitions | |
* @{ | |
*/ | |
#define RTC_TAMPERFILTER_DISABLE 0x00000000U /*!< Tamper filter is disabled */ | |
#define RTC_TAMPERFILTER_2SAMPLE 0x00000800U /*!< Tamper is activated after 2 | |
consecutive samples at the active level */ | |
#define RTC_TAMPERFILTER_4SAMPLE 0x00001000U /*!< Tamper is activated after 4 | |
consecutive samples at the active level */ | |
#define RTC_TAMPERFILTER_8SAMPLE 0x00001800U /*!< Tamper is activated after 8 | |
consecutive samples at the active level. */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Sampling_Frequencies_Definitions RTC Tamper Sampling Frequencies Definitions | |
* @{ | |
*/ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768 0x00000000U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 32768 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384 0x00000100U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 16384 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192 0x00000200U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 8192 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096 0x00000300U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 4096 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048 0x00000400U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 2048 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024 0x00000500U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 1024 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512 0x00000600U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 512 */ | |
#define RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256 0x00000700U /*!< Each of the tamper inputs are sampled | |
with a frequency = RTCCLK / 256 */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Pin_Precharge_Duration_Definitions RTC Tamper Pin Precharge Duration Definitions | |
* @{ | |
*/ | |
#define RTC_TAMPERPRECHARGEDURATION_1RTCCLK 0x00000000U /*!< Tamper pins are pre-charged before | |
sampling during 1 RTCCLK cycle */ | |
#define RTC_TAMPERPRECHARGEDURATION_2RTCCLK 0x00002000U /*!< Tamper pins are pre-charged before | |
sampling during 2 RTCCLK cycles */ | |
#define RTC_TAMPERPRECHARGEDURATION_4RTCCLK 0x00004000U /*!< Tamper pins are pre-charged before | |
sampling during 4 RTCCLK cycles */ | |
#define RTC_TAMPERPRECHARGEDURATION_8RTCCLK 0x00006000U /*!< Tamper pins are pre-charged before | |
sampling during 8 RTCCLK cycles */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_TimeStampOnTamperDetection_Definitions RTC Tamper TimeStamp On Tamper Detection Definitions | |
* @{ | |
*/ | |
#define RTC_TIMESTAMPONTAMPERDETECTION_ENABLE ((uint32_t)RTC_TAFCR_TAMPTS) /*!< TimeStamp on Tamper Detection event saved */ | |
#define RTC_TIMESTAMPONTAMPERDETECTION_DISABLE 0x00000000U /*!< TimeStamp on Tamper Detection event is not saved */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Tamper_Pull_UP_Definitions RTC Tamper Pull Up Definitions | |
* @{ | |
*/ | |
#define RTC_TAMPER_PULLUP_ENABLE 0x00000000U /*!< TimeStamp on Tamper Detection event saved */ | |
#define RTC_TAMPER_PULLUP_DISABLE ((uint32_t)RTC_TAFCR_TAMPPUDIS) /*!< TimeStamp on Tamper Detection event is not saved */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Wakeup_Timer_Definitions RTC Wake-up Timer Definitions | |
* @{ | |
*/ | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 0x00000000U | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 0x00000001U | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 0x00000002U | |
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 0x00000003U | |
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS 0x00000004U | |
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS 0x00000006U | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Digital_Calibration_Definitions RTC Digital Calib Definitions | |
* @{ | |
*/ | |
#define RTC_CALIBSIGN_POSITIVE 0x00000000U | |
#define RTC_CALIBSIGN_NEGATIVE 0x00000080U | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Smooth_calib_period_Definitions RTC Smooth Calib Period Definitions | |
* @{ | |
*/ | |
#define RTC_SMOOTHCALIB_PERIOD_32SEC 0x00000000U /*!< If RTCCLK = 32768 Hz, Smooth calibration | |
period is 32s, else 2exp20 RTCCLK seconds */ | |
#define RTC_SMOOTHCALIB_PERIOD_16SEC 0x00002000U /*!< If RTCCLK = 32768 Hz, Smooth calibration | |
period is 16s, else 2exp19 RTCCLK seconds */ | |
