| /* |
| * Copyright (c) 2018 Yurii Hamann |
| * |
| * SPDX-License-Identifier: Apache-2.0 |
| */ |
| |
| /dts-v1/; |
| #include <st/f7/stm32f746Xg.dtsi> |
| #include <st/f7/stm32f746nghx-pinctrl.dtsi> |
| #include "arduino_r3_connector.dtsi" |
| #include <zephyr/dt-bindings/input/input-event-codes.h> |
| #include <zephyr/dt-bindings/memory-attr/memory-attr.h> |
| #include <zephyr/dt-bindings/memory-attr/memory-attr-arm.h> |
| |
| / { |
| model = "STMicroelectronics STM32F746G DISCOVERY board"; |
| compatible = "st,stm32f746g-disco"; |
| |
| chosen { |
| zephyr,console = &usart1; |
| zephyr,shell-uart = &usart1; |
| zephyr,sram = &sram0; |
| zephyr,flash = &flash0; |
| zephyr,dtcm = &dtcm; |
| zephyr,flash-controller = &n25q128a1; |
| zephyr,display = <dc; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| green_led_1: led_1 { |
| gpios = <&gpioi 1 GPIO_ACTIVE_HIGH>; |
| label = "User LD1"; |
| }; |
| }; |
| |
| gpio_keys { |
| compatible = "gpio-keys"; |
| user_button: button { |
| label = "User"; |
| gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>; |
| zephyr,code = <INPUT_KEY_0>; |
| }; |
| }; |
| |
| lvgl_pointer { |
| compatible = "zephyr,lvgl-pointer-input"; |
| input = <&ft5336>; |
| }; |
| |
| sdram1: sdram@c0000000 { |
| compatible = "zephyr,memory-region", "mmio-sram"; |
| device_type = "memory"; |
| reg = <0xc0000000 DT_SIZE_M(16)>; |
| zephyr,memory-region = "SDRAM1"; |
| zephyr,memory-attr = <( DT_MEM_ARM(ATTR_MPU_RAM) )>; |
| }; |
| |
| aliases { |
| led0 = &green_led_1; |
| sw0 = &user_button; |
| spi-flash0 = &n25q128a1; |
| }; |
| }; |
| |
| &clk_lsi { |
| status = "okay"; |
| }; |
| |
| &clk_hse { |
| clock-frequency = <DT_FREQ_M(25)>; |
| status = "okay"; |
| }; |
| |
| &pll { |
| div-m = <25>; |
| mul-n = <432>; |
| div-p = <2>; |
| div-q = <9>; |
| clocks = <&clk_hse>; |
| status = "okay"; |
| }; |
| |
| &rcc { |
| clocks = <&pll>; |
| clock-frequency = <DT_FREQ_M(216)>; |
| ahb-prescaler = <1>; |
| apb1-prescaler = <4>; |
| apb2-prescaler = <2>; |
| }; |
| |
| &i2c1 { |
| pinctrl-0 = <&i2c1_scl_pb8 &i2c1_sda_pb9>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| clock-frequency = <I2C_BITRATE_FAST>; |
| }; |
| |
| &i2c3 { |
| pinctrl-0 = <&i2c3_scl_ph7 &i2c3_sda_ph8>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| clock-frequency = <I2C_BITRATE_FAST>; |
| |
| ft5336: ft5336@38 { |
| compatible = "focaltech,ft5336"; |
| reg = <0x38>; |
| int-gpios = <&gpioi 13 0>; |
| }; |
| }; |
| |
| &spi2 { |
| pinctrl-0 = <&spi2_sck_pi1 &spi2_miso_pb14 &spi2_mosi_pb15>; |
| pinctrl-names = "default"; |
| cs-gpios = <&gpioa 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; |
| status = "okay"; |
| }; |
| |
| &usart1 { |
| pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pb7>; |
| pinctrl-names = "default"; |
| current-speed = <115200>; |
| status = "okay"; |
| }; |
| |
| &usart6 { |
| pinctrl-0 = <&usart6_tx_pc6 &usart6_rx_pc7>; |
| pinctrl-names = "default"; |
| current-speed = <115200>; |
| status = "okay"; |
| }; |
| |
| zephyr_udc0: &usbotg_fs { |
| pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| }; |
| |
| &timers3 { |
| st,prescaler = <10000>; |
| status = "okay"; |
| |
| pwm3: pwm { |
| status = "okay"; |
| pinctrl-0 = <&tim3_ch1_pb4>; |
| pinctrl-names = "default"; |
| }; |
| }; |
| |
| &rtc { |
| clocks = <&rcc STM32_CLOCK_BUS_APB1 0x10000000>, |
| <&rcc STM32_SRC_LSI RTC_SEL(2)>; |
| status = "okay"; |
| |
| backup_regs { |
| status = "okay"; |
| }; |
| }; |
| |
| &sdmmc1 { |
| status = "okay"; |
| pinctrl-0 = <&sdmmc1_d0_pc8 &sdmmc1_d1_pc9 |
