| /* |
| * Copyright (c) 2021 Henrik Brix Andersen <henrik@brixandersen.dk> |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| |
| #include <skeleton.dtsi> |
| #include <zephyr/dt-bindings/gpio/gpio.h> |
| |
| / { |
| chosen { |
| zephyr,entropy = &trng; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "neorv32-cpu"; |
| reg = <0>; |
| device_type = "cpu"; |
| |
| intc: interrupt-controller { |
| compatible = "riscv,cpu-intc"; |
| interrupt-controller; |
| #address-cells = <1>; |
| #interrupt-cells = <1>; |
| |
| firq: firq { |
| interrupt-map-mask = <0x0 0xffffffff>; |
| interrupt-map = < |
| 0 0 &intc 0 16 |
| 0 1 &intc 0 17 |
| 0 2 &intc 0 18 |
| 0 3 &intc 0 19 |
| 0 4 &intc 0 20 |
| 0 5 &intc 0 21 |
| 0 6 &intc 0 22 |
| 0 7 &intc 0 23 |
| 0 8 &intc 0 24 |
| 0 9 &intc 0 25 |
| 0 10 &intc 0 26 |
| 0 11 &intc 0 27 |
| 0 12 &intc 0 28 |
| 0 13 &intc 0 29 |
| 0 14 &intc 0 30 |
| 0 15 &intc 0 31 |
| >; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| }; |
| }; |
| |
| soc { |
| compatible = "simple-bus"; |
| interrupt-parent = <&firq>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| uart0: serial@ffffffa0 { |
| compatible = "neorv32-uart"; |
| status = "disabled"; |
| reg = <0xffffffa0 8>; |
| interrupts = <2>, <3>; |
| interrupt-names = "RX", "TX"; |
| syscon = <&sysinfo>; |
| label = "UART_0"; |
| }; |
| |
| trng: rng@ffffffb8 { |
| compatible = "neorv32-trng"; |
| status = "disabled"; |
| reg = <0xffffffb8 4>; |
| syscon = <&sysinfo>; |
| label = "TRNG"; |
| }; |
| |
| gpio: gpio { |
| compatible = "simple-bus"; |
| gpio-map-mask = <0xffffffe0 0xffffffc0>; |
| gpio-map-pass-thru = <0x1f 0x3f>; |
| gpio-map = < |
| 0x00 0x0 &gpio_lo 0x0 0x0 |
| 0x20 0x0 &gpio_hi 0x0 0x0 |
| >; |
| #gpio-cells = <2>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| ranges; |
| |
| gpio_lo: gpio@ffffffc0 { |
| compatible = "neorv32-gpio"; |
| status = "disabled"; |
| reg = <0xffffffc0 4 0xffffffc8 4>; |
| reg-names = "input", "output"; |
| gpio-controller; |
| ngpios = <32>; |
| syscon = <&sysinfo>; |
| label = "GPIO_LO"; |
| #gpio-cells = <2>; |
| }; |
| |
| gpio_hi: gpio@ffffffc4 { |
| compatible = "neorv32-gpio"; |
| status = "disabled"; |
| reg = <0xffffffc4 4 0xffffffcc 4>; |
| reg-names = "input", "output"; |
| gpio-controller; |
| ngpios = <32>; |
| syscon = <&sysinfo>; |
| label = "GPIO_HI"; |
| #gpio-cells = <2>; |
| }; |
| }; |
| |
| uart1: serial@ffffffd0 { |
| compatible = "neorv32-uart"; |
| status = "disabled"; |
| reg = <0xffffffd0 8>; |
| interrupts = <4>, <5>; |
| interrupt-names = "RX", "TX"; |
| syscon = <&sysinfo>; |
| label = "UART_1"; |
| }; |
| |
| sysinfo: syscon@ffffffe0 { |
| compatible = "neorv-sysinfo", "syscon"; |
| status = "okay"; |
| reg = <0xffffffe0 32>; |
| label = "SYSINFO"; |
| }; |
| }; |
| }; |