#define RTC_SMOOTHCALIB_PERIOD_8SEC 0x00004000U /*!< If RTCCLK = 32768 Hz, Smooth calibration | |
period is 8s, else 2exp18 RTCCLK seconds */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Smooth_calib_Plus_pulses_Definitions RTC Smooth Calib Plus Pulses Definitions | |
* @{ | |
*/ | |
#define RTC_SMOOTHCALIB_PLUSPULSES_SET 0x00008000U /*!< The number of RTCCLK pulses added | |
during a X -second window = Y - CALM[8:0] | |
with Y = 512, 256, 128 when X = 32, 16, 8 */ | |
#define RTC_SMOOTHCALIB_PLUSPULSES_RESET 0x00000000U /*!< The number of RTCCLK pulses subbstited | |
during a 32-second window = CALM[8:0] */ | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Add_1_Second_Parameter_Definitions RTC Add 1 Second Parameter Definitions | |
* @{ | |
*/ | |
#define RTC_SHIFTADD1S_RESET 0x00000000U | |
#define RTC_SHIFTADD1S_SET 0x80000000U | |
/** | |
* @} | |
*/ | |
/** @defgroup RTCEx_Calib_Output_selection_Definitions RTC Calib Output Selection Definitions | |
* @{ | |
*/ | |
#define RTC_CALIBOUTPUT_512HZ 0x00000000U | |
#define RTC_CALIBOUTPUT_1HZ 0x00080000U | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported macro ------------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Macros RTCEx Exported Macros | |
* @{ | |
*/ | |
/* ---------------------------------WAKEUPTIMER---------------------------------*/ | |
/** @defgroup RTCEx_WakeUp_Timer RTC WakeUp Timer | |
* @{ | |
*/ | |
/** | |
* @brief Enable the RTC WakeUp Timer peripheral. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_WUTE)) | |
/** | |
* @brief Disable the RTC Wake-up Timer peripheral. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_WUTE)) | |
/** | |
* @brief Enable the RTC WakeUpTimer interrupt. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer A interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) | |
/** | |
* @brief Disable the RTC WakeUpTimer interrupt. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt sources to be enabled or disabled. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer A interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) | |
/** | |
* @brief Check whether the specified RTC WakeUpTimer interrupt has occurred or not. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC WakeUpTimer interrupt to check. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer A interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
/** | |
* @brief Check whether the specified RTC Wake Up timer interrupt has been enabled or not. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC Wake Up timer interrupt sources to check. | |
* This parameter can be: | |
* @arg RTC_IT_WUT: WakeUpTimer interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
/** | |
* @brief Get the selected RTC WakeUpTimer's flag status. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __FLAG__: specifies the RTC WakeUpTimer Flag to check. | |
* This parameter can be: | |
* @arg RTC_FLAG_WUTF | |
* @arg RTC_FLAG_WUTWF | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
/** | |
* @brief Clear the RTC Wake Up timer's pending flags. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. | |
* This parameter can be: | |
* @arg RTC_FLAG_WUTF | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
/** | |
* @brief Enable interrupt on the RTC Wake-up Timer associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable interrupt on the RTC Wake-up Timer associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable event on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable event on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable falling edge trigger on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable falling edge trigger on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable rising edge trigger on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Disable rising edge trigger on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_WAKEUPTIMER_EVENT)) | |
/** | |
* @brief Enable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_RISING_EDGE();\ | |
__HAL_RTC_WAKEUPTIMER_EXTI_ENABLE_FALLING_EDGE();\ | |
} while(0U) | |
/** | |
* @brief Disable rising & falling edge trigger on the RTC Wake-up Timer associated Exti line. | |
* This parameter can be: | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_RISING_EDGE();\ | |
__HAL_RTC_WAKEUPTIMER_EXTI_DISABLE_FALLING_EDGE();\ | |
} while(0U) | |
/** | |
* @brief Check whether the RTC Wake-up Timer associated Exti line interrupt flag is set or not. | |
