| # Copyright 2019-2020 Peter Bigot Consulting, LLC |
| # SPDX-License-Identifier: Apache-2.0 |
| |
| description: GPIO-controlled regulators |
| |
| include: |
| - name: base.yaml |
| - name: regulator.yaml |
| property-allowlist: |
| - regulator-name |
| - regulator-boot-on |
| - regulator-always-on |
| |
| compatible: "regulator-fixed" |
| |
| properties: |
| regulator-name: |
| required: true |
| |
| enable-gpios: |
| type: phandle-array |
| required: true |
| description: | |
| GPIO to use to enable/disable the regulator. |
| |
| Unlike the gpio property in the Linux bindings this array must |
| provide the GPIO polarity and open-drain status in the phandle |
| selector. The Linux enable-active-high and gpio-open-drain |
| properties are not valid for Zephyr devicetree files. |
| |
| startup-delay-us: |
| type: int |
| default: 0 |
| description: Startup time, in microseconds |
| |
| off-on-delay-us: |
| type: int |
| default: 0 |
| description: Off delay time, in microseconds |