blob: 548a3fb8fc20f0735466fbef52b386723dc213df [file] [log] [blame]
/*
* Copyright (c) 2017 Linaro Limited
*
* SPDX-License-Identifier: Apache-2.0
*/
#include <st/f4/stm32f405-pinctrl.dtsi>
#include <st/f4/stm32f401.dtsi>
/ {
soc {
pinctrl: pin-controller@40020000 {
reg = <0x40020000 0x2400>;
gpiof: gpio@40021400 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x40021400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000020>;
label = "GPIOF";
};
gpiog: gpio@40021800 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x40021800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000040>;
label = "GPIOG";
};
gpioi: gpio@40022000 {
compatible = "st,stm32-gpio";
gpio-controller;
#gpio-cells = <2>;
reg = <0x40022000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x00000100>;
label = "GPIOI";
};
};
usart3: serial@40004800 {
compatible = "st,stm32-usart", "st,stm32-uart";
reg = <0x40004800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00040000>;
interrupts = <39 0>;
status = "disabled";
label = "UART_3";
};
uart4: serial@40004c00 {
compatible ="st,stm32-uart";
reg = <0x40004c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00080000>;
interrupts = <52 0>;
status = "disabled";
label = "UART_4";
};
uart5: serial@40005000 {
compatible = "st,stm32-uart";
reg = <0x40005000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>;
interrupts = <53 0>;
status = "disabled";
label = "UART_5";
};
timers6: timers@40001000 {
compatible = "st,stm32-timers";
reg = <0x40001000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000010>;
status = "disabled";
label = "TIMERS_6";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
st,prescaler = <10000>;
label = "PWM_6";
#pwm-cells = <2>;
};
};
timers7: timers@40001400 {
compatible = "st,stm32-timers";
reg = <0x40001400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000020>;
status = "disabled";
label = "TIMERS_7";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
st,prescaler = <10000>;
label = "PWM_7";
#pwm-cells = <2>;
};
};
timers8: timers@40010400 {
compatible = "st,stm32-timers";
reg = <0x40010400 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000002>;
status = "disabled";
label = "TIMERS_8";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
st,prescaler = <10000>;
label = "PWM_8";
#pwm-cells = <2>;
};
};
timers12: timers@40001800 {
compatible = "st,stm32-timers";
reg = <0x40001800 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000040>;
status = "disabled";
label = "TIMERS_12";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
st,prescaler = <10000>;
label = "PWM_12";
#pwm-cells = <2>;
};
};
timers13: timers@40001c00 {
compatible = "st,stm32-timers";
reg = <0x40001c00 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000080>;
status = "disabled";
label = "TIMERS_13";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
st,prescaler = <10000>;
label = "PWM_13";
#pwm-cells = <2>;
};
};
timers14: timers@40002000 {
compatible = "st,stm32-timers";
reg = <0x40002000 0x400>;
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00000100>;
status = "disabled";
label = "TIMERS_14";
pwm {
compatible = "st,stm32-pwm";
status = "disabled";
st,prescaler = <10000>;
label = "PWM_14";
#pwm-cells = <2>;
};
};
usbotg_hs: usb@40040000 {
compatible = "st,stm32-otghs", "st,stm32-otgfs";
reg = <0x40040000 0x40000>;
interrupts = <77 0>, <74 0>, <75 0>;
interrupt-names = "otghs", "ep1_out", "ep1_in";
num-bidir-endpoints = <6>;
ram-size = <4096>;
maximum-speed = "full-speed";
phys = <&otghs_fs_phy>;
clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x20000000>;
status = "disabled";
label= "OTGHS";
};
can1: can@40006400 {
compatible = "st,stm32-can";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x40006400 0x400>;
interrupts = <19 0>, <20 0>, <21 0>, <22 0>;
interrupt-names = "TX", "RX0", "RX1", "SCE";
clocks = <&rcc STM32_CLOCK_BUS_APB1 0x02000000>;
status = "disabled";
label = "CAN_1";
bus-speed = <125000>;
sjw = <1>;
prop-seg = <0>;
phase-seg1 = <5>;
phase-seg2 = <6>;
};
};
otghs_fs_phy: otghs_fs_phy {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
label = "OTGHS_FS_PHY";
};
};