* @retval Line Status. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Clear the RTC Wake-up Timer associated Exti line flag. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @brief Generate a Software interrupt on the RTC Wake-up Timer associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_WAKEUPTIMER_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT) | |
/** | |
* @} | |
*/ | |
/* ---------------------------------TIMESTAMP---------------------------------*/ | |
/** @defgroup RTCEx_Timestamp RTC Timestamp | |
* @{ | |
*/ | |
/** | |
* @brief Enable the RTC TimeStamp peripheral. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_TSE)) | |
/** | |
* @brief Disable the RTC TimeStamp peripheral. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_TSE)) | |
/** | |
* @brief Enable the RTC TimeStamp interrupt. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_ENABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR |= (__INTERRUPT__)) | |
/** | |
* @brief Disable the RTC TimeStamp interrupt. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt sources to be enabled or disabled. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_DISABLE_IT(__HANDLE__, __INTERRUPT__) ((__HANDLE__)->Instance->CR &= ~(__INTERRUPT__)) | |
/** | |
* @brief Check whether the specified RTC TimeStamp interrupt has occurred or not. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC TimeStamp interrupt to check. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
/** | |
* @brief Check whether the specified RTC Time Stamp interrupt has been enabled or not. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC Time Stamp interrupt source to check. | |
* This parameter can be: | |
* @arg RTC_IT_TS: TimeStamp interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->CR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
/** | |
* @brief Get the selected RTC TimeStamp's flag status. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __FLAG__: specifies the RTC TimeStamp flag to check. | |
* This parameter can be: | |
* @arg RTC_FLAG_TSF | |
* @arg RTC_FLAG_TSOVF | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
/** | |
* @brief Clear the RTC Time Stamp's pending flags. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __FLAG__: specifies the RTC Alarm Flag sources to be enabled or disabled. | |
* This parameter can be: | |
* @arg RTC_FLAG_TSF | |
* @retval None | |
*/ | |
#define __HAL_RTC_TIMESTAMP_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
/** | |
* @} | |
*/ | |
/* ---------------------------------TAMPER------------------------------------*/ | |
/** @defgroup RTCEx_Tamper RTC Tamper | |
* @{ | |
*/ | |
/** | |
* @brief Enable the RTC Tamper1 input detection. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER1_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP1E)) | |
/** | |
* @brief Disable the RTC Tamper1 input detection. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER1_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP1E)) | |
#if !defined(STM32F412Zx) && !defined(STM32F412Vx) && !defined(STM32F412Rx) && !defined(STM32F412Cx) && !defined(STM32F413xx) && !defined(STM32F423xx) | |
/** | |
* @brief Enable the RTC Tamper2 input detection. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER2_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR |= (RTC_TAFCR_TAMP2E)) | |
/** | |
* @brief Disable the RTC Tamper2 input detection. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER2_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->TAFCR &= ~(RTC_TAFCR_TAMP2E)) | |
#endif | |
/** | |
* @brief Check whether the specified RTC Tamper interrupt has occurred or not. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC Tamper interrupt to check. | |
* This parameter can be: | |
* @arg RTC_IT_TAMP1 | |
* @arg RTC_IT_TAMP2 | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_GET_IT(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->ISR) & ((__INTERRUPT__)>> 4U)) != RESET)? SET : RESET) | |
/** | |
* @brief Check whether the specified RTC Tamper interrupt has been enabled or not. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __INTERRUPT__: specifies the RTC Tamper interrupt source to check. | |
* This parameter can be: | |
* @arg RTC_IT_TAMP: Tamper interrupt | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_GET_IT_SOURCE(__HANDLE__, __INTERRUPT__) (((((__HANDLE__)->Instance->TAFCR) & (__INTERRUPT__)) != RESET) ? SET : RESET) | |
