| /** @file |
| * @brief Modem receiver driver |
| * |
| * A modem receiver driver allowing application to handle all |
| * aspects of received protocol data. |
| */ |
| |
| /* |
| * Copyright (c) 2018 Foundries.io |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <kernel.h> |
| #include <init.h> |
| #include <drivers/uart.h> |
| |
| #include <logging/log.h> |
| |
| LOG_MODULE_REGISTER(mdm_receiver, CONFIG_MODEM_LOG_LEVEL); |
| |
| #include "modem_receiver.h" |
| |
| #define MAX_MDM_CTX CONFIG_MODEM_RECEIVER_MAX_CONTEXTS |
| #define MAX_READ_SIZE 128 |
| |
| static struct mdm_receiver_context *contexts[MAX_MDM_CTX]; |
| |
| /** |
| * @brief Finds receiver context which manages provided device. |
| * |
| * @param *dev: device used by the receiver context. |
| * |
| * @retval Receiver context or NULL. |
| */ |
| static struct mdm_receiver_context *context_from_dev(const struct device *dev) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_MDM_CTX; i++) { |
| if (contexts[i] && contexts[i]->uart_dev == dev) { |
| return contexts[i]; |
| } |
| } |
| |
| return NULL; |
| } |
| |
| /** |
| * @brief Persists receiver context if there is a free place. |
| * |
| * @note Amount of stored receiver contexts is determined by |
| * MAX_MDM_CTX. |
| * |
| * @param *ctx: receiver context to persist. |
| * |
| * @retval 0 if ok, < 0 if error. |
| */ |
| static int mdm_receiver_get(struct mdm_receiver_context *ctx) |
| { |
| int i; |
| |
| for (i = 0; i < MAX_MDM_CTX; i++) { |
| if (!contexts[i]) { |
| contexts[i] = ctx; |
| return 0; |
| } |
| } |
| |
| return -ENOMEM; |
| } |
| |
| /** |
| * @brief Drains UART. |
| * |
| * @note Discards remaining data. |
| * |
| * @param *ctx: receiver context. |
| * |
| * @retval None. |
| */ |
| static void mdm_receiver_flush(struct mdm_receiver_context *ctx) |
| { |
| uint8_t c; |
| |
| __ASSERT(ctx, "invalid ctx"); |
| __ASSERT(ctx->uart_dev, "invalid ctx device"); |
| |
| while (uart_fifo_read(ctx->uart_dev, &c, 1) > 0) { |
| continue; |
| } |
| } |
| |
| /** |
| * @brief Receiver UART interrupt handler. |
| * |
| * @note Fills contexts ring buffer with received data. |
| * When ring buffer is full the data is discarded. |
| * |
| * @param *uart_dev: uart device. |
| * |
| * @retval None. |
| */ |
| static void mdm_receiver_isr(const struct device *uart_dev, void *user_data) |
| { |
| struct mdm_receiver_context *ctx; |
| int rx, ret; |
| static uint8_t read_buf[MAX_READ_SIZE]; |
| |
| ARG_UNUSED(user_data); |
| |
| /* lookup the device */ |
| ctx = context_from_dev(uart_dev); |
| if (!ctx) { |
| return; |
| } |
| |
| /* get all of the data off UART as fast as we can */ |
| while (uart_irq_update(ctx->uart_dev) && |
| uart_irq_rx_ready(ctx->uart_dev)) { |
| rx = uart_fifo_read(ctx->uart_dev, read_buf, sizeof(read_buf)); |
| if (rx > 0) { |
| ret = ring_buf_put(&ctx->rx_rb, read_buf, rx); |
| if (ret != rx) { |
| LOG_ERR("Rx buffer doesn't have enough space. " |
| "Bytes pending: %d, written: %d", |
| rx, ret); |
| mdm_receiver_flush(ctx); |
| k_sem_give(&ctx->rx_sem); |
| break; |
| } |
| k_sem_give(&ctx->rx_sem); |
| } |
| } |
| } |
| |
| /** |
| * @brief Configures receiver context and assigned device. |
| * |
| * @param *ctx: receiver context. |
| * |
| * @retval None. |
| */ |
| static void mdm_receiver_setup(struct mdm_receiver_context *ctx) |
| { |
| __ASSERT(ctx, "invalid ctx"); |
| |
| uart_irq_rx_disable(ctx->uart_dev); |
| uart_irq_tx_disable(ctx->uart_dev); |
| mdm_receiver_flush(ctx); |
| uart_irq_callback_set(ctx->uart_dev, mdm_receiver_isr); |
| uart_irq_rx_enable(ctx->uart_dev); |
| } |
| |
| struct mdm_receiver_context *mdm_receiver_context_from_id(int id) |
| { |
| if (id >= 0 && id < MAX_MDM_CTX) { |
| return contexts[id]; |
| } else { |
| return NULL; |
| } |
| } |
| |
| int mdm_receiver_recv(struct mdm_receiver_context *ctx, |
| uint8_t *buf, size_t size, size_t *bytes_read) |
| { |
| if (!ctx) { |
| return -EINVAL; |
| } |
| |
| if (size == 0) { |
| *bytes_read = 0; |
| return 0; |
| } |
| |
| *bytes_read = ring_buf_get(&ctx->rx_rb, buf, size); |
| return 0; |
| } |
| |
| int mdm_receiver_send(struct mdm_receiver_context *ctx, |
| const uint8_t *buf, size_t size) |
| { |
| if (!ctx) { |
| return -EINVAL; |
| } |
| |
| if (size == 0) { |
| return 0; |
| } |
| |
| do { |
| uart_poll_out(ctx->uart_dev, *buf++); |
| } while (--size); |
| |
| return 0; |
| } |
| |
| int mdm_receiver_sleep(struct mdm_receiver_context *ctx) |
| { |
| uart_irq_rx_disable(ctx->uart_dev); |
| #ifdef CONFIG_PM_DEVICE |
| pm_device_state_set(ctx->uart_dev, PM_DEVICE_STATE_SUSPENDED); |
| #endif |
| return 0; |
| } |
| |
| int mdm_receiver_wake(struct mdm_receiver_context *ctx) |
| { |
| #ifdef CONFIG_PM_DEVICE |
| pm_device_state_set(ctx->uart_dev, PM_DEVICE_STATE_ACTIVE); |
| #endif |
| uart_irq_rx_enable(ctx->uart_dev); |
| |
| return 0; |
| } |
| |
| int mdm_receiver_register(struct mdm_receiver_context *ctx, |
| const struct device *uart_dev, |
| uint8_t *buf, size_t size) |
| { |
| int ret; |
| |
| if ((!ctx) || (size == 0)) { |
| return -EINVAL; |
| } |
| |
| if (!device_is_ready(uart_dev)) { |
| LOG_ERR("Device is not ready: %s", |
| uart_dev ? uart_dev->name : "<null>"); |
| return -ENODEV; |
| } |
| |
| ctx->uart_dev = uart_dev; |
| ring_buf_init(&ctx->rx_rb, size, buf); |
| k_sem_init(&ctx->rx_sem, 0, 1); |
| |
| ret = mdm_receiver_get(ctx); |
| if (ret < 0) { |
| return ret; |
| } |
| |
| mdm_receiver_setup(ctx); |
| return 0; |
| } |