| &sdmmc1_d2_pc10 &sdmmc1_d3_pc11 |
| &sdmmc1_ck_pc12 &sdmmc1_cmd_pd2>; |
| pinctrl-names = "default"; |
| cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>; |
| }; |
| |
| &mac { |
| status = "okay"; |
| pinctrl-0 = <ð_mdc_pc1 |
| ð_rxd0_pc4 |
| ð_rxd1_pc5 |
| ð_ref_clk_pa1 |
| ð_mdio_pa2 |
| ð_crs_dv_pa7 |
| ð_tx_en_pg11 |
| ð_txd0_pg13 |
| ð_txd1_pg14>; |
| pinctrl-names = "default"; |
| }; |
| |
| &quadspi { |
| pinctrl-0 = <&quadspi_clk_pb2 &quadspi_bk1_ncs_pb6 |
| &quadspi_bk1_io0_pd11 &quadspi_bk1_io1_pd12 |
| &quadspi_bk1_io2_pe2 &quadspi_bk1_io3_pd13>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| n25q128a1: qspi-nor-flash@90000000 { |
| compatible = "st,stm32-qspi-nor"; |
| reg = <0x90000000 DT_SIZE_M(16)>; /* 128 Mbits */ |
| qspi-max-frequency = <72000000>; |
| status = "okay"; |
| |
| partitions { |
| compatible = "fixed-partitions"; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| slot1_partition: partition@0 { |
| label = "image-1"; |
| reg = <0x00000000 DT_SIZE_K(640)>; |
| }; |
| |
| storage_partition: partition@a0000 { |
| label = "storage"; |
| reg = <0x000a0000 DT_SIZE_M(15)>; |
| }; |
| }; |
| }; |
| }; |
| |
| &fmc { |
| pinctrl-0 = <&fmc_nbl0_pe0 &fmc_nbl1_pe1 |
| &fmc_sdclk_pg8 &fmc_sdnwe_ph5 &fmc_sdcke0_pc3 |
| &fmc_sdne0_ph3 &fmc_sdnras_pf11 &fmc_sdncas_pg15 |
| &fmc_a0_pf0 &fmc_a1_pf1 &fmc_a2_pf2 &fmc_a3_pf3 &fmc_a4_pf4 |
| &fmc_a5_pf5 &fmc_a6_pf12 &fmc_a7_pf13 &fmc_a8_pf14 |
| &fmc_a9_pf15 &fmc_a10_pg0 &fmc_a11_pg1 |
| &fmc_a14_pg4 &fmc_a15_pg5 &fmc_d0_pd14 &fmc_d1_pd15 |
| &fmc_d2_pd0 &fmc_d3_pd1 &fmc_d4_pe7 &fmc_d5_pe8 &fmc_d6_pe9 |
| &fmc_d7_pe10 &fmc_d8_pe11 &fmc_d9_pe12 &fmc_d10_pe13 |
| &fmc_d11_pe14 &fmc_d12_pe15 &fmc_d13_pd8 &fmc_d14_pd9 |
| &fmc_d15_pd10>; |
| pinctrl-names = "default"; |
| status = "okay"; |
| |
| sdram { |
| status = "okay"; |
| power-up-delay = <100>; |
| num-auto-refresh = <8>; |
| mode-register = <0x220>; |
| /* |
| * Auto refresh command shall be issued every 15.625 us |
| * and is calculated as ((15.625 * SDRAM_CLK_MHZ) - 20) |
| * Note: SDRAM_CLK_MHZ = HCLK_MHZ / 2 (108 MHz) |
| */ |
| refresh-rate = <1667>; |
| bank@0 { |
| reg = <0>; |
| st,sdram-control = <STM32_FMC_SDRAM_NC_8 |
| STM32_FMC_SDRAM_NR_12 |
| STM32_FMC_SDRAM_MWID_16 |
| STM32_FMC_SDRAM_NB_4 |
| STM32_FMC_SDRAM_CAS_2 |
| STM32_FMC_SDRAM_SDCLK_PERIOD_2 |
| STM32_FMC_SDRAM_RBURST_ENABLE |
| STM32_FMC_SDRAM_RPIPE_0>; |
| st,sdram-timing = <2 6 4 6 2 2 2>; |
| }; |
| }; |
| }; |
| |
| <dc { |
| pinctrl-0 = <<dc_r0_pi15 <dc_r1_pj0 <dc_r2_pj1 <dc_r3_pj2 |
| <dc_r4_pj3 <dc_r5_pj4 <dc_r6_pj5 <dc_r7_pj6 |
| <dc_g0_pj7 <dc_g1_pj8 <dc_g2_pj9 <dc_g3_pj10 |
| <dc_g4_pj11 <dc_g5_pk0 <dc_g6_pk1 <dc_g7_pk2 |
| <dc_b0_pe4 <dc_b1_pj13 <dc_b2_pj14 <dc_b3_pj15 |
| <dc_b4_pg12 <dc_b5_pk4 <dc_b6_pk5 <dc_b7_pk6 |
| <dc_de_pk7 <dc_clk_pi14 <dc_hsync_pi10 <dc_vsync_pi9>; |
| pinctrl-names = "default"; |
| disp-on-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>; |
| bl-ctrl-gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>; |
| ext-sdram = <&sdram1>; |
| status = "okay"; |
| |
| width = <480>; |
| height = <272>; |
| pixel-format = <PANEL_PIXEL_FORMAT_RGB_565>; |
| display-timings { |
| compatible = "zephyr,panel-timing"; |
| de-active = <0>; |
| pixelclk-active = <0>; |
| hsync-active = <0>; |
| vsync-active = <0>; |
| hsync-len = <1>; |
| vsync-len = <10>; |
| hback-porch = <43>; |
| vback-porch = <12>; |
| hfront-porch = <8>; |
| vfront-porch = <4>; |
| }; |
| def-back-color-red = <0xFF>; |
| def-back-color-green = <0xFF>; |
| def-back-color-blue = <0xFF>; |
| }; |