/** | |
* @brief Get the selected RTC Tamper's flag status. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __FLAG__: specifies the RTC Tamper Flag sources to be enabled or disabled. | |
* This parameter can be: | |
* @arg RTC_FLAG_TAMP1F | |
* @arg RTC_FLAG_TAMP2F | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
/** | |
* @brief Clear the RTC Tamper's pending flags. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __FLAG__: specifies the RTC Tamper Flag to clear. | |
* This parameter can be: | |
* @arg RTC_FLAG_TAMP1F | |
* @arg RTC_FLAG_TAMP2F | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_CLEAR_FLAG(__HANDLE__, __FLAG__) ((__HANDLE__)->Instance->ISR) = (~((__FLAG__) | RTC_ISR_INIT)|((__HANDLE__)->Instance->ISR & RTC_ISR_INIT)) | |
/** | |
* @} | |
*/ | |
/* --------------------------TAMPER/TIMESTAMP---------------------------------*/ | |
/** @defgroup RTCEx_Tamper_Timestamp EXTI RTC Tamper Timestamp EXTI | |
* @{ | |
*/ | |
/** | |
* @brief Enable interrupt on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_IT() (EXTI->IMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable interrupt on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_IT() (EXTI->IMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable event on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_EVENT() (EXTI->EMR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable event on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_EVENT() (EXTI->EMR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE() (EXTI->FTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE() (EXTI->FTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE() (EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Disable rising edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE() (EXTI->RTSR &= ~(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT)) | |
/** | |
* @brief Enable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_RISING_EDGE();\ | |
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_ENABLE_FALLING_EDGE(); \ | |
} while(0U) | |
/** | |
* @brief Disable rising & falling edge trigger on the RTC Tamper and Timestamp associated Exti line. | |
* This parameter can be: | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_FALLING_EDGE() do { __HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_RISING_EDGE();\ | |
__HAL_RTC_TAMPER_TIMESTAMP_EXTI_DISABLE_FALLING_EDGE();\ | |
} while(0U) | |
/** | |
* @brief Check whether the RTC Tamper and Timestamp associated Exti line interrupt flag is set or not. | |
* @retval Line Status. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GET_FLAG() (EXTI->PR & RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Clear the RTC Tamper and Timestamp associated Exti line flag. | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_CLEAR_FLAG() (EXTI->PR = RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @brief Generate a Software interrupt on the RTC Tamper and Timestamp associated Exti line | |
* @retval None. | |
*/ | |
#define __HAL_RTC_TAMPER_TIMESTAMP_EXTI_GENERATE_SWIT() (EXTI->SWIER |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT) | |
/** | |
* @} | |
*/ | |
/* ------------------------------Calibration----------------------------------*/ | |
/** @defgroup RTCEx_Calibration RTC Calibration | |
* @{ | |
*/ | |
/** | |
* @brief Enable the Coarse calibration process. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_COARSE_CALIB_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_DCE)) | |
/** | |
* @brief Disable the Coarse calibration process. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_COARSE_CALIB_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_DCE)) | |
/** | |
* @brief Enable the RTC calibration output. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_COE)) | |
/** | |
* @brief Disable the calibration output. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_COE)) | |
/** | |
* @brief Enable the clock reference detection. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CLOCKREF_DETECTION_ENABLE(__HANDLE__) ((__HANDLE__)->Instance->CR |= (RTC_CR_REFCKON)) | |
/** | |
* @brief Disable the clock reference detection. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @retval None | |
*/ | |
