| .. _usb-c-sink-sample: |
| |
| Basic USB-C SINK |
| ################ |
| |
| Overview |
| ******** |
| |
| This example demonstrates how to create a USB-C Power Delivery application |
| using the USB-C subsystem. The application implements a USB-C Sink device. |
| |
| After the USB-C Sink device is plugged into a Power Delivery charger, it |
| negotiates with the charger to provide 5V@100mA and displays all |
| Power Delivery Objects (PDOs) provided by the charger. |
| |
| .. _usb-c-sink-sample-requirements: |
| |
| Requirements |
| ************ |
| The TCPC device used by the sample is specified in the devicetree |
| node that's compatible with ``usb-c-connector``. |
| The sample has been tested on :ref:`b_g474e_dpow1_board` and |
| :ref:`stm32g081b_eval_board`. Overlay files for the two boards |
| are provided. |
| |
| Building and Running |
| ******************** |
| |
| Build and flash as follows, changing ``b_g474e_dpow1`` for your board: |
| |
| .. zephyr-app-commands:: |
| :zephyr-app: samples/subsys/usb-c/sink |
| :board: b_g474e_dpow1 |
| :goals: build flash |
| :compact: |
| |
| Connect a charger and see console output: |
| |
| Sample Output |
| ============= |
| |
| .. code-block:: console |
| |
| Unattached.SNK |
| AttachWait.SNK |
| Attached.SNK |
| PE_SNK_Startup |
| PRL_INIT |
| PRL_HR_Wait_for_Request |
| PRL_Tx_PHY_Layer_Reset |
| PRL_Tx_Wait_for_Message_Request |
| PE_SNK_Discovery |
| PE_SNK_Wait_For_Capabilities |
| RECV 4161/4 [0]0a01912c [1]0002d12c [2]0004b12c [3]000640e1 |
| PE_SNK_Evaluate_Capability |
| PE_SNK_Select_Capability |
| PRL_Tx_Wait_for_PHY_response |
| PWR 3A0 |
| |
| RECV 0363/0 |
| PRL_Tx_Wait_for_Message_Request |
| PE_SNK_Transition_Sink |
| RECV 0566/0 |
| Source Caps: |
| PDO 0: |
| Type: FIXED |
| Current: 3000 |
| Voltage: 5000 |
| Peak Current: 0 |
| Uchunked Support: 0 |
| Dual Role Data: 1 |
| USB Comms: 0 |
| Unconstrained Pwr: 1 |
| USB Susspend: 0 |
| Dual Role Power: 0 |
| PDO 1: |
| Type: FIXED |
| Current: 3000 |
| Voltage: 9000 |
| Peak Current: 0 |
| Uchunked Support: 0 |
| Dual Role Data: 0 |
| USB Comms: 0 |
| Unconstrained Pwr: 0 |
| USB Susspend: 0 |
| Dual Role Power: 0 |
| PDO 2: |
| Type: FIXED |
| Current: 3000 |
| Voltage: 15000 |
| Peak Current: 0 |
| Uchunked Support: 0 |
| Dual Role Data: 0 |
| USB Comms: 0 |
| Unconstrained Pwr: 0 |
| USB Susspend: 0 |
| Dual Role Power: 0 |
| PDO 3: |
| Type: FIXED |
| Current: 2250 |
| Voltage: 20000 |
| Peak Current: 0 |
| Uchunked Support: 0 |
| Dual Role Data: 0 |
| USB Comms: 0 |
| Unconstrained Pwr: 0 |
| USB Susspend: 0 |
| Dual Role Power: 0 |
| PE_SNK_Ready |
