| /* |
| * Copyright (c) 2019 SEAL AG |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| #include <arm/armv7-m.dtsi> |
| #include <dt-bindings/clock/kinetis_mcg.h> |
| #include <dt-bindings/clock/kinetis_sim.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/i2c/i2c.h> |
| |
| / { |
| aliases { |
| adc-0 = &adc0; |
| gpio-a = &gpioa; |
| gpio-b = &gpiob; |
| gpio-c = &gpioc; |
| gpio-d = &gpiod; |
| gpio-e = &gpioe; |
| i2c-0 = &i2c0; |
| i2c-1 = &i2c1; |
| i2c-2 = &i2c2; |
| i2c-3 = &i2c3; |
| pinmux-a = &pinmux_a; |
| pinmux-b = &pinmux_b; |
| pinmux-c = &pinmux_c; |
| pinmux-d = &pinmux_d; |
| pinmux-e = &pinmux_e; |
| pwm-0 = &pwm0; |
| pwm-1 = &pwm1; |
| pwm-2 = &pwm2; |
| pwm-3 = &pwm3; |
| rtc-0 = &rtc; |
| spi-0 = &spi0; |
| spi-1 = &spi1; |
| spi-2 = &spi2; |
| uart-0 = &lpuart0; |
| uart-1 = &lpuart1; |
| uart-2 = &lpuart2; |
| uart-3 = &lpuart3; |
| uart-4 = &lpuart4; |
| usbd-0 = &usbd; |
| wdt-0 = &wdog; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-m4f"; |
| reg = <0>; |
| }; |
| }; |
| |
| soc { |
| mpu: mpu@4000d000 { |
| compatible = "nxp,kinetis-mpu"; |
| reg = <0x4000d000 0x1000>; |
| status = "disabled"; |
| }; |
| |
| sim: sim@40047000 { |
| compatible = "nxp,kinetis-sim"; |
| reg = <0x40047000 0x2000>; |
| label = "SIM"; |
| #clock-cells = <3>; |
| }; |
| |
| mcg: clock-controller@40064000 { |
| compatible = "nxp,kinetis-mcg"; |
| reg = <0x40064000 0x1000>; |
| label = "MCG"; |
| #clock-cells = <1>; |
| }; |
| |
| osc: clock-controller@40065000 { |
| compatible = "nxp,k8x-osc"; |
| reg = <0x40065000 0x4>; |
| enable-external-reference; |
| }; |
| |
| flash_controller: flash-controller@40020000 { |
| compatible = "nxp,kinetis-ftfa"; |
| label = "FLASH_CTRL"; |
| reg = <0x40020000 0x1000>; |
| interrupts = <18 0>, <19 0>; |
| interrupt-names = "command-complete", "read-collision"; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| }; |
| |
| adc0: adc@4003b000 { |
| compatible = "nxp,kinetis-adc16"; |
| reg = <0x4003b000 0x1000>; |
| interrupts = <39 0>; |
| label = "ADC_0"; |
| status = "disabled"; |
| }; |
| |
| gpioa: gpio@400ff000 { |
| compatible = "nxp,kinetis-gpio"; |
| reg = <0x400ff000 0x40>; |
| interrupts = <59 2>; |
| label = "GPIO_0"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpiob: gpio@400ff040 { |
| compatible = "nxp,kinetis-gpio"; |
| reg = <0x400ff040 0x40>; |
| interrupts = <60 2>; |
| label = "GPIO_1"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpioc: gpio@400ff080 { |
| compatible = "nxp,kinetis-gpio"; |
| reg = <0x400ff080 0x40>; |
| interrupts = <61 2>; |
| label = "GPIO_2"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpiod: gpio@400ff0c0 { |
| compatible = "nxp,kinetis-gpio"; |
| reg = <0x400ff0c0 0x40>; |
| interrupts = <62 2>; |
| label = "GPIO_3"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| gpioe: gpio@400ff100 { |
| compatible = "nxp,kinetis-gpio"; |
| reg = <0x400ff100 0x40>; |
| interrupts = <63 2>; |
| label = "GPIO_4"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| }; |
| |
| i2c0: i2c@40066000 { |
| compatible = "nxp,kinetis-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40066000 0x1000>; |
| interrupts = <24 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 6>; |
| label = "I2C_0"; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@40067000 { |
| compatible = "nxp,kinetis-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x40067000 0x1000>; |
| interrupts = <25 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 7>; |
| label = "I2C_1"; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@400e6000 { |
| compatible = "nxp,kinetis-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x400e6000 0x1000>; |
| interrupts = <74 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1028 6>; |
| label = "I2C_2"; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@400e7000 { |
| compatible = "nxp,kinetis-i2c"; |
| clock-frequency = <I2C_BITRATE_STANDARD>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x400e7000 0x1000>; |
| interrupts = <91 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1028 7>; |
| label = "I2C_3"; |
| status = "disabled"; |
| }; |
| |
| lpuart0: lpuart@400c4000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x400c4000 0x1000>; |
| interrupts = <30 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 4>; |
| label = "UART_0"; |
| status = "disabled"; |
| }; |
| |