#define __HAL_RTC_CLOCKREF_DETECTION_DISABLE(__HANDLE__) ((__HANDLE__)->Instance->CR &= ~(RTC_CR_REFCKON)) | |
/** | |
* @brief Get the selected RTC shift operation's flag status. | |
* @param __HANDLE__: specifies the RTC handle. | |
* @param __FLAG__: specifies the RTC shift operation Flag is pending or not. | |
* This parameter can be: | |
* @arg RTC_FLAG_SHPF | |
* @retval None | |
*/ | |
#define __HAL_RTC_SHIFT_GET_FLAG(__HANDLE__, __FLAG__) (((((__HANDLE__)->Instance->ISR) & (__FLAG__)) != RESET)? SET : RESET) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Exported functions --------------------------------------------------------*/ | |
/** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions | |
* @{ | |
*/ | |
/** @addtogroup RTCEx_Exported_Functions_Group1 | |
* @{ | |
*/ | |
/* RTC TimeStamp and Tamper functions *****************************************/ | |
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); | |
HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge, uint32_t RTC_TimeStampPin); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTimeStamp, RTC_DateTypeDef *sTimeStampDate, uint32_t Format); | |
HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | |
HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper); | |
void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
/** | |
* @} | |
*/ | |
/** @addtogroup RTCEx_Exported_Functions_Group2 | |
* @{ | |
*/ | |
/* RTC Wake-up functions ******************************************************/ | |
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); | |
HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock); | |
uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc); | |
uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc); | |
void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
/** | |
* @} | |
*/ | |
/** @addtogroup RTCEx_Exported_Functions_Group3 | |
* @{ | |
*/ | |
/* Extension Control functions ************************************************/ | |
void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data); | |
uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister); | |
HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef *hrtc, uint32_t CalibSign, uint32_t Value); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef *hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue); | |
HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef *hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS); | |
HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef *hrtc, uint32_t CalibOutput); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef *hrtc); | |
/** | |
* @} | |
*/ | |
/** @addtogroup RTCEx_Exported_Functions_Group4 | |
* @{ | |
*/ | |
/* Extension RTC features functions *******************************************/ | |
void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc); | |
HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout); | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/* Private types -------------------------------------------------------------*/ | |
/* Private variables ---------------------------------------------------------*/ | |
/* Private constants ---------------------------------------------------------*/ | |
/** @defgroup RTCEx_Private_Constants RTCEx Private Constants | |
* @{ | |
*/ | |
#define RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT ((uint32_t)EXTI_IMR_MR21) /*!< External interrupt line 21 Connected to the RTC Tamper and Time Stamp events */ | |
#define RTC_EXTI_LINE_WAKEUPTIMER_EVENT ((uint32_t)EXTI_IMR_MR22) /*!< External interrupt line 22 Connected to the RTC Wake-up event */ | |
/** | |
* @} | |
*/ | |
/* Private macros ------------------------------------------------------------*/ | |
/** @defgroup RTCEx_Private_Macros RTCEx Private Macros | |
* @{ | |
*/ | |
/** @defgroup RTCEx_IS_RTC_Definitions Private macros to check input parameters | |
* @{ | |
*/ | |
#define IS_RTC_BKP(BKP) (((BKP) == RTC_BKP_DR0) || \ | |
((BKP) == RTC_BKP_DR1) || \ | |
((BKP) == RTC_BKP_DR2) || \ | |
((BKP) == RTC_BKP_DR3) || \ | |
((BKP) == RTC_BKP_DR4) || \ | |
((BKP) == RTC_BKP_DR5) || \ | |
((BKP) == RTC_BKP_DR6) || \ | |
((BKP) == RTC_BKP_DR7) || \ | |
((BKP) == RTC_BKP_DR8) || \ | |
((BKP) == RTC_BKP_DR9) || \ | |
((BKP) == RTC_BKP_DR10) || \ | |
((BKP) == RTC_BKP_DR11) || \ | |
((BKP) == RTC_BKP_DR12) || \ | |
((BKP) == RTC_BKP_DR13) || \ | |
((BKP) == RTC_BKP_DR14) || \ | |
((BKP) == RTC_BKP_DR15) || \ | |
((BKP) == RTC_BKP_DR16) || \ | |
((BKP) == RTC_BKP_DR17) || \ | |
((BKP) == RTC_BKP_DR18) || \ | |
((BKP) == RTC_BKP_DR19)) | |
#define IS_TIMESTAMP_EDGE(EDGE) (((EDGE) == RTC_TIMESTAMPEDGE_RISING) || \ | |
((EDGE) == RTC_TIMESTAMPEDGE_FALLING)) | |
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) | |
#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E ))) == 0x00U) && ((TAMPER) != (uint32_t)RESET)) | |
#else | |
#define IS_RTC_TAMPER(TAMPER) ((((TAMPER) & ((uint32_t)!(RTC_TAFCR_TAMP1E | RTC_TAFCR_TAMP2E))) == 0x00U) && ((TAMPER) != (uint32_t)RESET)) | |
#endif | |
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) | |
#define IS_RTC_TAMPER_PIN(PIN) ((PIN) == RTC_TAMPERPIN_DEFAULT) | |
#else | |
#define IS_RTC_TAMPER_PIN(PIN) (((PIN) == RTC_TAMPERPIN_DEFAULT) || \ | |
((PIN) == RTC_TAMPERPIN_POS1)) | |
#endif | |
#if defined(STM32F412Zx) || defined(STM32F412Vx) || defined(STM32F412Rx) || defined(STM32F412Cx) || defined(STM32F413xx) || defined(STM32F423xx) | |
#define IS_RTC_TIMESTAMP_PIN(PIN) ((PIN) == RTC_TIMESTAMPPIN_DEFAULT) | |
#else | |
#define IS_RTC_TIMESTAMP_PIN(PIN) (((PIN) == RTC_TIMESTAMPPIN_DEFAULT) || \ | |
((PIN) == RTC_TIMESTAMPPIN_POS1)) | |
#endif | |
#define IS_RTC_TAMPER_TRIGGER(TRIGGER) (((TRIGGER) == RTC_TAMPERTRIGGER_RISINGEDGE) || \ | |
((TRIGGER) == RTC_TAMPERTRIGGER_FALLINGEDGE) || \ | |
((TRIGGER) == RTC_TAMPERTRIGGER_LOWLEVEL) || \ | |
((TRIGGER) == RTC_TAMPERTRIGGER_HIGHLEVEL)) | |
#define IS_RTC_TAMPER_FILTER(FILTER) (((FILTER) == RTC_TAMPERFILTER_DISABLE) || \ | |
((FILTER) == RTC_TAMPERFILTER_2SAMPLE) || \ | |
((FILTER) == RTC_TAMPERFILTER_4SAMPLE) || \ | |
((FILTER) == RTC_TAMPERFILTER_8SAMPLE)) | |
#define IS_RTC_TAMPER_SAMPLING_FREQ(FREQ) (((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV32768)|| \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV16384)|| \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV8192) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV4096) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV2048) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV1024) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV512) || \ | |
((FREQ) == RTC_TAMPERSAMPLINGFREQ_RTCCLK_DIV256)) | |
#define IS_RTC_TAMPER_PRECHARGE_DURATION(DURATION) (((DURATION) == RTC_TAMPERPRECHARGEDURATION_1RTCCLK) || \ | |
((DURATION) == RTC_TAMPERPRECHARGEDURATION_2RTCCLK) || \ | |
((DURATION) == RTC_TAMPERPRECHARGEDURATION_4RTCCLK) || \ | |
((DURATION) == RTC_TAMPERPRECHARGEDURATION_8RTCCLK)) | |
#define IS_RTC_TAMPER_TIMESTAMPONTAMPER_DETECTION(DETECTION) (((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_ENABLE) || \ | |
((DETECTION) == RTC_TIMESTAMPONTAMPERDETECTION_DISABLE)) | |
#define IS_RTC_TAMPER_PULLUP_STATE(STATE) (((STATE) == RTC_TAMPER_PULLUP_ENABLE) || \ | |
((STATE) == RTC_TAMPER_PULLUP_DISABLE)) | |
#define IS_RTC_WAKEUP_CLOCK(CLOCK) (((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV16) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV8) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV4) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_RTCCLK_DIV2) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_16BITS) || \ | |
((CLOCK) == RTC_WAKEUPCLOCK_CK_SPRE_17BITS)) | |
#define IS_RTC_WAKEUP_COUNTER(COUNTER) ((COUNTER) <= 0xFFFFU) | |
#define IS_RTC_CALIB_SIGN(SIGN) (((SIGN) == RTC_CALIBSIGN_POSITIVE) || \ | |
((SIGN) == RTC_CALIBSIGN_NEGATIVE)) | |
#define IS_RTC_CALIB_VALUE(VALUE) ((VALUE) < 0x20U) | |
#define IS_RTC_SMOOTH_CALIB_PERIOD(PERIOD) (((PERIOD) == RTC_SMOOTHCALIB_PERIOD_32SEC) || \ | |
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_16SEC) || \ | |
((PERIOD) == RTC_SMOOTHCALIB_PERIOD_8SEC)) | |
#define IS_RTC_SMOOTH_CALIB_PLUS(PLUS) (((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_SET) || \ | |
((PLUS) == RTC_SMOOTHCALIB_PLUSPULSES_RESET)) | |
#define IS_RTC_SMOOTH_CALIB_MINUS(VALUE) ((VALUE) <= 0x000001FFU) | |
#define IS_RTC_SHIFT_ADD1S(SEL) (((SEL) == RTC_SHIFTADD1S_RESET) || \ | |
((SEL) == RTC_SHIFTADD1S_SET)) | |
#define IS_RTC_SHIFT_SUBFS(FS) ((FS) <= 0x00007FFFU) | |
#define IS_RTC_CALIB_OUTPUT(OUTPUT) (((OUTPUT) == RTC_CALIBOUTPUT_512HZ) || \ | |
((OUTPUT) == RTC_CALIBOUTPUT_1HZ)) | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
/** | |
* @} | |
*/ | |
#ifdef __cplusplus | |
} | |
#endif | |
#endif /* __STM32F4xx_HAL_RTC_EX_H */ | |
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/ |