| lpuart1: lpuart@400c5000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x400c5000 0x1000>; |
| interrupts = <31 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 5>; |
| label = "UART_1"; |
| status = "disabled"; |
| }; |
| |
| lpuart2: lpuart@400c6000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x400c6000 0x1000>; |
| interrupts = <32 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 6>; |
| label = "UART_2"; |
| status = "disabled"; |
| }; |
| |
| lpuart3: lpuart@400c7000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x400c7000 0x1000>; |
| interrupts = <33 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 7>; |
| label = "UART_3"; |
| status = "disabled"; |
| }; |
| |
| lpuart4: lpuart@400d6000 { |
| compatible = "nxp,kinetis-lpuart"; |
| reg = <0x400d6000 0x1000>; |
| interrupts = <34 0>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x102c 22>; |
| label = "UART_4"; |
| status = "disabled"; |
| }; |
| |
| pinmux_a: pinmux@40049000 { |
| compatible = "nxp,kinetis-pinmux"; |
| reg = <0x40049000 0x1000>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 9>; |
| }; |
| |
| pinmux_b: pinmux@4004a000 { |
| compatible = "nxp,kinetis-pinmux"; |
| reg = <0x4004a000 0x1000>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 10>; |
| }; |
| |
| pinmux_c: pinmux@4004b000 { |
| compatible = "nxp,kinetis-pinmux"; |
| reg = <0x4004b000 0x1000>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 11>; |
| }; |
| |
| pinmux_d: pinmux@4004c000 { |
| compatible = "nxp,kinetis-pinmux"; |
| reg = <0x4004c000 0x1000>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 12>; |
| }; |
| |
| pinmux_e: pinmux@4004d000 { |
| compatible = "nxp,kinetis-pinmux"; |
| reg = <0x4004d000 0x1000>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1038 13>; |
| }; |
| |
| pwm0: pwm@40038000 { |
| compatible = "nxp,kinetis-ftm"; |
| reg = <0x40038000 0x1000>; |
| interrupts = <42 0>; |
| clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>; |
| label = "PWM_0"; |
| status = "disabled"; |
| #pwm-cells = <2>; |
| }; |
| |
| pwm1: pwm@40039000 { |
| compatible = "nxp,kinetis-ftm"; |
| reg = <0x40039000 0x1000>; |
| interrupts = <43 0>; |
| clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>; |
| label = "PWM_1"; |
| status = "disabled"; |
| #pwm-cells = <2>; |
| }; |
| |
| pwm2: pwm@4003a000 { |
| compatible = "nxp,kinetis-ftm"; |
| reg = <0x4003a000 0x1000>; |
| interrupts = <44 0>; |
| clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>; |
| label = "PWM_2"; |
| status = "disabled"; |
| #pwm-cells = <2>; |
| }; |
| |
| pwm3: pwm@400b9000 { |
| compatible = "nxp,kinetis-ftm"; |
| reg = <0x400b9000 0x1000>; |
| interrupts = <71 0>; |
| clocks = <&mcg KINETIS_MCG_FIXED_FREQ_CLK>; |
| label = "PWM_3"; |
| status = "disabled"; |
| #pwm-cells = <2>; |
| }; |
| |
| rtc: rtc@4003d000 { |
| compatible = "nxp,kinetis-rtc"; |
| reg = <0x4003d000 0x1000>; |
| interrupts = <46 0>, <47 0>; |
| interrupt-names = "alarm", "seconds"; |
| clock-frequency = <32768>; |
| prescaler = <32768>; |
| label = "RTC_0"; |
| }; |
| |
| spi0: spi@4002c000 { |
| compatible = "nxp,kinetis-dspi"; |
| reg = <0x4002c000 0x1000>; |
| interrupts = <26 3>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x103c 12>; |
| label = "SPI_0"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@4002d000 { |
| compatible = "nxp,kinetis-dspi"; |
| reg = <0x4002d000 0x1000>; |
| interrupts = <27 3>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x103c 13>; |
| label = "SPI_1"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@400ac000 { |
| compatible = "nxp,kinetis-dspi"; |
| reg = <0x400ac000 0x1000>; |
| interrupts = <65 3>; |
| clocks = <&sim KINETIS_SIM_BUS_CLK 0x1030 12>; |
| label = "SPI_2"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| trng: random@400a0000 { |
| compatible = "nxp,kinetis-trng"; |
| reg = <0x400a0000 0x1000>; |
| interrupts = <23 0>; |
| label = "TRNG"; |
| }; |
| |
| usbd: usbd@40072000 { |
| compatible = "nxp,kinetis-usbd"; |
| reg = <0x40072000 0x1000>; |
| interrupts = <53 1>; |
| interrupt-names = "usb_otg"; |
| num-bidir-endpoints = <16>; |
| status = "disabled"; |
| label = "USBD"; |
| }; |
| |
| wdog: watchdog@40052000 { |
| compatible = "nxp,kinetis-wdog"; |
| reg = <0x40052000 0x1000>; |
| interrupts = <22 0>; |
| clocks = <&sim KINETIS_SIM_LPO_CLK 0 0>; |
| label = "WDT_0"; |
| }; |
| }; |
| }; |
| |
| &nvic { |
| arm,num-irq-priority-bits = <4>; |
| }; |
